Zanussi FJS 904 CV Instruction Booklet page 12

Operating sequence
1. Place the laundry in the drum.
Open the loading door by
pulling the catch out-
wards. Place the gar-
ments to be washed in-
side the drum one by one
laying them as flat as
possible. Close the door
ensuring that the catch
clicks into place.
2. Measure out the detergent into the dis-
penser drawer.
Pull out the detergent
dispenser drawer from
the control panel.
Pour the detergent into
the main wash compart-
ment.
Follow the detergent
manufacturer's guide-
lines for the amount
required.
If you wish to carry out an extra prewash, pour the
amount of detergent required into the «prewash»
compartment.
3. Add the fabric softener if required.
Pour the softener, if
required, into the .com-
partment marked 8.
Do not exceed the MAX
level.
4. Press the button(s) required
5. Select the temperature
5 Turn the dial to the re-
quired temperature.
12
6. Select the required programme
Turn the dial clockwise
until the programme
coincides exactly with
the marker.
7. Start the machine
Plug into the mains.
Tur on the water tap.
Check that the drain hose is correctly positioned.
DI Press the ON/OFF but-
Bo ton, the mains on light
will illuminate and the
machine starts operating.
Posi4
8. At the end of the programme
The appliance stops automatically.
If a programme without draining of water has been
selected, drain the water before opening the door.
Wait one or two minutes before opening the door
to give the electric locking mechanism time to release
it.
Release the ON/OFF button, the mains-on light goes
out
Release the button(s).
Turn the water tap off and unplug the machine from
the mains.
Open the loading door and remove the laundry.
Ensure that the drum is completely empty by turning it
with one hand.
Leave the door ajar for a while to eliminate the steam.