Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Electrolux EW6TN4062H
Summary of Contents for Electrolux EW6TN4062H
- Page 1 EN User Manual | Washing Machine EW6TN4062H...
-
Page 2: Table Of Contents
Welcome to Electrolux! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.electrolux.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. PRODUCT DESCRIPTION................6 4. TECHNICAL DATA..................7 5. -
Page 3: General Safety
the use of the appliance in a safe way and understand the hazards involved. • Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. •... -
Page 4: Safety Instructions
• The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. • Old hose sets must not be reused. • If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. -
Page 5: Water Connection
electrical ratings of the mains power • Do not put flammable products or items supply. that are wet with flammable products in, • Do not use multi-plug adapters and near or on the appliance. extension cables. • Do not wash fabrics which are heavily •... -
Page 6: Product Description
2.6 Disposal • Remove the door catch to prevent children or pets from becoming trapped in the drum. WARNING! • Dispose of the appliance in accordance Risk of injury or suffocation. with local requirements for the disposal of Waste Electrical and Electronic Equipment •... -
Page 7: Technical Data
6 kg Spin Speed Maximum spin speed 951 rpm Only for Hungarian market Electrolux Lehel Kft Name of the distributor 1142 Budapest Erzsébet kir.né útja 87 Connect the water inlet hose to a water tap with a 3/4'' thread. 5. INSTALLATION WARNING! Refer to Safety chapters. -
Page 8: Unpacking And Positioning
5.1 Unpacking and positioning Adjust the appliance correctly to prevent vibration, noise and movement of the appliance when it operates. WARNING! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. Make sure that carpets do not stop the air circulation below the appliance. Make sure that the appliance does not touch the wall or other units. -
Page 9: The Inlet Hose
5.2 The inlet hose Accessories delivered with the appliance may 0.3-10 bar vary depending on the model. 1/2” 3/4” 3/4” 3/4” Make sure there is no damage to hoses and there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. -
Page 10: Control Panel
5.4 Electrical connection The power supply cable must be easily accessible after installing the appliance. At the end of installation you can connect the For any electrical work required to install this mains plug to the mains socket. appliance, contact our Authorised Service The rating plate and the 'Technical Data' Centre. - Page 11 Centrifuga reduction options touch button Be/Ki push button Hőmérséklet touch button • No Spin option • Rinse Hold option • Éjszakai option 6.2 Display Lid locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. •...
-
Page 12: Dial And Buttons
7. DIAL AND BUTTONS 7.1 Introduction more water for some washing programmes • Rinse Hold . The related indicator comes on. The options/functions are not available The final spin is not performed. The water with all washing programmes. Check the of the last rinse is not drained out to compatibility between options/functions prevent the fabrics from creasing. -
Page 13: Time Manager
7.9 Time Manager With this option you can reduce the These options can increase the programme duration depending on the load programme duration. size and the degree of soiling. When you set a washing programme, the 7.6 Permanent Extra öblítés display shows the default duration and With this option you can add a few rinses dashes. -
Page 14: Programmes
8. PROGRAMMES 8.1 Programme Chart Programme Reference Maxi‐ Programme description Default temper‐ spin speed (Type of load and level of soiling) ature Spin speed load Temperature range range [rpm ] Eco 40-60 1000 rpm 6 kg White cotton and fast-coloured cotton. Normally soiled (1000- 400) items. - Page 15 Programme Reference Maxi‐ Programme description Default temper‐ spin speed (Type of load and level of soiling) ature Spin speed load Temperature range range [rpm ] Gyapjú 1000 rpm 1 kg Machine washable wool, hand washable wool and other (1000- 400) fabrics with «hand washing»...
-
Page 16: Programme Options Compatibility
Programme Reference Maxi‐ Programme description Default temper‐ spin speed (Type of load and level of soiling) ature Spin speed load Temperature range range [rpm ] Farmer 800 rpm 2 kg Special programme for Denim clothing with delicate 30 °C (1000 - 400) washing phase to minimize colour fading and marks. - Page 17 Programme Sport ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Outdoor Farmer ■ ■ ■ ■ ■ ■ ■ Suitable detergents for washing programmes Universal pow‐ Liquid Uni‐ Liquid for Delicates Programme Special der 1) versal coloureds woollens Eco 40-60 ▲...
-
Page 18: Settings
8.2 Woolmark Wool Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool gar‐ ments labelled as «hand wash» provided that the prod‐ ucts are washed according to the instructions on the gar‐ ment label and those issued by the manufacturer of this washing machine. -
Page 19: Factory Reset
3. Press and hold the Centrifuga and Hőmérséklet buttons for some seconds (within 10 seconds after the switching on. If the procedure does not work (due to After these 10 seconds, the key timeout, wrong programme dial position combination activates and deactivates the or wrong keys combination), switch the acoustic signals). - Page 20 4. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the When using liquid detergents add them drum. into a dosing ball (supplied by the 5. Close the drum and the lid. detergent's manufacturer).
-
Page 21: Liquid Or Powder Detergent
11.4 Liquid or powder detergent CLICK CLICK • Position A for powder detergent (factory setting). If a selection is not possible an acoustic • Position B for liquid detergent. signal sounds and the display shows When you use the liquid detergent: •... -
Page 22: The Sensicare System Load Detection
2. Touch the Start/Szünet button. The appliance lid locks and starts the countdown The SensiCare System is not available of the delay start. The display shows the with all programmes such as :Gyapjú, indicator Öblítés, Centrifuga and programmes with When the countdown is completed, the short cycles. -
Page 23: End Of The Programme
11.11 Opening the lid - Adding 11.13 Draining water out after end garments of cycle If you have chosen a programme or an option that does not empty out the water of the last rinse, the programme is completed, but: If the temperature and level of the water in the drum are too high and/or the drum •... -
Page 24: Hints And Tips
If you set a programme or an option that ends with water in the drum, the Stand- by function doesn't deactivate the appliance to remind you to drain the water. 12. HINTS AND TIPS -manually redistribute the load so that the WARNING! items are spaced evenly around the tub;... -
Page 25: Water Hardness
powder detergents containing bleach • Normally soiled laundry may be washed for whites and laundry sanitization, without prewash in order to save – liquid detergents, preferably for low detergent, water and time (the temperature wash programmes (60 °C environment is protected too!). max) for all types of fabric, or special •... -
Page 26: Removing Foreign Objects
13.4 Descaling Indicative periodic cleaning schedule: Descaling Twice a year Maintenance wash Once a month If the water hardness in your area is high Clean lid seal Every two months or moderate, we recommend that you use a water descaling product for Clean drum Every two months washing machines. -
Page 27: Cleaning The Detergent Dispenser
13.7 Lid seal 1. Remove all laundry from the drum. 2. Run a Pamut programme with the highest Regularly examine the seal and remove all temperature. objects from the inner part. Clean it when 3. Add a small quantity of powder detergent needed, using ammonia cream cleanser into the empty drum, in order to rinse out agent without scratching the seal surface. -
Page 28: Emergency Drain
Always keep a rag nearby to dry up any WARNING! water spillages when removing the filter. • Disconnect the mains plug from the mains socket. • Do not clean the pump if the water in the appliance is hot. Wait until the water cools down . -
Page 29: Troubleshooting
14. TROUBLESHOOTING WARNING! Refer to Safety chapters. 14.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the Start/ Szünet button may flash continuously:... - Page 30 • Wait until mains supply is stable. The mains supply is unsta‐ ble. • Disconnect the appliance and close the water tap. Contact the Authorised Service Centre. The anti-flood device is on. If the display shows other alarm codes, deactivate and activate the appliance.
-
Page 31: Consumption Values
Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before you wash the laun‐ The washing results are not dry. satisfactory. • Make sure that you set the correct temperature. •... - Page 32 Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme. 15.3 According to Commission Regulation Eu 2019/2023 Eco 40-60 pro‐...
-
Page 33: Quick Guide
Programme rpm 1) Litres hh:mm °C Gyapjú 0.20 35.0 1:10 32.00 1000 30°C Reference indicator of the spin speed. Suitable for washing heavily soiled textiles. Suitable for washing lightly soiled cottons, synthetic and mixed fabrics. It also performs as quick washing cycle for lightly soiled laundry. 16. -
Page 34: Environmental Concerns
16.3 Programmes Programmes Load Product description Eco 40-60 6 kg White and coloured cottons. Normally soiled garments. Pamut 6 kg White cotton and coloured cotton. Műszál 3 kg Synthetic items or mixed fabric items. Kímélő 2 kg Delicate fabrics such as acrylics, viscose, polyester items. Gyors 14 perc 1,5 kg Cotton and synthetic lightly soiled items or once worn items. - Page 36 135997021-A-422023...
Need help?
Do you have a question about the EW6TN4062H and is the answer not in the manual?
Questions and answers