Advertisement
Table of Contents
Contents
AIRPULSE ST200 Manual
Parts list
Assembly
- Using alignment plate for positioning, place rubber gasket on bottom plate and adhere firmly.
- Use Allen key and the 6x 50mm wood screws to lock the bottom and top plates onto the pillar.
Secure the unit on stand
- Carefully remove the rubber feet on speaker. Use a screw driver to remove the metal feet.
Please keep the metal feet and screws in a safe place for future use.
![Securing the unit on stand - Step 1]( "AIRPULSE - ST200 - Securing the unit on stand - Step 1")
- Place speaker on stand, making sure the holes on bottom of speaker align with the 4 holes on the top plate.
Use the M6x30mm machined screws to lock the speaker securely onto the stand.
![Securing the unit on stand - Step 2]( "AIRPULSE - ST200 - Securing the unit on stand - Step 2")
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the ST200 and is the answer not in the manual?
Questions and answers