RCA DRC6307E User Manual page 2

Drc6307e product manual

Hide thumbs

page of 2

/ 2
Bookmarks

Playing a disc (basic playback)

Playing a disc

Stopping playback

1. Slide the

switch on

Press the

button at the location where you

the left side of the unit to the ON position.

want to interrupt playback. To resume playback at

See Customizing the function settings before

the position where the disc was stopped, press the

proceeding to step 2.

button.

If you press the

button twice, the unit's

2. Slide the

knob rightwards to open the

disc door.

memory will be cleared and pressing the

3. Hold the disc by its sides and carefully place it

button will reset the DVD to the beginning.

onto the spindle with the label side facing up,

pushing gently until you hear a "click".

Fast forward / Fast reverse

4. Close the disc door. It takes a short while for

1. Press the

your unit to load the disc. After loading, the unit

when a disc is playing. Each time you press the

will automatically bring you to the main menu of

the DVD or start playing the DVD.

speed changes in the following sequence:

5. If the unit does not automatically start playing

the DVD, press the

button.

Pausing playback (still mode)

2. Press the

button when you reach the

Press the

button. To resume normal

desired point to resume normal playback.

playback, press the

button.

For a DVD, each time you press the

button,

•

The DVD player mutes sound and subtitles

the picture advances one frame.

during reverse and forward scan of DVDs.

•

The fast playback speed may differ depending

on the disc.

Locating a desired section

Locating a specifi c chapter

If you know the chapter number for the chapter that you want to play, you can locate it by directly selecting that

number.

1. Press the

button.

Title 01/03 Chapter 03/12

2. Press the corresponding number buttons (2 digits) for the chapter you want (for example: 02, 08, 10 or 15.

If you press only 1 numeric button, press the

button to confi rm).

3. Playback starts from the selected chapter.

•

If the chapter number entered is not permitted by the DVD, "

" will display. You should press

Input invalid

the

button again and re-enter correct number.

•

Some discs may not respond to this process.

•

This method of locating a chapter is available only on a DVD that contains chapter numbers.

Locating a specifi c title

If a DVD contains title numbers, you can locate a specifi c title by directly selecting its title number.

1. Press the

button.

Title 01/03 Chapter 00/00

2. Press the

button to highlight title number, press the corresponding number buttons (2 digits) for the

title you want (for example: 02, 08, 10 or 15. If you press only 1 numeric button, press the

confi rm).

3. Playback starts from the selected title.

•

If the title number entered is not permitted by the DVD, "

" will display. You should repeat

Input invalid

steps 1 and 2 to re-enter correct numbers.

•

Some discs may not respond to this process.

•

This method of locating a title is available only on a DVD that contains title numbers.

Customizing the function settings

Language setup

Language

Video

1. Press the

button in stop mode.

- - Language Setup Page - -

2. Press the

button to select Language Setup Page.

3. Press the

button to select the option (OSD Language,

OSD Language

Eng

Audio

Eng

Audio, Subtitle or Disc Menu), then press the

button.

Subtitle

Off

4. Press the

button to select your preferred language,

Disc Menu

Eng

then press the

button to confi rm.

5. Repeat steps 3 and 4 to adjust other options. Press the

button to return to the previous menu.

6. Press the

button to exit the menu.

Go To Language Setup Page

•

Some DVDs may not play in the audio language you selected. A prior language may be programmed on

the disc.

•

Some DVDs may be set to display subtitles in a language other than the one you selected. A prior subtitle

language may be programmed on the disc.

•

Some DVDs allow you to change subtitle selections using the disc menu only. If this is the case, press the

button and choose the appropriate subtitle language from the selection on the disc menu.

•

Some DVDs may not include your pre-selected language. In this case, the DVD player automatically displays

disc menus consistent with the disc's initial language setting.

Video setup

Language

Video

1. Press the

button in stop mode.

- - Video Setup Page - -

2. Press the

button to select Video Setup Page.

Brightness

3. Press the

button to select the option (Brightness or

Contrast

Contrast), then press the

button.

4. Press the

button to adjust the setting, then press the

button to confi rm.

5. Repeat steps 3 and 4 to adjust other options. Press the

button to return to the previous menu.

6. Press the

button to exit the menu.

Go To Video Setup Page

Skip (forward / reverse)

Subtitle selection

•

Press the

button to advance chapters/

1. While a DVD is playing, press the

tracks.

button to display the current language setting,

•

Press the

button to go back to current

as shown in the example.

or previous chapters/tracks.

•

For an Audio CD, use the number buttons on the

2. Press the

remote control to go directly to the desired track

the desired subtitle language. You can turn

number.

subtitles off by pressing the

repeatedly until the "

Audio selection

On some DVDs, the sound is recorded in two or more

•

S o m e D V D s a r e s e t t o d i s p l a y s u b t i t l e s

formats. Follow the directions below to select the

automatically, and you cannot turn them off

preferred language and sound system.

even if you set the subtitle function to off .

1. While a disc is playing, press the

button

•

During some scenes, the subtitles may not

to show the current audio format number.

appear immediately after you select your desired

Audio 1/3:Dolby D 2ch English

scene.

•

The number of subtitle languages recorded

2. Press the

button repeatedly to select the

differs depending on the disc. I f only one

desired audio format.

button

language is recorded, the language does not

change.

button, the playback

•

If only one audio format is recorded on the DVD,

•

This function can only be used for discs on

the number does not change.

which subtitles have been recorded in multiple

•

Some DVDs allow you to change audio selections

16 x

languages.

using the disc menu only. If this is the case, press

•

Some DVDs allow you to change subtitles using

the

button and choose the appropriate

16 x

the disc menu only. If this is the case, press

language on the disc menu.

the

•

You can select different audio channels (Stereo,

subtitle on the disc menu.

Mono Left, Mono Right or Mix-Mono) on an

Au d i o C D b y p re s s i n g t h e

b u t t o n

repeatedly.

Locating a specifi c time

You can move to a specifi c location by entering its corresponding time (hours, minutes, seconds).

1. Press the

button two times.

Title 01/03 Time

2. Press the corresponding number buttons (5 digits: X:XX:XX, for example: 0 30 05, 1 08 23, 1 22 56) for the

setting point you want.

3. Playback starts from the selected section.

•

If the time entered is not permitted by the DVD, "

Input invalid

time.

•

Some discs may not respond to this process.

•

Some scenes may not be located as precisely as you specifi ed.

•

This method for accessing specifi c locations is available only within the current title of the DVD.

button to

System setup

System

1. Press the

button in stop mode.

2. Press the

button to select System Page.

3. Press the

button to select the option (TV Display or

Default), then press the

button.

4. Press the

button to adjust the settings, then press the

button to confi rm.

5. Repeat steps 3 and 4 to adjust other options. Press the

button to return to the previous menu.

6. Press the

button to exit the menu.

Pan Scan

•

When wide-screen video is played, this mode clips the right and left sides of the

image so that it can be viewed on a conventional screen.

•

Some wide-screen DVDs that do not permit Pan Scan mode playback are

automatically played in letterbox mode (black bands that appear at the top and

bottom of the screen).

Letter Box

•

When wide-screen video is played in this mode on a conventional screen, black

bands appear at the top and bottom of the screen.

Wide Screen

•

This is the correct mode for playing wide-screen videos on the unit screen or

System

other external wide-screens.

•

The displayable picture size is preset on the DVD. Therefore the playback picture

of some DVDs may not conform to the picture size selected.

•

When you play DVDs recorded in the 4:3 aspect ratio, the playback picture will

always appear in the 4:3 aspect ratio regardless of the TV display setting.

•

Select Wide Screen to conform the LCD screen on the unit. Always be sure that

your TV display conforms to the actual TV in use if you connect the unit to a TV.

It takes 3-5 seconds to reset the DVD settings to the factory default.

Angle selection

Some DVDs contain scenes that have been shot from a number of diff erent angles. For these discs, the same

scene can be viewed from each of these diff erent angles.

1. While you are playing a DVD with diff erent angles recorded,

press the

button to view the number of current

Subtitle 02/03:Spanish

angles available.

button repeatedly to select

2. Press the

button repeatedly to change the scene to

the next recorded angle.

button

•

After approx. two seconds, playback will continue from

Subtitle Off

" is displayed.

the new angle selected.

•

If no button is pressed within 10 seconds, playback

continues without changing the current angle.

This function can only be used for discs on which scenes shot from multiple angles have been recorded.

Display function

While the disc is playing, press the

Chapter Elapsed

Tt 01/03 Ch 03/12

0:13:26

0:13:26 Subtitle 02/03:Spanish

Subtitle 02/03:Spanish

Audio 1/3:Dolby D 2ch English

Adjust the LCD screen

You can adjust Brightness, Panel Display and Contrast of the LCD screen.

button and choose the appropriate

1. Press the

button.

2. Press the

button to select Brightness, Panel Display or Contrast.

3. Press the

button to change the setting.

4. Press the

button to exit the menu.

DVD programmable memory

You can combine your favorite titles/chapters and

play them in the order you determine.

1. Press the

button while a disc is

: :

playing. The following display appears.

Tt:01ch:05

Tt: ch:

" will display. You should re-enter correct

Tt: ch:

Clear

Exit

Start

Delete all input programs.

Exit memor y menu and return to normal

playback.

Start memory playback.

Move to the next / previous setup page.

2. Input the title (2 digits) and chapter (2 digits) by

pressing the number buttons (for example: 01

02, 02 05, 02 11). It will move to the next item

automatically.

•

You can use the Cursor buttons ( ,

move the highlighted bar to any item, and re-

enter the title and chapter. Press the

to move to the next / previous setup

page.

•

You can use the Cursor buttons ( ,

move the highlighted bar to "Clear", "Exit", "Start"

or "Next / Prev", then press the

confi rm.

Sound system

Dolby Digital

Language

Video

System

Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can

- - System Page - -

reproduce from one to 5.1 discrete channels of excellent quality audio.

Tv Display

Wide

The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-

Default

channel listening. An additional Dolby Digital decoder is required for reproduction of the discrete multi-channel

soundtracks available on many DVDs.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Go To System Page

Maintenance

Cleaning the disc

Pan Scan

A defective or soiled disc inserted into the unit can cause sound to drop out during playback.

Handle the disc by holding its inner and outer edges.

•

Do NOT touch the surface of the unlabeled side of the disc.

•

Do NOT stick paper or tape on the surface.

•

Do NOT expose the disc to direct sunlight or excessive heat.

•

Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.

•

NEVER use solvents such as benzine or alcohol to clean the disc.

•

Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause malfunctions.

Letter Box

Cleaning the unit

•

Be sure to turn the unit off and disconnect the AC power adapter before cleaning the unit.

•

Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has

been dipped in a weak soap-and-water solution and wrung out thoroughly, then wipe with a dry cloth.

•

Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air to

Wide Screen

remove dust.

Important note

•

Before transporting the unit, remove the disc from the disc compartment.

Repeat playback

You can play a specific title or chapter repeatedly.

(Title repeat, chapter repeat, A-B repeat)

Repeating a chapter

1. While the DVD is playing, press the

1/3

button until the "

on the screen. The current chapter is played

(Example)

repeatedly.

Repeating a title

2. While the DVD is playing, press the

button until the "

the screen. The current title is played repeatedly.

To resume normal playback

3. While the DVD is playing, press the

button until the "

on the screen.

button repeatedly to display information on operation status.

Chapter Remain

Title Remain

Display Off

You can play a single track or the whole disc repeatedly.

Tt 01/03 Ch 03/12

0:05:42 Subtitle 02/03:Spanish

0:05:42

0:36:08 Subtitle 02/03:Spanish

0:36:08

Subtitle 02/03:Spanish

Repeating a single track

Audio 1/3:Dolby D 2ch English

1. While the CD is playing, press the

button until the "

the screen. The current track is played repeatedly.

Repeating the whole disc

2. While the CD is playing, press the

button until the "

the screen. The whole disc is played repeatedly.

To resume normal playback

3. While the CD is playing, press the

button until the "

on the screen.

Viewing JPEG fi les

3. Press the

button to star t memor y

This unit can play JPEG fi les recorded on a CD-R or CD-ROM disc (CD-RW is not recommended).

playback ("

" appears on the screen).

Program

4. To resume normal playback from memor y

Viewing JPEG fi les

playback

1. Slide the

1). Press the

button to display the

2. Hold a JPEG fi le disc by its edges and gently push it onto the

memory menu.

Tt: ch:

spindle with the label side facing up until you hear a "click".

2). Use the Cursor buttons ( ,

, , ) to move

Tt: ch:

3. Close the disc door. The JPEG files on the disc will display

the highlighted bar to "Stop". Press the

Tt: ch:

automatically or a folder list appears.

button to confi rm "Stop".

Tt: ch:

4. Press the

3). Press the

button to resume normal

Tt: ch:

button to highlight a JPEG file to play. Press the

playback from memory playback ("

Program

button to start playback.

disappears from the screen).

•

You can press the

•

If the title or chapter number entered is not

•

You can press the

permitted by the DVD, it will disappear. You

•

You can press the

should re-enter the correct numbers.

•

Some discs may not permit this operation.

•

You should input items one by one following the

1, 2, 3 ... sequence.

•

If the DVD contains only one title, you can only

arrange order for chapters.

•

Some discs may not permit memory playback

operation.

, , ) to

•

If you select repeat during memory playback,

the DVD player repeats the current memory

playback.

•

If you press the

button while the

display appears on the TV screen, the display

, , ) to

disappears.

•

The programmed selections will be cleared when

button to

you press the

button two times, open

the disc tray or turn off the DVD player.

Troubleshooting guide

Symptom

No power.

The remote

control does

not function.

No sound or

only a very

low-level

sound is

heard.

No picture.

The picture is

not clear.

Severe hum or

noise is heard.

The disc does

not play.

Printed in China

Repeating a specifi c section

You can play a specifi c section repeatedly.

1. While the disc is playing, press the

button at the beginning of the section ("

is displayed) you want to play repeatedly.

" indicator displays

Chapter

2. Press the

button again at the end of

the section ("

" is displayed).

3. The unit will immediately begin replaying your

selection.

To resume normal playback

" indicator displays on

Title

4. While the disc is playing, press the

button until the "

" indicator displays

AB OFF

on the screen.

Repeat Off

" indicator displays

•

Some discs may not permit A-B repeat operation.

•

You cannot set the A-B repeat function for a

segment that includes multiple camera angles.

•

You can specify a segment only within the

current title or track.

•

There may be a slight difference between point

A and the location where playback actually

" indicator displays on

Repeat One

resumes depending on the disc.

" indicator displays on

Repeat All

" indicator displays

Repeat Off

00:00

001/035

knob rightwards to open the disc door.

DSCN0281

DSCN0282

DSCN0283

DSCN0284

button to display a folder list. Press the

DSCN0285

DSCN0286

button to freeze the picture. Press the

button to resume picture slide show.

button to change the picture.

button to rotate direction of the picture by 90°.

Cause (and remedy)

• Ensure the AC power adapter is connected.

• The unit is not turned on.

• Make sure the infrared remote sensor is not blocked.

• Make sure the plastic sheet has been removed from the remote control.

• Point the remote directly at the infrared remote sensor on the unit.

• Replace the battery in the remote control with a new one.

• The volume control is located on the side of the unit – please try adjusting this.

• The system is in pause mode. Press the

button to return to normal play mode.

• The unit is in fast-forward or fast-reverse mode. Press the

button to return to

normal play mode.

• Make sure the AUDIO/VIDEO output connections are correct.

• The DTS DVD cannot be decoded to have speaker output.

• The unit is too hot; shut off the unit for 30 minutes to cool it down.

• The region number of the disc doesn't match the region

number of this unit.

• Clean the disc.

• The disc is scratched.

• Adjust the LCD's brightness and contrast using the

button on the remote control.

• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

• Clean the disc.

• There is no disc inside ("No Disc" appears on the screen).

• Insert the disc correctly with the playback side facing down.

• Clean the disc.

• A non-NTSC disc has been inserted. The unit and disc region number are incompatible.

• Condensation may have formed inside the unit due to a sudden change in temperature.

Wait about an hour for it to clear and try again.

Need More Help?

Please visit online help at http://www.RCAav.com

811-837291W 5

RCA DRC6307E User Manual page 2

Related Manuals for RCA DRC6307E