Page 1
TECHNICAL PRODUCT INFORMATION HR-0500 EASY RELEASE...
Page 2
The Hammar Easy Release, HR-0500 is always used together with the Hammar H20 hydrostatic release. Should the vessel sink and the liferaft is not released manually the Hammar H20, which is activated by increasing water pressure, will automatically release the liferaft.
Page 3
INSTALLATION Before installation; • Connect the H20 strong rope to a strongpoint on the deck or liferaft cradle with a shackle. • Connect the liferaft lashing to the easy release wire loop and adjust so the lever will reach the strong rope. Liferaft lashing Strong rope Painter line...
Need help?
Do you have a question about the HR-0500 and is the answer not in the manual?
Questions and answers