Jumper Setting
The section explains how to set jumper for correct configuration of the mainboard.
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled.
Jumper Settings
Jumper
CLR_CMOS
ME_DISABLE
BIOS_WP
Chapter 5
Type
Description
Clear CMOS
3-pin
3-pin
Disable ME
3-pin
BIOS Flash
protect
Setting (default)
1-2: NORMAL
2-3: CLEAR
Before clearing the CMOS, make
sure to turn the system off.
1-2: NORMAL
2-3: ME disable
1-2: BIOS_WP
2-3: NORMAL
CLR_CMOS
106