EZ-ON 86Y-CAR CAM Installation Instructions

86Y-CAR CAM
INSTALLATION INSTRUCTIONS
IMPORTANT INFO
Meets FMVSS213
Installation of 86Y requires the use of a tether anchor.
Use the vehicle's factory-installed (or EZ-ON's tether hardware kit) tether anchor.
If the vehicle manufacturer states a tether anchor weight limit and the child
exceeds that weight, install/use EZ-ON's tether hardware.
Instructions for EZ-ON's hardware kit are included on the kit's assembly bag;
video instructions are also available at ezonpro.com.
Passengers using EZ-ON transportation vest systems 86Y:
Must weigh over 66 lbs.
Must utilize a seat belt, per vest instructions.
Should not ride in a booster seat.
When heavy clothing, like winter jackets, are worn, the vest must be worn
underneath.
Recommended replacement 6 years after date of manufacturing.
WARNING
Death or serious injury can occur If
manufacturer's instructions are not followed
correctly. Read below warning information for
replacement recommendations.
WARNING: All EZ-ON products are dynamically tested to meet NHTSA standards. Replace product if it is damaged, frayed, or has been in a
crash. Recommended replacement period is six years. EZ-ON Products are not liable for injury if these recommendations are not followed.
605 Commerce Way West
PO Box 660
Jupiter, FL 33458
REGISTER
Register this transportation vest
to be notified of a safety recall.
561.747.6920
cs@ezonpro.com
For passengers over 66 lbs
WARRANTY
EZ-ON Products stands behind the products we
make. Warranty covers any defects in material or
workmanships under normal use during the
warranty period. We will repair or replace product
defects for 1 year from manufacturer date.
EZONPRO.COM