Indicator Lights And Tones; Alert Tones - AT&T 4939 - - Corded Digital Answering System Quick Start Manual

Indicator lights and tones

Indicator lights

Alert tones

Beep
(Key tone)
Beeeep
(One short tone)
Beeeeeeeep
(One long beep)
Three short high-pitched beeps
(Confirmation tone)
One long low-pitched beep
(Error tone)
Beep-beep every  seconds
(Message alert tone)
Four high- then low-pitched
beeps
(Priority call tone)
IN USE
On when the line is in use or the answering
system is answering a call.
ANS ON/OFF
On when the answering system is on.
PLAY/STOP
Flashes when there are new (unreviewed)
messages.
AUDIO ASSIST
On when the audio assistance feature is in use.
MUTE
On when the microphone is muted.
SPEAKER
On when the speakerphone is in use.
A key is pressed.
Command of the answering system is completed successfully.
The answering system begins to record an announcement or a
memo.
Command is completed successfully.
• Command has failed.
• The number you entered in the directory or two-touch
memory is over 4 digits.
• The name you entered in the directory is over  characters.
• The two-touch memory location you accessed is empty.
• There are no telephone numbers stored in the directory.
• You have reached the end of the directory records.
• There are no call history entries.
• There is no telephone number in the call history entry you
dialed.
• There is no telephone number in the call history entry you
saved in the directory or two-touch memory.
There are new messages.
The incoming call is a priority call.