Morphy Richards IB75300 Instructions Manual page 4

S5 Rev 2 21/7/04 1:54 PM
Overblanket
• Your overblanket should as the name
suggests, be used ABOVE not
underneath the occupant of the bed. It
can be used either under a duvet or one
or two blanket covers. It can also be
used inside the duvet cover.
Under the duvet cover
1 The bed should be made as normal, with
a bottom sheet covering the mattress
then a top sheet above the bed
occupant, then the heated overblanket,
then the duvet or covers
(see diagram A).
2 Fold the top sheet over top edge of the
blanket and tuck in sides.
WARNING: Do not fold over the top
part of the blanket or tuck in any wired
parts.
A
Heated overblanket
Page 4
Inside the duvet cover
The overblanket is designed to enable it
to be placed inside the duvet cover with a
duvet of up to 12.5 tog if desired.
1 It should be carefully inserted into the
duvet cover BELOW the duvet, ensuring
that it is spread smoothly and that there
are no folds in the overblanket
(see diagram B).
2 Securing loops are provided along the
top edge of the overblanket. These can
be used to sew it to the duvet with a
simple stitch to help prevent the blanket
from moving inside the duvet cover.
• If the duvet cover is smaller than normal
size it is permissable for the side edges
of the overblanket (no more than 3" or
75mm) to be folded over to allow it to fit
inside the duvet cover.
WARNING: On no account should
the central, heated area of the blanket
be folded for this purpose. The electric
lead should be located at the open end
of the duvet cover at the bottom of the
bed.
B
4
Heated overblanket