Related Manuals for Sencor STT 212U
Summary of Contents for Sencor STT 212U
- Page 1 STT 212U User Manual TURNTABLE Copyright © 2025, Fast ČR, a. s. Revision 03/2025...
-
Page 3: Table Of Contents
Contents Contents Important safety instructions .......................2 Device functions ..........................7 Device ..............................8 Remote controller .......................... 9 4.1. Inserting battery ........................9 4.2. Description of buttons ......................9 Control ............................... 11 5.1. Installation ..........................11 5.2. Turning on and off ........................ 11 5.3. -
Page 4: Important Safety Instructions
Important safety instructions 1. Important safety instructions WARNING: WHEN YOU REMOVE THE COVER WARNING OF THE DEVICE (OR ITS REAR PART) THERE IS A RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS PRODUCT TO THERE ARE NO PARTS INSIDE THE DEVICE RAIN AND INCREASED HUMUDITY THAT COULD BE REPAIRED BY THE USER. - Page 5 Important safety instructions Ventilation Slots and openings on the cover of the device provide ventilation. They protect the unit from overheating and ensure its proper functioning. Do not cover or block these openings. Do not block ventilation openings by placing the product on a bed, sofa, rug or similar surface.
- Page 6 Important safety instructions 12. Accessories Do not place the device on unstable carts, stands, tripods, shelves or small tables. In case of fall it may cause an injury to a child or an adult and damage to the device. Use only carts, stands, tripods and tables recommended by the manufacturer or supplied as accessories with the product.
- Page 7 Important safety instructions If there are significant changes in the functioning of the device – in such a case it is necessary to seek out help of a qualified service centre. 20. Repairs Do not attempt to repair the device yourself. Opening the cover may expose you to injury from electric shock and other dangers.
- Page 8 Important safety instructions – If there is an electrolyte leakage from the batteries, have the remote control serviced by an authorized technician. WARNING: TO PRE VENT RISK OF FIRE OR ELECTRIC SHOCK, DO NOT E XPOSE THE DE VICE TO R AIN OR MOISTURE. WARNING: THE BAT TERIES MUST NOT BE E XPOSED TO E XCESSIVE HEAT, FOR E X AMPLE SUNLIGHT, FIRE, ETC.
-
Page 9: Device Functions
Device functions 2. Device functions • Turntable with selectable speeds 33/45/78 rev./min. • Turntable with automatic/manual stop • Belt-driven system • Direct recording to USB /SD card from the record player, FM radio and AUX IN input • AUX IN input for connecting other devices (e.g. CD and MP3 players) •... -
Page 10: Device
Device 3. Device Remote control sensor 16) Play/Pause button u (T-SCAN) Standby mode indicator 17) Stop button x Dust cover 18) Skip back button . Volume control/switch 19) Skip forward button > 5) Function – switching sources 20) Removable centre adapter 6) Sleep –... -
Page 11: Remote Controller
Remote controller 4. Remote controller 4.1. Inserting battery Infrared transmitter requires one piece of CR2025 lithium battery to operate. Insert it as shown on the underside of the remote control. 4.2. Description of buttons Standby: switching between standby and operating mode. Preset/Album DN: performs the same function as “album down / preset down”... - Page 12 Remote controller 14) > (skip up): performs the same function as “> skip forward (19)” on the device. In addition, it can be used to search for radio frequencies in the tuning mode. 15) Volume +/-: volume level control. To set press repeatedly. 10 EN Copyright ©...
-
Page 13: Control
Control 5. Control 5.1. Installation • Unpack all parts and remove protective material. • Before connecting the device to the power supply, check the voltage and all other connections. • Do not block air vents and make sure that there is several centimetres space around the unit to ensure ventilation. -
Page 14: Tuning Fm Radio
Control 5.5. Tuning FM radio Press function (5) to select radio mode. To find a station press and hold skip forward (19) or skip back (18) for period of 1–2 seconds and then releasing it. The device will automatically search in the radio bandwidth, and stops after finding a station. -
Page 15: Turntable And Recording
Control Listening to newly recorded track: Press function (5) to select USB or SD mode. – Press skip forward (19) or skip back (18) to select the newly recorded track. – – A newly recorded track is on a USB drive / memory card always saved as last. -
Page 16: Connector Aux In And Recording
Control Note: If some records have the final groove molded out of reach for automatic stop of this unit, the playback will stop before end of the last song. In this event turn the switch of the automatic stop (22) in the “off” position (off). The record will play to the end, but does not stop automatically (to stop the platter from turning, turn the device off using switch (4) or put the automatic stop switch (22) back to the “on”... -
Page 17: Playback Of Mp3/Wma Songs Using Usb Memory Medium Or Memory Card
Control Press function (5) to select USB or SD mode. – Press skip forward (19) or skip back (18) to select newly coded track. – – Newly coded track is in the USB/Memory card always saved as last. Note: – Recording speed is 1:1, according to the real time playback of an external audio device. -
Page 18: Removal Of Usb Device/Memory Card
This unit has Bluetooth receiver to play music from your BT device (mobile phone). Select BT source by repeated push of Function key. Switch ON Bluetooth on your phone and select “STT 212U” for pairing. Once paired successfully a speaker sound confirms it. -
Page 19: Technical Specifications
0.3W The above data may change without prior notice. The original version is in Czech. Manufacturer address: FAST ČR, a.s., U Sanitasu 1621, 251 01 Říčany info@sencor.com EN 17 Copyright © 2019, Fast ČR, a. s. Revision 05/2019 Copyright © 2025, Fast ČR, a. s. - Page 20 The product meets EU requirements. Hereby, FAST ČR a.s. declares that the radio equipment type STT 212U is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.sencor.eu.
-
Page 21: Warranty Conditions
FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic info@sencor.com Authorized service centers: Visit www.sencor.com for detailed information about authorized service centers. The original version of the instructions is in the Czech language, other language versions are made by the appropriate translation. - Page 22 FAST ČR, a.s., U Sanitasu 1621, Říčany CZ-251 01...
Need help?
Do you have a question about the STT 212U and is the answer not in the manual?
Questions and answers