Table of Contents
Advertisement
Quick Links
UG143158
KIT_CSK_BGT60UTR11AIP
XENSIV™ Connected Sensor Kit
About this document
Scope and purpose
This user guide describes the function, circuitry, and performance of the XENSIV™ BGT60UTR11AIP Wing board,
part of Infineon's XENSIV™ BGT60UTR11AIP Connected Sensor Kit (KIT_CSK_BGT60UTR11AIP).
Intended audience
The intended audience for this document is design engineers, technicians, and developers of electronic
systems, working with Infineon's XENSIV™ 60 GHz radar sensors.
Reference Board/Kit
Product(s) embedded on a PCB with a focus on specific applications and defined use cases that may include
software. PCB and auxiliary circuits are optimized for the requirements of the target application.
Note:
Boards do not necessarily meet safety, EMI, quality standards (for example UL, CE) requirements.
User guide
Please read the sections "Important notice" and "Warnings" at the end of this document
Revision 1.00
www.infineon.com
2025-03-18
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Infineon KIT CSK BGT60UTR11AIP
Summary of Contents for Infineon KIT CSK BGT60UTR11AIP
-
Page 1: About This Document
Scope and purpose This user guide describes the function, circuitry, and performance of the XENSIV™ BGT60UTR11AIP Wing board, part of Infineon’s XENSIV™ BGT60UTR11AIP Connected Sensor Kit (KIT_CSK_BGT60UTR11AIP). Intended audience The intended audience for this document is design engineers, technicians, and developers of electronic systems, working with Infineon’s XENSIV™... -
Page 2: Important Notice
Infineon Technologies. The design of the Evaluation Boards and Reference Boards has been tested by Infineon Technologies only as described in this document. The design is not qualified in terms of safety requirements, manufacturing and operation over the entire operating temperature range or lifetime. -
Page 3: Safety Precautions
KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit Safety precautions Safety precautions Note: Please note the following warnings regarding the hazards associated with development systems. Table 1 Safety precautions Caution: The evaluation or reference board contains parts and assemblies sensitive to electrostatic discharge (ESD). Electrostatic control precautions are required when installing, testing, servicing or repairing the assembly. -
Page 4: Table Of Contents
KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit Table of contents Table of contents About this document ........................1 Important notice ..........................2 Safety precautions .......................... 3 Table of contents ..........................4 The board at a glance ......................5 Scope of supply ............................6 Block diagram ............................ -
Page 5: The Board At A Glance
KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit 1 The board at a glance The board at a glance The XENSIV™ BGT60UTR11AIP Connected Sensor Kit supports customers in testing sensor-driven IoT products and radar use cases as well as in prototyping. It offers a real-time sensor evaluation with custom configurations and cloud- and radar-based solution output visualization. -
Page 6: Scope Of Supply
KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit 1 The board at a glance The XENSIV™ BGT60UTR11AIP Wing board shown in Figure 3 is based on the XENSIV™ BGT60UTR11AIP 60 GHz radar sensor MMIC with one transmitting and one receiving antenna integrated. The XENSIV™ BGT60UTR11AIP MMIC enables ultra-wide bandwidth FMCW operation. - Page 7 KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit 1 The board at a glance Figure 4 XENSIV™ BGT60UTR11AIP Wing board block diagram A system block diagram showing the shield connected to the CSK rapid IoT baseboard is shown in Figure 4. The interface from the shield to the rapid IoT baseboard includes I2C, digital signals, analog signals and power lines.
-
Page 8: Main Features
1 RGB LED and 2 configurable user buttons on the wing − Form-factor compatibility with Adafruit − CYSBSYSKIT-DEV-01 Rapid IoT Connect Developer Kit (MCU board) • Operates with ModusToolbox™ and Infineon Rapid IoT Connect cloud platform − Board parameters and technical data Table 2 Parameters Parameter... -
Page 9: System Design
Wing board, which has male headers facing downwards to either plug the board directly on the Rapid IoT baseboard or on top of another Wing board such as the Infineon XENSIV™ PAS CO2 Wing board. Figure 6 Table 3 provide a description of the components mounted on the XENSIV™... -
Page 10: Schematics
KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit 2 System design Schematics Figure 7 Oscillator circuit on the XENSIV™ BGT60UTR11AIP Wing board Figure 8 XENSIV™ BGT60UTR11AIP Radar MMIC schematic Figure 9 Adafruit header schematic User guide Revision 1.00 2025-03-18... - Page 11 KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit 2 System design Figure 10 XENSIV™ BGT60UTR11AIP Radar MMIC schematic The user interface on the wing board consists of two mechanical buttons (Figure 11) and three LEDs (Figure 12). Figure 11 Reset (S1) and user button (S2) schematic Figure 12 LEDs schematic Figure 13...
- Page 12 KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit 2 System design Figure 13 Board power selection (S3) schematic Figure 14 shows the voltage regulator circuit to provide stable power supply to the radar sensor. Figure 14 Voltage supply for radar sensor Figure 15 shows the pin assignment of J1 and J2 on the XENSIV™...
-
Page 13: Layout
KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit 2 System design Layout The size of the XENSIV™ BGT60UTR11AIP Radar Wing board is 43 mm (L) x 23 mm (W), as shown in Figure Figure 16 PCB layout of XENSIV™ BGT6UTR11AIP Radar Wing board Bill of materials The complete bill of materials (BOM) is available on the Design Support section of the KIT_CSK_BGT60UTR11AIP... - Page 14 KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit 2 System design Ref designator Description Manufacturer Manufacturer Footprint DIR1, IR2, Generic Surface Mount TP TP SMD RD1V8, DR3V3, with 1 mm diameter TP2, TP3, TP5, TP6, TP7, TP8, TP9, TP10, TP11, P12, TP13, P14, TP15, P16 Header, 12-pin, pitch 2.54 Molex...
-
Page 15: Connector Details
Manufacturer Manufacturer Footprint Slide switch SPDT surface Würth SW-SMD- 450404015514 mount Elektronik 450404015514 60 GHz Radar Sensor with Infineon BGT60UTR11AI BGT60UTR11AI Antennas in Package PXUMA1 LDO Regulator, Ultra-Low ON Semi ONSEMI-SMD- NCP163AMX18 Noise, High PSRR, RF and CASE 711AJ 0TBG... - Page 16 KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit 2 System design Table 5 Adafruit Feather-compatible pinout Header Primary PSOC™ 6 MCU Adafruit Adafruit Feather- Details mapping onboard pin (Rapid IoT Feather- compatible mapping compatible (BGT60UTR11AIP function baseboard) mapping (Rapid Radar Wing board) IoT baseboard) J1.1 VBAT –...
- Page 17 KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit 2 System design Header Primary PSOC™ 6 MCU Adafruit Adafruit Feather- Details mapping onboard pin (Rapid IoT Feather- compatible mapping compatible (BGT60UTR11AIP function baseboard) mapping (Rapid Radar Wing board) IoT baseboard) J2.11 SPI Clock P5_2 SPI_CLK_Feather SPI clock J2.12...
-
Page 18: References
XENSIV™ Connected Sensor Kit References References [1] Infineon Technologies AG. BGT60UTR11AIP MMIC datasheet; Available online [2] Infineon Technologies AG: Getting started with PSOC™ 6 MCU on ModusToolbox™ application note; Available online [3] Infineon Technologies AG: Code examples for ModusToolbox™; Available online User guide Revision 1.00... -
Page 19: Glossary
KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit Glossary Glossary board support package (BSP) connected sensor kit (CSK) FMCW frequency modulated continuous wave (FMCW) finite state machine (FSM) GPIO general-purpose input/output (GPIO) hardware (HW) I²C inter-integrated circuit (I²C) internet of things (IoT) light-emitting diode (LED) photoacoustic spectroscopy (PAS) printed circuit board (PCB) serial peripheral interface (SPI) -
Page 20: Revision History
KIT_CSK_BGT60UTR11AIP XENSIV™ Connected Sensor Kit Revision history Revision history Document Date Description of changes revision 1.00 2025-03-18 Initial release User guide Revision 1.00 2025-03-18... -
Page 21: Disclaimer
All referenced product or service names and trademarks are the property of their respective owners. PSOC™, formerly known as PSoC™, is a trademark of Infineon Technologies. Any references to PSoC™ in this document or others shall be deemed to refer to PSOC™.
Need help?
Do you have a question about the KIT CSK BGT60UTR11AIP and is the answer not in the manual?
Questions and answers