Table of Contents
Advertisement
S5 Rev 2
21/7/04
1:54 PM
Switch control
›
fi
fl
How to use
1 Ensure the blanket is fitted to the bed
correctly.
2 Plug the power lead into the closest
socket, using an extension lead if needed
to ensure that the lead is not stretched.
Preheating the bed
1 Turn the blanket on by selecting one of
the timer off settings ⁄, ‹ or Â.
2 Move the heat setting on the control
switch to maximum heat, the light
indicator will show a red light to indicate
that the preheat setting has been
selected. Allow approximately 10-20
minutes for a light heat and a further 20-
30 minutes for the blanket to heat the bed
thoroughly, although this time may vary
depending on room temperature.
Page 5
Features
⁄ Illuminated heat setting light
¤ Variable heat levels
‡
‹ Braille markings
¤
› Timer off
fi Timer on
‹
fl Off setting
‡ Power 'on' indicator light
⁄
All night use
1 Select the required timer off setting.
2 Set the heat setting on the control switch
to the low/minimum heat, the light
indicator will show a green light to
indicate that the all night setting has been
selected.
• This setting will provide safe and
comfortable heat to sleep on all night.
• This setting can be used to air the bed.
WARNING: Always ensure that the
heat setting is moved to the OFF
position when you get up the next day.
Braille markings
• Braille markings are located on the back
of the switch to help identify the direction
of the heat level in the dark, or if visually
impaired.
• The highest heat level
pre-heat is identified by 3 raised nodules
mid level by 2 raised nodules
low level (all night) by 1 raised nodule.
5
(Red for preheat level, green for safe
all night level)
(For exact heat preference)
(located on the back of the switch)
(Automatically turns the heat off after
the number of hours selected)
(Automatically turns the heat on in 3
hours time)
Advertisement
Table of Contents
