18. ENVIRONMENTAL CONCERNS..............40 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
This appliance is designed for single household • domestic use in an indoor environment. This appliance may be used in, offices, hotel guest • rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
ENGLISH the drum to prevent an internal • Make sure not to cause damage to damage. the mains plug and to the mains • Always take care when moving the cable. Should the mains cable need to appliance as it is heavy. Always use be replaced, this must be carried out safety gloves and enclosed footwear.
• Do not put flammable products or including heat pumps, piping and items that are wet with flammable related equipment including hoses, products in, near or on the appliance. valves, filters and aquastops, printed • Do not wash fabrics which are heavily...
ENGLISH 3.2 Appliance overview Worktop Drain hose Detergent dispenser Inlet hose connection Control panel Mains cable Door handle Transit bolts Rating plate Hose support Drain pump filter Feet for levelling the appliance The rating plate reports the model name (A) , product number (B), electrical ratings (C) and serial number (D).
Level of protection against ingress of solid particles IPX4 and moisture ensured by the protective cover, ex‐ cept where the low voltage equipment has no pro‐ tection against moisture Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 10 bar (1.0 MPa)
ENGLISH 6. Put the appliance back into an 8. Put the plastic caps, that you find in upright position. Remove the power the user manual bag, in the holes. supply cable and the drain hose from the hose holder. We recommend that you keep the packaging and the transit bolts for any transport of the appliance.
1. Install the appliance on a flat hard floor. The appliance must be levelled and stable. Make sure that the appliance does not touch the wall or other units and there is air circulation below the appliance. 2. Loosen or tighten the feet to adjust the level.
Page 11
ENGLISH 2. On the edge of a sink - Fasten the The end of the drain guide to the water tap or to the wall. hose must always be ventilated , i.e. the inner diameter of the drain pipe (min. 38 mm - min. 1.5") must be larger than the external diameter of the drain hose.
If you install the appliance on a plinth authorised dealer that is not an accessory supplied by AEG, secure the appliance in the fixing Read carefully the instructions supplied plates. with the accessory. Read carefully the instructions supplied Only appropriate with the accessory.
Soft Plus option is activated. Spin and drain phase indicator. It flashes during spin and drain phase. Child safety lock indicator. Time saving indicator. Temperature indicator. The indicator appears when a cold wash is set.
Page 15
ENGLISH turns regularly to reduce creasing. Before setting this option, You must drain the water to unlock select a suitable washing the door. programme for the If you touch the Start/Pause button, garments. The appliance the appliance performs the spinning will performs the most phase and drains the water.
8.6 Soft Plus The corresponding indicator above the touch button illuminates. Set the Soft Plus option to ensures perfect distribution of the fabric softener 8.9 Time Save and improves the fabric softness. With this option you can decrease the This option increases slightly programme duration.
Page 17
ENGLISH Programme Programme description Eco 40-60 White cotton and fast-coloured cotton. Normally soiled items. The energy consumption decreases and the time of the washing programme is extended, ensuring good washing re‐ sults. White cotton and coloured cotton. Normally, heavily and lightly soiled items.
Page 18
Programme Programme description Denim clothing and jersey items. Normal soil. This pro‐ gramme performs a gentle rinsing phase, designed for denim, Denim that reduces fading and does not cause washing powder resi‐ dues on the fibres. 1) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't rotate or doesn't rotate properly, but this is normal for this programme.
Page 19
ENGLISH Programme Default tempera‐ Reference spin Maximum load ture speed Temperature Spin speed range range 30 °C 800 rpm 1,5 kg 40 °C - Cold 1200 rpm - 400 rpm Denim 1) According to Commission Regulation EU 2019/2023, this programme at 40 °C is able to clean normal‐ ly soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle.
Page 20
■ ■ ■ ■ Time Save ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Delay Start ■ ■ ■ ■ ■ Soft Plus 1) Before setting this option, select a suitable washing programme for the garments. The appliance will performs the most fitting spin cycle for your garments care (e.g.
ENGLISH 9.2 Woolmark Wool Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labelled as «hand wash» provided that the products are washed according to the instructions on the garment label and those issued by the manu‐...
10.6 Factory Reset start time). To visualise this value, proceed as follows: This function allows to restore the factory 1. Switch the appliance on by pressing default options. To activate this option On/Off button. follow steps below: 2. Turn the programme knob to the Eco 1.
ENGLISH 3. Put the laundry in the drum, one item CAUTION! at a time. Use only specified Make sure not to put too much laundry in detergents for washing the drum. machine. 4. Close the door firmly. Always obey the instructions that you find on the packaging of the detergent products.
12.5 Setting a programme 1. Turn the programme dial to select the desired washing programme. The related programme indicator comes The indicator of the Start/Pause button flashes. The display shows the maximum declared load for the programme, the default temperature, the default spin...
ENGLISH The PROSENSE adapts The ProSense detection is starts at the end of the carried out with complete countdown. washing programmes only Cancelling the delay start (no skipping phase selected). after the countdown has started 12.9 Programme phase To cancel the delay start: indicators 1.
After five minutes from the end of the If the SensiCare phase is programme, the energy saving function already carried out and the automatically deactivates the appliance. water filling is already started, the new programme When you activate the...
ENGLISH • After 5 minutes from the end of the In any case, the appliance washing programme empties the water out Press the On/Off button to activate automatically after the appliance again. approximately 18 hours. The display shows the end of the last set programme.
Special stain removers are available. • the wash load to turn grey, Use the special stain remover that is • greasy clothes, applicable to the type of stain and fabric. • mould in the appliance. Excessive detergent may cause: 13.3 Detergent type and...
ENGLISH 14.1 Periodic cleaning CAUTION! schedule Do not clean the metal surfaces with chlorine-based Periodic cleaning helps to extend the detergent. life of your appliance. After each cycle, keep the door and the 14.4 Descaling detergent dispenser slightly ajar to get air circulation and dry the humidity inside If the water hardness in your the appliance: this will prevent mildew...
14.8 Cleaning the detergent dispenser To prevent possible deposits of dried detergent or clotted fabric softener and/or formation of mould in the detergent dispenser drawer, once in a while carry out the following cleaning procedure: 1. Open the drawer. Press the catch...
ENGLISH 4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum. 14.9 Cleaning the drain pump Regularly check the drain pump filter and make sure that it is clean. Clean the drain pump if: •...
Page 32
WARNING! Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages.
ENGLISH When you drain the water with the emergency drain procedure, you must activate the drain system again: 1. Put 2 litres of water in the main wash compartment of the detergent dispenser. 2. Start the programme to drain the water. 14.10 Cleaning the inlet hose 4.
WARNING! Make sure that the temperature is higher than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. 15. TROUBLESHOOTING WARNING! Refer to Safety chapters. 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation.
Page 35
ENGLISH • Make sure that the door is properly closed. The appliance door is open or not closed correctly. • The programme was not finished properly or the appliance stopped too early. Switch the appliance off and on again. Internal fail. No com‐ •...
Problem Possible solution • Make sure that a washing programme that ends with water in tub, has not been selected. • Make sure that the washing programme is finished. You cannot open the • Set the drain or the spin programme if there is water in the appliance door.
Page 37
ENGLISH The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
ENGLISH 2. Set the desired options by means of At the end of the programme, remove the the corresponding touch buttons. laundry. 3. To start the programme, touch the Start/Pause button. 17.2 Cleaning the drain pump filter Clean the filter regularly and, especially, if the alarm code appears on the display.
18. ENVIRONMENTAL CONCERNS appliances marked with the symbol Recycle materials with the symbol with the household waste. Return the Put the packaging in relevant containers product to your local recycling facility or to recycle it. Help protect the contact your municipal office.
Need help?
Do you have a question about the L6SNE26C and is the answer not in the manual?
Questions and answers