Magnavox MBP5210 Owner's Manual page 17

■ ■ Wired■Connection
Networking equipment
(modem,etc.)
LAN
LAN cable (not supplied)
Internet
C Caution
• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.
• Do not connect your PC directly to the LAN terminal of this unit.
D Note
• After you make a wired connection, set up necessary network settings. (For network setting of wired connection,
refer to "Wired" on page 41.)
• If your cable modem does not have router functions, connect a wired router.
• If your cable modem has router functions but there is no vacant port, add a hub.
• For a wired router, use a router which supports 10BASE-T / 100BASE-TX ETHERNET standard.
• Please purchase shielded LAN cables at your local store and use them when you connect to network equipment.
■ ■ Wireless■Connection
Networking equipment
(modem,etc.)
LAN
Internet
LAN cable (not supplied)
D Note
• After you made the wireless connection, set up necessary network settings. (For the network setting of wireless
connection, refer to "Wireless" on page 44.)
• For a wireless router, use a router which supports IEEE 802.11 b/g/n. ("n" type is recommended for stable
operation of the wireless network.)
• Set the wireless router to Infrastructure mode. This unit does not support Ad-hoc mode.
• Other radio devices or obstacles may cause interference to the wireless network connection.
Broadband router or hub
WAN
5 4 3
LAN cable (not supplied)
WAN
Wireless router
LAN
2 1
EN-17