Intel Vision HT User Manual page 14

the floppy disk in the floppy drive until the system reboots. Windows setup
will need to copy the files again from the floppy to the Windows installation
folders. Once Windows setup has copied these files again, remove the floppy
disk so that Windows setup can reboot as needed.
7. During Windows setup, create a partition and file system on the RAID
volume as you would on any physical disk.
If you wish to use the Intel Rapid Storage Technology user interface in
Windows, you will need to install Intel Rapid Storage Technology by
Note
running the Setup.exe process after these steps have been completed and
the operating system has been successfully installed.
14