Specifications; Receiver (Kr-897); Power Amplifier (Km-897) - Kenwood Spectrum 860 AV User Manual

Specifications
Receiver (KR-897)
Power amp section
Power output in stereo operation
120 watts per channel minimum
RMS, both channels driven at 8
ohms, from 40 Hz to 20 kHz, with
no more than 0.08% total harmonic
distortion (FTC)
Power output in surround opera-
tion: Left and Right channels: | 20
watts per channel, | kHz. 0.8%
THD, 8 ohms.
Pre amp section
Signal-to-noise ratio (IHF-A)
Phono: 75 dB
CD, Tape. Video: 93 dB
Input sensitivity/impedance
Phono: 3.0 mV/47 k-ohms
CD, Tape, Video: 220 mV/47 k-ohms
Output level/lmpedance
Tape Rec: 220 mV/22 k-ohms
Subwoofer 2 V/600 ohms
Tone controls
Bass: +10 dB at 100 Hz
Middle: £10 dB at 900 Hz
Treble: +10 dB at 10 KHz
NB: + 5 dB at 80 Hz
"FM tuner section
Tuning frequency range:
87.5 MHz ~ 108 MHz
Useable sensitivity (IHF):
13.2 dBf (1.3 LV at 75 ohms)
50 dB quieting sensitivity (stereo):
41.2 dBF (31.6 WV at 75 ohms)
Total harmonic distortion (1 kHz)
Stereo: 0.6%
Mono: 0.5%
Signal-to-noise ratio at 65 dBf (IHF)
Stereo: 68 dB
Mono: 75 dB
Selectivity (IHF +400 kHz): 66 dB
Stereo separation at | kHz (IHF):
40 dB
Frequency response:
30 Hz ~ 15 kHz, +0.5 dB, -3.0 dB
AM tuner section
Tuning frequency range:
530 ~ 1700 kHz
Usable sensitivity:
15 V/(500 Vim)
Total harmonic distortion: 0.6%
Signal-to-noise ratio: 48 dB
Selectivity: 30 dB
General
Power consumption: }60 WATTS
AC outlet (| switched): 300 W
2.5 A max. total
Dimensions
Width: |7-5/16"
Height: 5" :
Depth: 15-5/16"
Weight (net): 19.9 Ib
Power amplifier
(KM-897)
Performance
Power output:
100 watts per channel minimum
RMS, both channels driven, at 8
ohms, | kHz, with no more than
0.09 % total harmonic distortion
Frequency response:
10 Hz to 65 kHz +0 dB, -3 dB
Signal-to-noise ratio (! HF "66):
>103 dB
Input sensitivity/impedance:
150 mV/40 k-ohms
General
Power consumption: 2.3 amps
AC outlet (2 unswitched):
50 watts max
Dimensions:
Width: 17-5/16"
Height: 5-1/4"
Depth: | 0-3/8"
Weight (net): 14.1 Ibs