Sonoff GK-200MP2-B Manual

Operating Instruction

1. Download APP
   
   Android™ & iOS

2. Power on
   After powering on, the camera defaults to factory reset during the first use. A voice prompt indicates that it turns on successfully.
   
   If change users, please long press "RESET" button for 3s on the bottom of the camera until you hear "Reset success", then operate the next step following the voice prompt after successful reboot.
   
3. Add camera
   
   Tap "+" on the APP to add the camera after you hear "please use mobile phone for Wi-Fi configuration" as shown below:
   

Specifications

Product Introduction

The camera can connect Ethernet cable to ensure stable video monitoring, avoiding causing video monitoring interruptions because of unstable Wi-Fi network.

Local network connection method for camera

Plug into the Ethernet cable and select "Scan QR code", then scan the QR code on the back of the camera and select the same ID in the "Devices on LAN" list with the current device. Tap "Confirm" to add the camera.
Make sure that your mobile phone and the Ethernet cable access the same network.
Before connecting the ethernet network, if you have connected the device via Wi-Fi network, to ensure normal use of ethernet network, please delete the connected device in eWeLink app.

Features

GK-200MP2-B is a Wi-Fi wireless IP security camera that can be used for real-time monitoring. You can control the monitoring images, adjust images resolution, pan and tilt angle, set "activity alert" notification to push an alarm message to your smartphone. It allows you to shoot, record, remotely talk, and you can share the camera to your family to control together.

If the TF card has been inserted, the camera will alarm and push a notification to eWeLink APP and automatically records a 40s video and stores in the TF card when motion detection is triggered.
The TF card is required with a transmission speed of at least class10.

Infrared night vision

Built-in 2 infrared night vision LEDs which ensure the night vision distance of 15m. The infrared LEDs will be automatically activated in a low-light condition to provide a clear monitoring image.

Bind camera

You can add it on the APP control page of SONOFF devices, like BASIC, S26, TX and more after the camera is connected with the eWeLink APP.

Factory Reset

Long press "RESET" button on the bottom of the camera for 3s until you hear "Reset success" and release, then a sound prompt indicates that it restarts successfully. The camera is reset successfully and enters quick pairing mode.

Please reset the camera to factory defaults if you want to use other Wi-Fi networks, then reconnect the network.

Install camera

The camera can be placed to desktop, mounted on the wall or ceiling to monitor.

• Don't expose the camera to sun for very long.
• Don't get the camera wet or leave it where it can get wet.
• If videos gets blurred, please wipe the lens using a cloth with alcohol to keep clean.
• To avoid to disturb neighbors and ensure the speaker a long lifetime, please don't get motion detection alert on for very long.

Common Problems

Q: Fail to connect Wi-Fi and pair?
A: Please check the following problems and re-add the device when you connect Wi-Fi

1. Make sure correct Wi-Fi password and do not connect the Ethernet cable;
2. Only support 2.4GHz Wi-Fi network. Please disable 5GHz Wi-Fi network if you use dual band router;
3. Keep the camera closer to your router;
4. Please pair and connect the camera in an environment without interference.

Q: Is it normal for the speaker to make squealing sound?
A: Your smartphone and the camera maybe cause mutual interference and lead to the squealing sound from speaker when you use "Talk". Please keep your smartphone away form the camera to eliminate interference.

Q: Why there is no sound when I communicate with the camera on my smartphone?
A: Make sure that you enable "Talk" function on your smartphone. If it doesn't receive the sound from the camera, please check if the microphone is muted.

Q: How to play back video recordings? Can the videos of TF card be played on my computer?
A: Power off the camera and insert the TF card on your computer to play back videos.

Q: How to enable "Activity detection reminder" on the eWeLink APP?
A: Tap "" on the upper right corner on the camera page, access setting page and enable "Activity detection reminder", then select the right one from "high, medium and low sensitivity" and turn on "Sound Alert". The camera will alarm once any motion is detected.

Q: Why videos get stuck when playing?
A: To ensure videos are playing fluently, please connect broadband network. We recommend to use the uplink broadband of 2Mbps for the camera and the downlink broadband of 2Mbps for the smartphone. The videos may get stuck if the camera is connected to a Wi-Fi network that many users connected, please plug the Ethernet cable and try.

Q: How to avoid triggering false alarms?
A: The motion detection is used to monitor object movement rather than human movement, so ray of light, shadow of trees, flying animal can trigger activity detection reminder. To prevent triggering false alarms, please set the motion detection sensitivity the "low level".