MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 1 IMPORTANT SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: Uninsulated Dangerous Voltage, that may be of sufficient magnitude to constitute a risk of electric shock to persons is...
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 2 IMPORTANT SAFETY PRECAUTIONS (CONTINUED) Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock.
Page 4
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 3 IMPORTANT SAFETY PRECAUTIONS (CONTINUED) 8. Do not store this product, or the battery provided with or identified for use with this product, in a high-temperature area. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be stabilized at room temperature prior to use.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 4 CONTENTS Important Safety Precautions ..1 Call Waiting ........20 Checking the Caller ID Log ....21 Contents..........4 Deleting One Name/Number from the Caller ID Log ....21 Location of Controls ......5 Deleting Name(s)/Number(s) from the Caller ID Log ......21 Installation Instructions....6 Dialing a Number in the Caller Installation of the Rechargeable...
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 6 INSTALLATION INSTRUCTIONS 1. Carefully unpack and remove your unit from the box. 2. Make sure all the items have been included: • Base Unit • AC Adapter • Handset Unit • Telephone Cord • Rechargeable Ni-Cd Battery Pack •...
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 7 INSTALLATION INSTRUCTIONS (CONTINUED) Installation of the Rechargeable Battery Remove the battery cover located on If replacing an old battery pack, unplug the rear of the handset by sliding it the battery connector and remove it downward.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 8 SET-UP INSTRUCTIONS SETTING THE LANGUAGE Set the language (ENGLISH, SPANISH, FRENCH) as follows: While in the Standby mode, press the Press the Key button 1 , or the PROG/SCAN button. Up/Down buttons to select the Language setting.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 9 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE SILENT OPTION You can set this telephone to NOT ring when receiving a call from a caller who has blocked their telephone number. While in the Standby mode, press the Press the Key button 2 , or the PROG/SCAN button.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 10 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE TIME It is necessary to set the internal clock time of the phone to display the time in the Caller ID display when incoming calls are received. If you subscribe to Caller ID, the time and date are automatically set when the first call is received.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 11 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE AREA CODE Set the phone to your local area code as described below. If you live in a town with more than one area code, do not enter an area code for this option. While in the Standby mode, press the Press the Key button 4 , or the...
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 12 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE LCD CONTRAST There are three contrast levels for this telephone. Set the level as follows: While in the Standby mode, press the Press the Key button 5 , or the PROG/SCAN button.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 13 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE PBX NUMBER This telephone enables you to preset the PBX number (such as 8 or 9), while you are using a switchboard system. While in the Standby mode, press the Press the Key button 6 , or the PROG/SCAN button.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 14 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE PBX MODE This telephone enables you to turn the PBX system On or Off, depending on the telephone system being used. While in the Standby mode, press the Press the Key button 7 , or the PROG/SCAN button.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 15 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE PAUSE TIME This telephone enables you to adjust the pause time when placing a call using a switchboard system or dialing long distance calls . While in the Standby mode, press the Press the Key button 8 , or the PROG/SCAN button.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 16 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE MSG (MESSAGE) WAITING This will enable to you to turn off the Message Waiting indicator. While in the Standby mode, press the Press the Key button 9 , or the PROG/SCAN button.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 17 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE RINGER This will enable you to turn the ringer On or Off. While in the Standby mode, press the Press the Key button 0 , or the PROG/SCAN button. Up/Down buttons to select the Ringer setting.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 18 BASIC OPERATION PLACING A CALL After the battery has been fully charged, Press the Key buttons (0-9) to dial press the TALK button and listen for the phone number you wish to call. a dial tone; the IN USE indicator on the base will light and “TALKING”...
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 19 BASIC OPERATION (CONTINUED) ENDING A CALL CHANNEL SELECTION To end a call, simply return the This telephone allows you to select a handset to the base, or press the channel from the 40 frequencies TALK button on the handset;...
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 20 BASIC OPERATION (CONTINUED) USING THE BASE PAGE BUTTON USING THE FLASH BUTTON Press the PAGE button on the base to Press the EDIT/FLASH button to momentarily hang up. This is useful for locate the handset when not in use; custom calling features, such as Call the handset will beep for 20 seconds.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 21 BASIC OPERATION (CONTINUED) CHECKING THE CALLER ID LOG To scroll through the calls, press the CALL button followed by the Down button to view the latest calls, or press the Up button to start from the first call. When there have been new calls, the Msg/New Call indicator will blink.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 22 BASIC OPERATION (CONTINUED) DIALING A NUMBER IN THE CALLER ID DISPLAY You can automatically call a number from the caller ID log as follows: Scroll through the calls to select a Press the OPTION button repeatedly number to dial by pressing the CALL until the desired prefixes appear.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 23 BASIC OPERATION (CONTINUED) ADDING A DIRECTORY ENTRY The directory can store up to 20 name/telephone numbers. Press the DIR/SAVE button. Press the EDIT/FLASH button. Using the Key buttons (0-9, *, #) Using the Key buttons (0-9, *, #) enter the name as described on page enter the telephone number, then 24, then press the Down button...
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 24 BASIC OPERATION (CONTINUED) ENTERING A NAME USING THE KEY BUTTONS When entering names into the directory, you must use the Key buttons (0-9,*,#). To use the buttons to add names, perform the following steps: Follow steps one and two on the See the chart below and using the Key previous page to program the...
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 25 BASIC OPERATION (CONTINUED) SPEED VIEWING A DIRECTORY You can quickly locate a name in the directory. Press the DIR/SAVE button. Using the Key buttons , enter the first letter of the name. Press the Down button to locate all the names with that starting letter.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 26 BASIC OPERATION (CONTINUED) EDITING A DIRECTORY ENTRY To select and edit a name/number from the directory, follow the steps below: Press the DIR/SAVE button , followed Press the EDIT/FLASH button to edit the name. by the Up or Down button to find...
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 27 BASIC OPERATION (CONTINUED) DELETING ONE NAME/NUMBER FROM THE DIRECTORY To delete a name/number from the directory, follow the steps below: While in the Standby mode, press the Press and hold the DEL/RE-PA button DIR/SAVE button , followed by the to delete.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 28 TROUBLESHOOTING GUIDE SYMPTOM SOLUTION No dial tone. • Make sure the telephone line cord is connected properly to the modular wall jack. No power on the • Make sure the battery pack is properly connected handset.
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 29 CARE AND MAINTENANCE 1. Clean your phone with a damp (never wet) cloth. Solvent or detergent should never be used. 2. Avoid operating your unit under direct sunlight or in hot, humid or dusty places. 3.
Page 31
MSP-PH2400.O/M.QXD 9/11/02 3:46 PM Page 30 Memcorp, Inc. Weston, FL Printed in China Visit our website at www.memcorpinc.com...