EQUATION DF-HT5363P User Manual page 6

press button to set the temperature on a range of
b) Previous set temperature will not change when enter into setting mode unless you press
button to reset the temperature,.
c) If you don't set the temperature in 5 seconds or you press other buttons except
display panel will exit the temperature setting and will show setting temperature immediately.
d) If the room temperature is higher than the temperature setting, PTC heating elements and
mode indicator on the panel will stop automatically, while fan will operate for another 10
seconds before it stops. When the room temperature is 2 ℃ below the temperature setting,
PTC heating elements restart and heating mode will show on the display panel. The machine
continues to work.
8. Press to set the body sensor function
a) Body sensor function: Press
sensor function open; press agin, the body sensor function stops.
b) When turning on body sensor function, the program will detect human body: if the
machine can feel human beings, it works as normal. If it cannot feed human, PTC will
stop working after 2 minutes, and fan will stop after 10 second, the body sensor indicator
light twinkling. During this period, you can set the mode and function, but the heater will
not act as your new setting till it can feel human body.
9. When you press
operate at previous setting (except the timer function), given power supply keep connecting.
Remark: If the previous setting is High Power, when you restart the machine, LED
up, the machine will operate at Low Power first for 20 seconds, and then change to High Power.
10. The machine operates more than 1 minute, the LED indicated lights will automatically turn
to 1/3 dimmer to avoid influences in night time, the lights will be back to normal when you press
any button.
Remote control operation panel
 Pull out the battery cover at the back of remote control (see Picture 2).
 Pay attention to the battery polarity, and insert the battery (see Picture 3)
 Put back the battery cover into the remote control.
, the indicator of body sensor lights up, the body
button to restart the machine on Standby Mode, the machine will
14℃、18℃、22℃、26℃
.
, the
lights