Integrated Peripherals - Acer Veriton X4620G Service Manual

Integrated Peripherals

Parameter
Onboard SATA Controller
Onboard SATA Mode
Onboard USB Controller
Legacy USB Support
USB Storage Emulation
Onboard Graphics
Controller
Onboard Audio Controller
Onboard LAN Controller
Onboard LAN Option ROM
Serial Port1 Address
Serial Port2 Address
Parallel Port Address
Chapter 2
Description
Enables or disables the onboard SATA controller.
Select an operating mode for the onboard SATA.
Enables or disables the onboard USB controller.
Enables or disables support for legacy USB devices.
If Auto, USB device equal or less than 2GB will be emulated as Floppy
and remaining as harddrive. Forced FDD option can be used to force a
HDD formatted drive to boot as FDD (Ex.ZIP drive).
This item allows you to enable or disable the onboard controller.
Enables or disables the onboard audio controller.
Enables or disables the onboard LAN controller.
Enables or disables the load of embedded option ROM for onboard
network controller.
Use this item to enable or disable the onboard COM1 serial port, and to
assign a portaddress.
Use this item to enable or disable the onboard parallel port, and to
assign a portaddress.
Use this item to enable or disable the onboard COM2 serial port, and to
assign a portaddress.
Option
Enabled
Disabled
Native IDE
RAID
AHCI
Enabled
Disabled
Enabled
Disabled
Auto
Floppy
Hard Disk
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Disabled
3F8/IRQ4
3E8/IRQ4
Disabled
2F8/IRQ3
2E8/IRQ3
Disabled
378
278
3BC
19