Download Print this page

Zanussi FJS 904 CV Instruction Booklet page 6

Advertisement

USE
Control panel
1
Detergent dispenser drawer
Symbols
W Prewash
W Wash
& Fabric softener
There is a brief guide to the washing programmes on
the drawer itself.
2 «Spin reduction» button 1©
By depressing this button the final spin speed on cot-
ton and linen programmes is reduced from 850 to
650 rpm and. on gentle programmes and programme
«L» from 650 to 450 rpm.
3 Anti-crease button (J
Press this button to. make the machine stop with water
in the drum after the synthetic or delicate wash cycles.
This prevents any creasing which may take place if
the clothes are left damp in the drum. When it is con-
venient for you to empty the machine, simply press
this button again so that the machine can proceed to
drain and short spin, or turn the dial to the drain pro-
gramme (K).
If this button is not activated, the washing pro-
grammes will end with a short spin.
4 Quick wash button (74
This button is for programmes A (cotton) and D (syn-
thetics). It reduces the duration of these wash cycles.
This button is particularly suitable for quick washing of
lightly soiled fabrics.
5 On/Off button bo
Press this button to start the machine: the «mains-on»
light will come on. The same button is used to switch
the machine off.
Before selecting a programme or changing an on-
going programme the machine must be switched off
by depressing the On/Off button 4.
6 Temperature selector dial (thermostat) ©
To select the washing temperature turn the dial to the
required value.
When your laundry is only lightly soiled, a cold wash
can be used (dial to position *).
7 Mains-on light
{t comes on when the machine starts working.
8 Programme selector dial
To select the required washing programme turn the
dial clockwise.

Advertisement

loading
Need help?

Need help?

Do you have a question about the FJS 904 CV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel