Instructions pertaining to risk of
fire, electric shock, or injury to persons.
PERSONAL INJURY HAZARD
When using electric appliances
should always be followed,
including the following:
Read all the instructions before using the
To reduce the risk of injury, close
is necessary when appliance
is used near children.
Do not put fingers or hands into waste
Turn the power switch to the OFF posi-
tion before attempting
to clear a jam or
remove an object from the disposer,
to loosen a jam In a
waster disposer, use a self service jam-
breaker wrench as described
in Use and
to remove objects
from a waster disposer, use lony-han-
dled tongs or pliers.
Failure to follow these instructions
result in serious injury.
Form No./Part No. 71620/4211597
7. To reduce the risk of injury by materials
that may be expelled
by a food-waste
disposer, place the stopper in the
position when grinding
not put the followiny
into a disposer:
a. Clam and oyster shells.
c. Glass, china or plastic.
Large, whole bones.
e. Metal, such as bottle caps, tin cans,
or aluminum foil.
8. When not operating a disposer, leave the
drain cover in place to reduce the risk of
objects falling into the disposer
9. Before pressing red reset button, be
switch is In the off
and on batch feed models
remove the stopper from the run
Electrical Shock Hazard
Electrical ground is
required on this appliance.
Do Not ground to a gas pipe.
Do Not change the power supply cord
plug on cord connected
does not fit the outlet, have a proper outlet
installed by a qualified electrician.
Check with a qualified
if you are
not sure the appliance
Failure to follow these instructions could
result in death or electric shock.
For service information,
call toll-free 1-800-253-l
10. a. GROUNDING INSTRUCTIONS FOR
must be yrounded.
In the event of a malfunction
path of least resrstance for electric
current to reduce the risk of electric
shock. If this appliance
with a cord having an equipment-
plug, the plug must be
into an appropriate
that is properly
local codes and ordinances.
b. GROUNDING INSTRUCTIONS FOR
PERMANENTLY CONNECTED UNITS:
must be connected
metal, permanent wiring
system; or an equipment-grounding
must be run wrth the clrcurt
terminal or lead
on the appliance.
INSTALLER - Please leave Installation
Instructions with the homeowner
In U S A.