Setting The Time - Memorex PH2400 - 2.4GHz Teleball Cordless Phone Operating Instructions Manual

MSP-PH2400.O/M.QXD 9/11/02
SET-UP INSTRUCTIONS (CONTINUED)

SETTING THE TIME

It is necessary to set the internal clock time of the phone to display the time in the
Caller ID display when incoming calls are received. If you subscribe to Caller ID,
the time and date are automatically set when the first call is received. If the
time is not automatically set, follow the steps below:
1
While in the Standby mode, press the
PROG/SCAN button.
3
Press the EDIT/FLASH button.
5
Press the PROG/SCAN button to exit
the program mode.
3:46 PM Page 10
2
Press the Key button 3
Up/Down buttons
Set setting.
4
Using the Key buttons, enter the
month, day, hour, minute and AM/PM
(press key button 1 for AM, 2 for PM).
The cursor will move automatically
after each entry. Enter two digits for
each setting, for example, for April,
press 0,4.
10
2
1
, or the
to select the Time