Related Manuals for DEL EQUINOX AZTECK E-1.0
Summary of Contents for DEL EQUINOX AZTECK E-1.0
- Page 1 INSTALL ATION GUIDE INSTALLATION / MAINTENANCE / SAFETY ADVICE 4-SEASON SAFETY COVER ÉQUINOX AZTECK E-1.0...
-
Page 2: Table Of Contents
CONTENTS PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE Please read this manual carefully to help you understand all of the information and to ensure safe installation, use and servicing. We are not held liable for any damage arising due to a failure to respect the instructions set out in this manual. -
Page 3: Description
DESCRIPTION COMPONENTS PROVIDED Pump 580g/m2 PVC fabric mast + crank + winding strap + bungee cords... -
Page 4: Tools Required For Assembly
DESCRIPTION TOOLS REQUIRED FOR ASSEMBLY Meter Allen key n°3 Key n°8 Cutter Decameter PACKING LIST ASSEMBLY 1 package Package size : 0.80 x 0.60 x 0.40 m 2 persons Weight in kg : 30 to 50 Kg. Optional: roll-up pole + valance Package size : 2.50 x 0.30 x 0.30 m 1 hour Weight in kg : 15Kg... -
Page 5: Information
INFORMATION TO ENSURE THAT YOUR ROOF COMPLIES WITH THE NF P90-308 STANDARD The water level must be maintained at its normal level at all times. between 7 and 15 cm The pool must be fitted with a water level regulator. The drainage pump must be installed on the cover in case of rain. -
Page 6: Installation
INSTALLATION INSTALLING THE COVER 1 - Place the cover across the width of the pool on the roll-up side (opposite the tensioning catch). CAUTION : the tensioning pawl must be above the cover. 2 - Unfold the cover over the pool to give an even overhang on all 4 sides. CAUTION : Do not stretch the cover;... - Page 7 INSTALLATION 3 - Tension the rope using the hooks 4 - When tensioning for the first time, adjust the rope size if necessary. Loosen the rope clamp. Adjust the rope length, screw the rope clamp back on and retighten the locking knot.
- Page 8 INSTALLATION WINDING MAST Mast assembly between 10 and 15 cm a and b identical 45 cm minimum Installation of bungee cords and roll-up strap The furling strap must be in the centre of the mast Fit the end cap into the groove on the axle.
-
Page 9: Pool Opening
APPLICATION POOL OPENING 1- Loosen the rope by moving the pawl to the "open" position. 2- Remove the rope from all the hooks. 3- Position the roll-up strap in the centre of the cover 4- Roll up the blanket using the crank or steering wheel. 9 9 9... - Page 10 APPLICATION POOL CLOSURE The person carrying out the operation must ensure that there are no bathers in the pool and always have a view of the pool during the opening and closing operations. It is imperative to open or close the cover completely, without ever leaving it in an inter- mediate position".
- Page 11 APPLICATION 2 - Attach all the hooks to the canvas rope. 3 - Tighten with the ratchet. 4- Putting the drainage pump in place. - For electrical safety reasons, the pump transformer must be at least 2 m from the pool and the mains plug at least 3.5 m (C15-100 electrical standard).
-
Page 12: Servicing & Maintenance
SERVICING/MAINTENANCE During any intervention, the technician must wear PPE (personal protective equip- ment): gloves, goggles, mat, etc… WATER LEVEL IN POOL • In order to ensure maximum safety and correct operation of the rewinder, always check that the water level in the pool remains constant and complies with the manufacturer’s requirements (for greater comfort, use an overflow and a water level regulator). - Page 13 SERVICING/MAINTENANCE SERVICING (customer’s responsibility) • Carry out a deep clean of the cover twice per year (the first time in the year it is used and prior to Wintering). This is even more important if the water in the pool is limestone.
- Page 14 SERVICING/MAINTENANCE MAINTENANCE (ONCE PER YEAR MINIMUM) • All maintenance work must be carried out by a professional, who will contact the manufacturer if necessary (contact details at the back of this document). • This product does not have any wear parts requiring replacement. However, if you notice that certain parts are deteriorating, please ensure that they are replaced.
-
Page 15: Wintering
SERVICING/MAINTENANCE WINTERING • Position the cover in the closed position and keep the water level constant in accordance with the manufacturer's recommendations. Between 7 and 15 cm • During the winter season, in the event of snowfall, it is essential to remove the snow from the cover using a brush with a telescopic handle to avoid deforming the crossbars. -
Page 16: Safety Advice
SAFETY ADVICE Please read the recommendations set out below with care. WARNING Swimming pools can represent a serious danger for your children. Drowning can happen very quickly. Children who are close to a swimming pool need to be watched constantly and actively, even if they know how to swim. - Page 17 SAFETY ADVICE • This section is by no means a replacement for common sense or individual responsibility. Its aim is not to replace the vigilance of parents and/or responsible adults, who remain the essential factor in ensuring the protection of young children. •...
-
Page 18: Recycling
RECYCLING PACKAGING Dispose of the packaging in line with current rules and regulations. END OF LIFECYCLE • Do not put your scrapped equipment or used batteries in with unsorted household waste. • You are responsible for disposing of all of your waste, in particular electrical and electronic equipment by taking it to a collection point where recycling and valorisation are carried out. -
Page 19: Regulations
REGULATIONS STANDARD • This cover complies with standard NF P90-308. WARRANTY CONDITION log on to www.del-piscine.fr to consult all our guarantees. https://www.del-piscine.fr/rechercher-une-garantie... - Page 20 SAS AQUALUX ZAC DE LA MASSANE 287 AVENUE DE LA MASSANE 13210 ST RÉMY DE PROVENCE - FRANCE +33 (0)9 70 72 5000 / INFO.FR@ CF.GROUP STAMP A brand by CF group...
Need help?
Do you have a question about the EQUINOX AZTECK E-1.0 and is the answer not in the manual?
Questions and answers