Advertisement
PLEASE NOTE
In this document, the terms "Nintendo Switch", "console" and "Nintendo Switch console" also refer to the Nintendo Switch Lite system, unless otherwise stated. Any references to the Joy-Con controllers, to multiple batteries and to the vibration feature do not apply to the Nintendo Switch Lite system.
IMPORTANT INFORMATION FOR PARENTS
Nintendo Switch offers a variety of exciting features. However, as a parent, you might want to restrict certain things which you deem unsuitable for children. We have prepared special steps to enable you to make Nintendo Switch safe for your family.
Nintendo Switch Parental Controls are available on the console itself and can also be controlled by an app on your smart device. During the initial setup of your console, you can select how you would like to set Parental Controls. Follow the on-screen instructions to finish setting Parental Controls.
On the console itself, you can use a PIN to set and change your desired Parental Controls settings. Your PIN can also be used to temporarily disable Parental Controls if you should wish to do so.
You can also change your settings at any time – even when you are away from home – using the dedicated app.
Purchase Restrictions in Nintendo eShop
In order to restrict Nintendo eShop purchases, you must associate your child's Nintendo Account with your Nintendo Account. Access your Nintendo Account on a smart device or PC to create an account for your child or associate an existing account with yours and set restrictions as you deem appropriate in the Nintendo Account settings.
https://accounts.nintendo.com
(not applicable to Nintendo Switch Lite)
Charge and pair controllers before using them for the first time. You can charge and pair controllers by attaching them directly to the console or using the Joy-Con charging grip (HAC-012) (sold separately).
To charge the controllers fully when they are attached to the console, ensure that the console is charging at the same time.
When playing with a Joy-Con detached from the console, make sure to use a Joy-Con strap accessory. To attach a Joy-Con strap accessory, match the + or – Button on the controller with the same symbol on the accessory. Slide the Joy-Con strap accessory onto the controller and lock it using the slide lock. Then, put on and tighten the wrist strap. Hold the controller securely and do not let go of it. Allow adequate room around you during gameplay. When you are done playing, release the slide lock before detaching the accessory from the Joy-Con.
When attaching a Joy-Con to the console or attaching a Joy-Con strap accessory, make sure that you orientate the Joy-Con correctly and slide it into place until you hear a clicking sound. When detaching a Joy-Con from the console or another device, make sure that you hold the button on the back and slide upwards.
This product has two available wireless network ports, Wi-Fi (internet) and Bluetooth*.
Play modes | ![]() TV mode | ![]() Tabletop mode | ![]() Handheld mode** |
Wi-Fi | Active / OFF | Active / OFF | Active / OFF |
Activating Wi-Fi | Go to Internet in ![]() | ||
Deactivating Wi-Fi | Start ![]() | ||
Bluetooth | Always Active*** | Active / OFF | Active / OFF |
Activating Bluetooth | Go to Flight Mode in ![]() | ||
Deactivating Bluetooth | Start ![]() |
* The Bluetooth network port is not available for Nintendo Switch Lite.
** TV and tabletop modes are not applicable to Nintendo Switch Lite. Only handheld mode is available.
*** The Bluetooth network port in TV mode is always active, because the console will always be reactivated using a controller paired via Bluetooth.
Nintendo Switch | Operating frequency band(s) | Maximum radio-frequency power | ||||||
Bluetooth | 2402-2480MHz | 3dBm | ||||||
Wi-Fi | 2412-2472MHz / 5180-5250MHz / 5250-5320 MHz (for indoor use only)* / 5500-5700MHz | 19dBm / 15dBm / 15dBm | ||||||
Nintendo Switch – OLED Model | Operating frequency band(s) | Maximum radio-frequency power | ||||||
Bluetooth | 2402-2480MHz | 2dBm | ||||||
Wi-Fi | 2412-2472MHz / 5180-5250MHz / 5250-5320 MHz (for indoor use only)* / 5500-5700MHz | 15dBm / 7.5dBm / 7.5dBm | ||||||
Joy-Con (L) | Operating frequency band(s) | Maximum radio-frequency power | ||||||
Bluetooth | 2402-2480MHz | 4dBm | ||||||
Joy-Con (R) | Operating frequency band(s) | Maximum radio-frequency power | Maximum field strength | |||||
Bluetooth | 2402-2480MHz | 4dBm | – | |||||
NFC | 13.56MHz | – | -6dBµA/m | |||||
Nintendo Switch Lite | Operating frequency band(s) | Maximum radio-frequency power | Maximum field strength | |||||
Bluetooth | 2402-2480MHz | 2dBm | – | |||||
Wi-Fi | 2412-2472MHz / 5180-5250 MHz / 5250-5320MHz (for indoor use only)* / 5500-5700MHz | 19dBm / 15dBm / 15dBm | – | |||||
NFC | 13.56MHz | – | -1dBµA/m | |||||
* This restriction applies in the following countries: Austria (AT), Belgium (BE), Bulgaria (BG), Croatia (HR), Cyprus (CY), Czech Republic (CZ), Denmark (DK), Estonia (EE), Finland (FI), France (FR), Germany (DE), Greece (EL), Hungary (HU), Ireland (IE), Italy (IT), Latvia (LV), Lithuania (LT), Luxembourg (LU), Malta (MT), Netherlands (NL), Poland (PL), Portugal (PT), Romania (RO), Slovakia (SK), Slovenia (SI), Spain (ES), Sweden (SE), Switzerland (CH) and United Kingdom (Northern Ireland) (UK(NI)). | ||||||||
Ecodesign Information for the Nintendo Switch AC Adapter | ||||||||
Commercial registration number of EU authorised representative | HRB Nr. 135709 | |||||||
Model identifier | HAC-002(UKV) | |||||||
Input voltage | AC 100-240V | |||||||
Input AC frequency | 50/60Hz | |||||||
Output voltage * | DC 5.0V | DC 15.0V | ||||||
Output current | 1.5A | 2.6A | ||||||
Output power | 7.5W | 39.0W | ||||||
Average active efficiency | 76.8% | 88.5% | ||||||
Efficiency at low load (10%) | - | 83.0% | ||||||
No-load power consumption | 0.08W | 0.08W |
* The AC Adapter (HAC-002(UKV)) has two types of DC output power, and the output voltage is automatically changed depending on the connected device.
Product Ecodesign Information:
Information concerning this product's energy efficiency and resource efficiency is available at
https://nintendo.com/eu/switch-ecodesign
Warning concerning changing/deactivating the power management functions
Auto-Sleep: If you increase the time or select "Never", the console will consume more energy.
Maintain Wired Connection in Sleep Mode (Nintendo Switch – OLED Model only): If this option is enabled and the console uses a wired internet connection, downloads will start immediately even when the console is in sleep mode, but the console will consume more energy.
Power Requirements and EU Common Charger Information | |
![]() | Nintendo Switch (HAC-001(-01))* |
The power delivered by the charger must be between min 2.5 watts required by the radio equipment, and max 10 watts in order to achieve the maximum charging speed. | |
![]() | Nintendo Switch – OLED Model (HEG-001)* |
The power delivered by the charger must be between min 2.5 watts required by the radio equipment, and max 14 watts in order to achieve the maximum charging speed. | |
![]() | Nintendo Switch Lite (HDH-001)* |
The power delivered by the charger must be between min 2.5 watts required by the radio equipment, and max 9 watts in order to achieve the maximum charging speed. |
* TV mode (not applicable to Nintendo Switch Lite) requires output power of 39 watts. This is higher than the power requirements for charging given above. All models support USB PD fast charging and are capable of being recharged by means of wired charging at voltages up to 15 volts.
Please read and observe the health and safety information. Failure to do so could result in injury or damage. Adults should supervise the use of this product by children.
Seizures
Eye Strain, Motion Sickness and Repetitive Motion Injuries
If any of these symptoms persist, consult a doctor.
Pregnancy and Medical Conditions
Batteries
Electrical Safety
General
CAREFUL USAGE
Please make sure you read the Health and Safety Information page on the Nintendo Switch console once it has been set up. You can access this information from SUPPORT in (System Settings) on the HOME Menu.
To make a claim, please contact Nintendo Customer Support via support.nintendo.com
For further information or, in particular, details of any charges for such services, please contact Nintendo Customer Support via support.nintendo.com
For more information about Nintendo Switch, please visit the Nintendo Support website.
https://support.nintendo.com
For explanation of the symbols and markings used on this product, see https://www.nintendo.com/eu/docs
Manufacturer: Nintendo Co., Ltd., Kyoto 601-8501, Japan
EU authorised representative & importer:
Nintendo of Europe SE, Goldsteinstrasse 235, 60528 Frankfurt, Germany
UK economic operator: Nintendo UK, Quadrant, 55-57 High Street, Windsor SL4 1LP, UK
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Switch OLED and is the answer not in the manual?
Questions and answers