Infinity CC-1 Owner's Manual page 4

CENTERPLACEMENT...
REAR PLACEMENT...
Figure 2. Each CC-1 center-channel
speaker includes threaded inserts for
use with an optional OmniMount
System Model #25-STMP Mounting
Bracket. Follow the instructions
packed with the OmniMount product
to correctly install each assembly and
make sure only wall studs or ceiling
joists are used as mounting locations.
PIACEMENT
The CC-I center-channel speaker isdesigned f or easyhorizontal
placementon topof(or on a shelf below) a television. Itcomeswith
bnilt-in feet toprotect f urniture. Simplyposition thespeaker sothe
•front f_iUe) isevenwiththeTV screen.
For surroundleft a nd right channels, place a CC-I speaker ontheleft
and anotheron theright, horizontally on bookshelves orstands, above
and behindthelistening area.
For wallorceRing installations, use a pair ofOmniMount Systems
Mounting Brackets (Model#25-ST-MP)and attach them viaconvenient
threadedinserts o ntheback ofeachcabinet, asshown inFigure 2.In
this case, you canmount CC-1 speakers horizontally orvertically.
NOTE: See your local audio / vidco retailer or contact OmniMount Systems
directly at 602-829-8000 to obtain mounting brackets.
CC4
(marvlew)
Usescrews _ "'.,
supplied with """[ '
s • !
CC-1 - "'. _'
OmniM
Model#25-ST-MP
(seeOmniMount [ns.truct[ons)
Infinity CC-1 Center-Channel Speaker OwneZs Manual *3