Dell Studio XPS 0KM04CA00 Setup Manual page 43

NOTE: If you see a message stating that no
diagnostics utility partition has been found,
run the Dell Diagnostics from the Drivers
and Utilities disc.
If PSA is invoked:
a. The PSA starts running tests.
b. If the PSA completes successfully, the
following message is displayed: "No
problems have been found
with this system so far.
Do you want to run the
remaining memory tests? This
will take about 30 minutes
or more. Do you want to
continue? (Recommended)."
c. If you are experiencing memory issues
press <y>, otherwise press <n>. The
following message is displayed:
"Booting Dell Diagnostic
Utility Partition. Press any
key to continue."
d. Press any key to go to the
Option window.
If PSA is not invoked:
Press any key to start the Dell Diagnostics from
the diagnostics utility partition on your hard
drive and go to the Choose An Option window.
4. Select the test you want to run.
5. If a problem is encountered during a test,
a message appears with an error code and
a description of the problem. Write down
the error code and problem description
and contact Dell (see "Contacting Dell" on
page 57).
Using Support Tools
Choose An
41