Ricoh Priport DX 4640PD Printer Reference page 91

Status
<Macintosh only>
It takes a long time to print from
the Macintosh G3 or G4 via a
hub.
The same page is being master
made many times.
Fine dot patterns are not printed • RPCS
Solid lines are printed as
broken lines.
Two or more sheets are fed
together.
The set option cannot be
selected in the print menu.
Possible Causes, Descriptions, and Solutions
When the printer is connected to a Macintosh computer
equipped with the G3 or G4 processor via a hub, it may take
a long time to transfer data on a 100BASE-TX from the Mac-
intosh to the printer.
Make sure to clear the [Collate] check box in the [Print] dialog
box of the application.
< Windows 2000/XP and Windows Server 2003 only >
Even if the check mark is cleared in the [Collated] check box,
master making may be done every time a page is going to be
printed. In this case, make sure to clear the [collated] check
box displayed when selecting [Copy Count] in [Advanced] dia-
log box of the printer driver.
Change the [Dithering:] setting under the [Image Adjust-
ments] tab in the [Change User Settings] dialog box under
the [Print Quality] tab in the [Printer Properties] dialog box.
• PostScript3
Change the [Dithering:] setting in the [Advanced] dialog box
under the printer driver's [Print Quality] tab.
In the RPCS printer driver [Change User Settings] dialog box,
change the [Dithering:] setting on the [Image Adjustments] tab.
For details, see the printer driver Help.
In the RPCS printer driver [Change User Settings] dialog box,
change the [Dithering:] setting on the [Image Adjustments] tab.
For details, see the printer driver Help.
The option may not be set correctly.
• Windows95/98/Me
Set the option correctly in the [Device Options] tab.
• Windows 2000/XP and Windows Server 2003
Set the option correctly in the [Device Settings] tab.
• Windows NT 4.0
Set the option correctly in the [Device Settings] tab.
• Mac OS
Set the option configuration correctly in [Chooser] in the
Apple menu.
Other Printing Problems
5
85