Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hammar HM-0600
Summary of Contents for Hammar HM-0600
- Page 1 INSTALLATION MANUAL LIFEBUOY RELEASE SYSTEM Mk II for electric/water release...
-
Page 2: Installation
INSTALLATION Mount the GRP holder in a position so that a released lifebuoy will easily fall into the water. Follow the instructions for the mounting bolts in accordance with the pictures. Make sure that you mount double washers between frame or bulkhead and the GRP holder. Mount the connector box close to the GRP holder. - Page 3 Make sure that the lifebuoy line is not on the outward side of the release cord! This might entangle the lifebuoy in an activation situation. Pull up the release cord through the ERU hole with the pilot line. Secure it with the manual safety pin. 10.
- Page 4 TEST OF THE LIFEBUOY RELEASE SYSTEM TESTING THE MECHANICAL RELEASE FUNCTION Secure the Lifebuoy to avoid accidental release. Remove the manual safety pin holding the release cord. The Lifebuoy will be released and launched from the GRP holder. TESTING THE ELECTRONIC RELEASE FUNCTION BY USING THE EMULATOR HM-0467 Open the enclosure of the Emulator and attach two connection wires to the terminals on the Emulator.
-
Page 5: Complete System
Longer lengths can be supplied on request by additional meter price. Maximum length of the installation is 150m. The Hammar products are designed to handle any voltage drop, so there is no need to increase the cable dimensions more than our recommendation. -
Page 6: Available Options
20m cable Safety pin 1pcs Pilot line 1pcs Installation manual 1pcs HM-0551 1pcsFlush mount release button Also available inLifebuoy release system portfolio: Manual release only - HM-0610 Vacuum operated system - HM-0650 ATEX approved products, please contact Hammar for further information. -
Page 7: Spare Parts
SPAREPARTS Part no. HM-0620 Lifebuoy metal spring holder only. HM-0630 Replacement kit for Lifebuoy System MkII, ERU electric/ water activation - HM-0600 with release cord and instal- lation manual in English. - Page 8 GRP HOLDER DRAWING 2023-05-11 General tolerance: Metallic materials - ISO 2768-f Sharp edges to be broken Date: (yyyy-mm-dd) ViAr ViAr FrJa Surface Finish: Drawn Checked Approved Scale Sheet Material Description Draw.No. Lifebuoy Holder (shell) CD000004 Sheet1 Rev.: Tel.: +46 31 709 65 50 Sideview Backview Frontview...
- Page 9 CONNECTOR BOX DRAWING...
- Page 10 RELEASE SWITCH BOX DRAWING...
Need help?
Do you have a question about the HM-0600 and is the answer not in the manual?
Questions and answers