Chefman Custom-Temp RJ11-18D-WMC Manual page 9

Quick Start: How to Use the Kettle
1.
Place the base on a flat surface.
2.
Remove the lid and fill the kettle to at least the MIN line (0.5 litres) and not
above the MAX line (1.8 litres) with cold, fresh water. Return the lid to the
kettle, and place the kettle securely onto its base.
3.
Plug in the unit. The kettle will beep once and the LED ring near the kettle's
base will light up in white, meaning it's in Standby mode.
4.
After 2 seconds, the default temperature of 100˚C (212˚F) will display on
the screen (after first use, the kettle will default to your previously used
temperature). To choose a different temperature, press the SET TEMP
button repeatedly to toggle through the available choices (see table on p.
10). You can also press the BOIL button to quickly jump to 100˚C/212˚F (full
boil). To switch between Fahrenheit and Celsius, press and hold the SET
TEMP button for 3 seconds.
5.
When your desired temperature displays on the screen, press START | STOP
to begin heating. The LED ring at the base will turn red, to indicate it's
heating. During heating, the water's current temperature will display
on the screen.
6.
When the kettle reaches the desired temperature, the kettle will beep three
times, READY will display in green on the panel, and the LED ring at the
kettle's base will turn green, indicating it is in Keep Hot mode (see p. 10).
7.
To serve, lift the kettle off its base and pour.
RJ11-18D-WMC_UG_EN_LIVE_030325.indd 9 RJ11-18D-WMC_UG_EN_LIVE_030325.indd 9
9 9
3/3/25 12:51 PM 3/3/25 12:51 PM