Specifications; Integrated Amplifier; Power Amplifier - Kenwood Spectrum 1050 AV User Manual

Specifications
Integrated amplifier
(KA-996)
Power amp section
Power output in stereo operation:
100 watts per channel minimum
RMS, both channels dnven, at 8
ohms, from 40 Hz to 20 kHz, with
no more than 0.09% total harmonic
distortion (FTC)
Power output in surround operation:
Left and right channels: 100 watts
per channel, I kHz, 0.9%THD, 8 ohms
Sumound channel: 20 watts + 20
watts. I kHz, 0,9 % THD, 8 ohms
Pre amp section
Frequency response:
Line (CD, Tape, Video): 20 Hz to
60 kHz. +0 dB. -3 dB
Phono: (RIAA): 20 Hz to 20 kHz
+0.5 dB
Signal-to-noise ratio (IHF '66):
Phono: 75 dB
CD, Tape, Video: 95 dB
Maximum input level (Phono):
I
20 mV. 0.5 % THD at
I
kHz
Input sensitivity/impedance:
Phono: 3.5 mV/47 k-ohms
CD, Tape, Video: 200 mV/47 k-ohms
Adaptor loop input:
200 mV/47 k-ohms
Tone controls:
Bass: +10 dB at 100 Hz
Treble: +10 dB at 10 kHz
Loudness control (volume at -30 dB):
+8 dB at 100 HZ
General
Power consumption: 2.3 amps
Electrical outlet (2 switched):
400 watts max total
Dimensions:
Width: 17-5/16"
Height: 5-5/8"
Depth: I 1-13/16"
Weight (net): 20,5 lbs
Power amplifier
(KM-996)
Performance
Power output:
100 watts per channel minimum
RMS, both channels driven, at 8
ohms,
I
kHz, with no more than
0.09 % total harmonic distortion
Frequency response:
10 Hz to 65 kHz +0 dB, -3 dB
Signal-to-noise ratio (I HF '66):
>103 dB
Input sensitivity/impedance:
150 mV/40 k-ohms
General
Power consumption: 2.3 amps
electrical outlet (I unswitched):
30 watts max
Dimensions:
Width: 17-5/16"
Height: 5-1/4"
Depth: 10-3/8"
Weight (net): 14,1 lbs
Output level/impedance:
Tape record: 200 mV/1 k-ohm
Adaptor loop out: 200 mV/1 k-ohm