Subscribe to Our Youtube Channel
Related Manuals for Trustech KPT-2206D
Summary of Contents for Trustech KPT-2206D
- Page 1 USER MANUAL Ceramic Heater MODEL: KPT-2206D PLEASE READ AND SAVE FOR FUTURE REFERENCE...
-
Page 2: Important Instructions
IMPORTANT INSTRUCTIONS: To ensure the best performance of your heater, please read and save the following instructions. WHEN USING ELECTRICAL APPLIANCES, BASIC PRECUATIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSON, INCLUDING THE FOLLOWING: Read all instructions before using this heater. - Page 3 opening as this may cause electric shock or fire or damage to the heater. To prevent the possible fire, DO NOT block the air intakes or exhaust in ● any manner. DO NOT use this heater on any soft surfaces, like the bed, where openings may become blocked.
- Page 4 OPERATING INSTRUCTIONS: Before inserting the plug into an electrical outlet, make sure that the electrical supply in your area matches that on the rating label on the unit. When plugged in, turn on the Main power switch at the back of the unit. ...
-
Page 5: Remote Control
seconds of cool air and then turn off. Warning: The heater will remain hot for some time after it is turned off;,please do not touch the grids and other hot areas. REMOTE CONTROL The remote control uses on button cell battery, type CR2025(3V).To remove the battery carriage , please use your thumb to squeeze the release tab to the right and then pull the carriage out. -
Page 6: Overheat Protection
OVERHEAT PROTECTION This heater is protected with an overheat protection that switches off the appliance automatically in case of overheat, e.g. due to the total or partial obstruction of the grids. In this case, unplug the appliance, wait about 30 minutes for it to cool and remove the object which is obstructing the grids. -
Page 7: Warranty
ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”). If a defect arises and a valid claim is received within the Warranty Period, at its option, TRUSTECH will either 1) repair the defect at no charge, using new or refurbished replacement... - Page 8 CONTACT US Thank you for choosing TRUSTECH product. For any customer product questions or honor your warranty, please contact us at Support@trustechproducts.com. Our usual response time is within 12 hours!
Need help?
Do you have a question about the KPT-2206D and is the answer not in the manual?
Questions and answers
My KPT-2206D turns on but is not heating anymore.
If your Trustech KPT-2206D is turning on but not heating, possible reasons include:
1. Overheat Protection Activated: If the air intake or exhaust is blocked, the heater may shut off the heating function. Unplug it, wait 30 minutes, remove any obstruction, then try again.
2. Tip-Over Protection Triggered: If the heater is tilted or not upright, it will stop heating. Place it upright and press the control buttons to reset.
3. Ambient Temperature Too High: If the room is already warm or the heater has run a long time, it may pause heating. Unplug and wait about 30 minutes before restarting.
If the issue continues after these checks, contact customer service.
This answer is automatically generated