Page 1
Electric Grill OWNER’S MANUAL OPERATING IN STRUC TIONS SAVE THIS MANUAL FOR FUTURE REFERENCE Model ELE4200AS WARNING NOTICE TO INSTALLER: HAZARDOUS EXPLOSION MAY RESULT IF THESE LEAVE THESE INSTRUCTIONS WARNINGS AND INSTRUCTIONS ARE IGNORED. READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS...
IMPORTANT SAFETY WARNINGS WE WANT YOU TO ASSEMBLE AND USE YOUR GRILL AS SAFELY AS POSSIBLE. THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT YOUR ATTENTION TO POSSIBLE HAZARDS AS YOU ASSEMBLE AND USE YOUR GRILL. WHEN YOU SEE THE SAFETY ALERT SYMBOL PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS! READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND OPERATING YOUR GRILL.
GENERAL WARNINGS: WARNING When using electric appliances, basic safety precautions should always be followed including the following: • Do not attempt to touch cooking surfaces or other hot surfaces. Use handles or knobs • To protect against electric shock, do not immerse cord, plugs, or heating element in water or any other liquids.
Page 5
• Do not use grill lighter fl uid, lava rocks, gasoline, Kerosene, or alcohol with this grill. • Do not use in the presence of explosive or fl ammable gases, vapor or other substances. • Keep all combustible materials at least 36” (91cm) away from the grill at all times. Do not use this grill or any other gas product under any overhang or near any combustible structures.
OPERATING THE GRILL: WARNING • Read and follow all warnings and instructions contained in the preceding sections of this manual. • DO NOT leave your grill unattended while in use. • DO NOT move your grill when in use . Lock the wheels in place to stabilize the grill. •...
TURNING ON THE GRILL: 1. Make sure the control knob is in the ‘OFF’ position. 2. Plug the temperature controller fully into the grill. 3. Plug the other end of the temperature controller into a dry GFCI 3- prong power outlet. 4.
PROPER CARE & MAINTENANCE: WARNING: If a bristle brush is used to clean any of the cooking surfaces, ensure no loose bristles remain on the cooking surfaces prior to grilling as loose bristles may attach to food. CLEANING AND MAINTENANCE: •...
TRANSPORTING AND STORAGE: WARNING • Never move a grill when hot or in use. • Never store fl ammable liquids or spray canisters under or near the grill. • DO NOT extinguish grease fi res using water. BEFORE STORING YOUR GRILL: •...
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR GRILL. WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN AS SEM BLING THIS UNIT. The following tools are required to assemble this Even Embers 2 Burner Gas Grill: • Phillips Screwdriver HARDWARE CARD:...
Page 12
Remove two screws and Step 1 two brackets • Remove two screws and two brackets from right and left rear legs • Remove right and left rear legs from side panels. Remove right and left legs Step 2 • Remove six screws from Left Right right and left rear legs...
Page 13
Step 3 • Attach rear legs to back panel using four screws removed in Step 2. Step 4 • Remove three screws from door frame. • Attach door frame cart base using three screws. Remove three screws...
Page 14
Step 5 • Remove two screws from cart base and attach back panel using four screws. (Two screws removed in Step 2) Remove two screws Step 6 Remove two screws and • Remove six screws and brackets two brackets from door frame.
Page 15
Step 7 • Attach front trim door frame. Step 8 • Lock casters • Attach casters to cart base. Unlocked Locked...
Page 16
Step 9 Install two screws • Remove two screws from cord wrap • Attach cord wrap using two screws through back panel. Remove two screws Step 10 • Remove two screws and door spacers from door handle Remove two • Attach door handle screws to door...
Page 17
Step 11 • Insert door into door frame. Step 12 • Remove fourteen screws and two protective Remove two brackets from sides and brackets back of grill body Remove six screws Remove eight screws...
Page 18
Step 13 • Remove four screws from inside fi rebox. • Install warming rack brackets using four screws. Step 14 • Install rear brackets on cart assembly removed in Step 1. • Do not fully tighten screws at this time. •...
Page 19
Step 15 • Install front brackets and secure with two screws removed in Steps 6 and • Slide rear bracket up and secure with two screws removed in Step 12. • Repeat on right side of grill body. Step 16 •...
Page 20
Step 17 • Remove four screws from Remove four side table brackets. screws • Attach right side table brackets grill body using four screws removed in Step • Attach left side table brackets grill body using four screws removed in Step Step 18 •...
Page 21
Step 17 • Install right side table using two screws removed in Step 15. Step 18 Remove two screws • Remove 2 screws on grease tray • Move handle to outside and attach with 2 screws...
Page 22
Step 19 • Insert grease tray grease cup Step 20 • Install cooking grates and warming rack...
Page 24
WARRANTY Fair Game Group warrants to the original pur chas er that the Even Embers Electric Grill is free from defects due to workmanship or materials for: Three-year: on all other stainless steel parts One-year: on element, frame, housing, cart, controller, cooking grates and other related parts Fair Game Group’s obligations under this warranty are limited to the following guidelines:...
Need help?
Do you have a question about the ELE4200AS and is the answer not in the manual?
Questions and answers