Speaker Settings; Digital Output - Panasonic SC-XH70 Owner's Manual

Time Delay
When connected with a Plasma display, adjust if you notice the audio is
out of sync with the video.
≥ 0ms/Auto ≥ 20ms
≥ 80ms ≥ 100ms
When using VIERA Link "HDAVI Control" with "HDAVI Control 3 or later"
compatible TV ( 14), select "0ms/Auto".
Audio and video will automatically be set in sync.
Video Resolution
This works only when the HDMI connection is being used.
Select suitable picture quality for your TV.
(Video recordings will be converted to, and output as, high-definition
video.)
≥ Auto ≥ 480i
≥ 1080i ≥ 1080p
Ensure that your TV can support the resolution that you choose.
If a message screen appears, confirm your selection by pressing
[2, 1]8 to select "Yes" and press [OK]8. If the picture is distorted, wait
for 15 seconds or press [2, 1]8 to select "No". To accept the setting,
select "Yes" again.
HD JPEG Mode
[JPEG]
(This works only when using HDMI connection with "Video Resolution"
( above) set to "Auto", "720p", "1080i" or "1080p".)
≥ On: HD JPEG playback is available. (JPEG images will be displayed
in original resolution.)
≥ Off
During HD JPEG playback, there will be no on-screen menus (
on-screen displays.
Black Level
(This works only for video output from the VIDEO OUT terminal.)
Change the black level of the picture.
≥ Lighter
≥ Darker
Audio menu
Select to suit the type of equipment you connected to the HDMI AV OUT
terminal.
Select "Bitstream" when the equipment can decode the bitstream (digital
form of 5.1-channel data). Otherwise, select "PCM".
(If the bitstream is output to the equipment without a decoder, high levels
of noise can be output and may damage your speakers and hearing.)

Digital Output

≥ Bitstream ≥ PCM
When audio output is from HDMI AV OUT terminal, and the connected
equipment does not support the item selected, the actual output will
depend on the performance of this connected equipment.
Dynamic Range
≥ On: Adjusts for clarity even when the volume is low. Convenient for
late night viewing. (Only works with Dolby Digital)
≥ Off: The full dynamic range of the signal is reproduced.
16
≥ 40ms ≥ 60ms
≥ 480p ≥ 720p
13) and

Speaker Settings

Select the delay time of the speakers.
(Effective only when "Surround layout (Recommended)" mode is selected
in "Speaker layout" ( 8, Easy setup).)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, except for
the subwoofer, should be the same distance from the seating position.
If you have to place the center or surround speakers closer to the seating
position, adjust the delay time to make up for the difference.
:
C
C
L R
:
SW
LS RS Approximate room dimensions
LS
RS
Circle of constant primary listening distance
If either distance a or b is less than c, find the difference in the table
and change to the recommended setting.
a Center speaker
Difference (Approx.) Setting
30 cm (1 foot) 1ms
60 cm (2 feet) 2ms
90 cm (3 feet) 3ms
120 cm (4 feet) 4ms
150 cm (5 feet) 5ms
≥ C Delay (Center Delay):
0ms, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker.
≥ LS/RS Delay (Left Surround/Right Surround Delay):
0ms, 5ms, 10ms, 15ms
Select the delay time for your surround speakers.
≥ Test Tone:
Use the test tone to listen to the speaker output to confirm speaker
connections.
Test tone will be output to each channel in the following order.
Left, Center, Right, Surround Right, Surround Left, Subwoofer
To stop the test tone, press [RETURN]D.
HDMI menu
VIERA Link
≥ On: The VIERA Link "HDAVI Control" function is available (
≥ Off
Audio Out
≥ On: When audio output is from the HDMI AV OUT terminal.
(Depending on the capabilities of the connected equipment,
audio output may differ from the audio settings of the main unit.)
≥ Off: When audio output is not from the HDMI AV OUT terminal. (The
audio is output using the settings of the main unit.)
Power Off Link
Select the desired power off link setting of this unit for VIERA Link operation
( 14). (This works depending on the settings of the connected VIERA Link
"HDAVI Control" compatible equipment.)
≥ Video/Audio: When the TV is turned off, this unit will turn off
automatically.
≥ Video: When the TV is turned off, this unit will turn off except during the
following conditions:
– audio playback ([CD] [MP3])
– radio mode
– "AUX", "ARC" or "D-IN" mode (non-selected TV audio setting
for VIERA Link)
– "MUSIC P." mode
TV Audio
Select the TV audio input to work with the VIERA Link operations (
≥ AUX
≥ ARC
≥ DIGITAL IN
Actual speaker position
Ideal speaker position
:
Primary listening
distance
b Surround speaker
Difference (Approx.)
150 cm (5 feet)
300 cm (10 feet)
450 cm (15 feet)
Setting
5ms
10ms
15ms
14).
14).