Table of Contents 1. SPECIFICATIONS 2. SAFETY 2.1 SAFETY PRECAUTIONS 2.2 INTRODUCTION 3. DAILY OPERATION 3.1 CONTROL 3.2 SETTINGS 3.3 FIRST USE 4. SMART REMOTE CONTROLLER 4.1 READING THE DISPLAY 4.2 CONNECTING TO A WIFI NETWORK 4.3 CONFIGURE TIME AND DATE 4.4 SETTING TARGET TEMPERATURE 4.5 SETTING TARGET HUMIDITY 4.6 EMAIL ALERTS...
2. SAFETY CAUTION Please read this manual carefully before attempting to install the Opticlimate Revomax II. If you are not comfortable with the installation of high performance climate control systems, you should seek the services of an installation professional. These products may represent a possible shock or fire hazard if improperly installed or attached in any way.
2.2 INTRODUCTION The OptiClimate RevomaxII is a state-of-the-art climate control system designed to provide an optimal growing environment for a wide variety of plant species. Leveraging advanced Infinity DC inverter technology, this system offers unmatched flexibility in climate control, allowing for precise adjustments up to one tenth Hertz increments in cooling, heating, dehumidification, and air filtration.
After the system is fully booted up, make sure to set date and time, the target temperature and humidity for both day- and night time. Continue to chapter 4.3, 4.4 and 4.5 to set your preferred values. If you operate with an OptiClimate watercooler also make sure to set the watercooler ‘active’ in the controller. Instructions in chapter 4.12.
4. SMART REMOTE CONTROLLER 4.1 READING THE DISPLAY Reading the display When the system is fully booted up, you will be presented with the basic home screen (screen 1). In the right upper corner you will find the home icon which lets you switch to dashboard mode (screen 2).
4.2 CONNECTING TO A WIFI NETWORK For receiving frequent updates and remote access, connect the Smart Remote Controller to a WiFi network. To do this you need to access the Microsoft Windows based environment. Navigate to the Remote Access menu: Menu > Settings > User Preferences >...
4.3 CONFIGURE TIME AND DATE from the home screen, tap the menu button navigate to: settings > user preferences > set time/date change the settings with the +/- icons and click save Note: the settings influence the day/night cycle Set Time/Date menu 4.4 SETTING TARGET TEMPERATURE from the home screen tap the temperature area tap the ‘sun’...
• night mode: always in NIGHT mode 4.8 TIMER SETTINGS navigate to menu > settings > opticlimate settings > start of day, hours tap the value you want to adjust, adjust by using the +/- buttons click save settings repeat steps 2 and 3 for the other values OptiClimate Settings menu - timer 4.9 PREHEAT...
flow must be adjusted manually by opening and closing a valve that is installed directly OptiClimate Settings menu - water valve after the pump in the closed loop. The water flow regulates the refrigerant pressure in the RevomaxII.
5 FIRMWARE UPDATES Firmware updates release regularly to add new functionality and fix bugs. Connected fixtures will be updated in one action. To execute an update: Option 1: Wifi Make sure to have an active wifi connection on your Smart Remote Controller 2.
6 WARRANTY The Revomax II series and accessories are designed and manufactured with maximum care and craftsmanship. Airlux Technologies warrants the delivered goods to be free of defects for the duration of the applicable warranty period under normal use and conditions after the original purchase date.
Need help?
Do you have a question about the REVOMAX II and is the answer not in the manual?
Questions and answers