Download Print this page

EZ-ON 100TM Installation Instructions

Tether mount for family vehicle

EZ-ON PRODUCTS

100TM

TETHER MOUNT (For Family Vehicle)

IMPORTANT INFO

• Meets FMVSS213.

• Use Only with EZ-ON Vests. Compatible Vest include: 303Z, 403PB.

• Install tether hardware kit if the passenger weight exceeds the vehicles tether anchor weight

determined by the vehicle manufacturer.

• Must use factory seatbelt.

• Use on school bus seats that have entry between the seat bottom and the seat back.

EZ-ON Products stands behind the products we make. Warranty covers any defects in material or workmanships under

normal use during the warranty period. We will repair or replace product defects for 1 year from manufacturer date.

Death or serious injury can occur If manufacturer's instructions are not followed correctly.

All EZ-ON products are dynamically tested to meet NHTSA standards. Please follow washing

instructions on product tag. Replace product if it is damaged, frayed, or has been in a crash.

Recommended replacement after six years.

EZ-ON Products are not liable for injury if these recommendations are not followed.

EMERGENCY CUTTING

When evacuating the passenger in a safety vest, the vest webbing is never cut. One cut of the mount

webbing above the anchor will allow the passenger to evacuate the vehicle wearing the safety vest

and one cut of the lap belt.

1-800-323-6598

www.ezonpro.com

Table of Contents

Do you have a question about the 100TM and is the answer not in the manual?

Page 1 • Use on school bus seats that have entry between the seat bottom and the seat back. WARRANTY EZ-ON Products stands behind the products we make. Warranty covers any defects in material or workmanships under normal use during the warranty period. We will repair or replace product defects for 1 year from manufacturer date.
Page 2 1-800-323-6598 EZ-ON PRODUCTS 1-800-323-6598 www.ezonpro.com www.ezonpro.com 100TM INSTALLATION INSTRUCTIONS TETHER MOUNT (For Family Vehicle) 1. Locate tether anchor bracket. * Check vehicle owner’s manual to locate factory installed tether bracket. * Instructions for hardware kit are found in the Tether Kit assembly bag.