Dell Color Laser Printer 7130cdn User Manual page 48

Printing
4. When the control panel prompts you to confirm the type and size of paper in the tray, press
the OK button to use the current tray setup. If you loaded a new size or type of paper in the
tray, do the following:
a. Select Change setup, then press the OK button.
b. Select the appropriate paper type, then press the OK button.
a. Select the appropriate paper size, then press the OK button. For some sizes that can be
loaded in either direction, you need to select the size with the letters LEF (Long-Edge
Feed). If you loaded a custom paper size, select it if it is already defined. If not, select
New Custom Size for the paper size and follow the prompts; see
Paper on page 62 for more information.
Short-Edge Feed
Use short-edge feed for sizes that do not fit long-edge feed or when the media curls or peels, such as
labels.
1. Open Tray 1 (MPT).
2. Load the paper or other media with the short edge against the printer.
• For single-sided printing, place side one facedown, with the top of the page entering the
printer first. Prepunched holes should be at the front of the printer.
48 Dell 7130cdn Professional Color Printer
User Guide
Using Custom Size
7130-036
7130-123