Advertisement
Checks & Installation Attention
Step 1: Check the appearance of the battery.
Step 2: Check the battery voltage.
Methods:
•
Turn on battery, press and hold the panel button for 4S. Release the button once the indicators
light up.
•
Measure the voltage at the terminal interface with a voltmeter. Make sure the pack voltage not
lower than 49V, and the voltage difference between packs less than 1V.
•
The voltage of the battery pack can also be read by the App.
Note:
If the voltage difference between battery packs is over 1V, charge the lower battery until its
voltage matches the higher battery.
As long as the battery can be turned on and the inverter is in automatic charging mode, with
voltage and current, the battery will automatically start charging. If there's no inverter, can also use
DC charger.
Voltmeter
DC Charger
2000W/600V
8
Advertisement
Need help?
Do you have a question about the RT5427 and is the answer not in the manual?
Questions and answers