Table of Contents
Advertisement
Quick Links
Instruction Manual
PTC Fan Heater
MODEL.: KPT-1606F
Please Keep This User Manual For Future Reference.
NOTE:
1.When you power on the heater, it would be under 'FAN' mode
initially.
2.Under the ECO mode, when the room temperature reaches the set
temperature, the heater will release cool air for 30 seconds to protect
the motor and keep the thermostat.
Advertisement
Table of Contents
Related Manuals for Trustech KPT-1606F
Summary of Contents for Trustech KPT-1606F
- Page 1 Instruction Manual PTC Fan Heater MODEL.: KPT-1606F Please Keep This User Manual For Future Reference. NOTE: 1.When you power on the heater, it would be under ‘FAN’ mode initially. 2.Under the ECO mode, when the room temperature reaches the set temperature, the heater will release cool air for 30 seconds to protect the motor and keep the thermostat.
- Page 2 TABLE CONTENT FUNCTIONAL FEATURES ................2 Features ....................3 Technical Parameters ..................3 Structure ......................3 ..............4 OPERATIONG INSTRUCTION HEATER CONNECTION ................4 CHECK BEFORE USE ................4 FUNCTIONS INSTRUCTION ................5 TROUBLESHOOTING ..................6 READ AND SAVE THESE INSTRUCTIONS ..........7 USAGE ......................7 INTENDED USE ..................7 IMPORTANT INSTURCTION ..............7 MAINTENANCE ....................8 FUNCTIONAL FEATURE This heater was inspired by some customers who would like the flame,...
- Page 3 Additionally, when the room temperature reaches the set temperature, the heater will release cool air for 30 seconds to protect the motor and keep the thermostat. Technical Parameters Model Voltage Frequency Current Power KPT-1606F 120V 60Hz 12.5A 1500W Structure...
- Page 4 3D Flame Base Power switch (behind) OPERATIONG INSTRUCTION HEATER CONNECTION Insert the plug into a 120V~60Hz socket. CHECK BEFORE USE Attentively, you should make sure that the ‘Power Switch’ on the motor the control panel with your finger or BACK was turned on. Then, touching use the remote control.
- Page 5 FUNCTIONS INSTRUCTION 1. FAN FUCTION: After you power on the heater, it should be under the ‘FAN’ mode. You should click the ‘MODE’ to change to the heating function. 2.HEATING FUCTIONS: Clicking the ‘MODE’ to change the heating functions: Low Heat (1000 watts) ...
- Page 6 4. OSC.: Control the oscillating feature to get wide warm. 5. 3D FLAME: control the power of the flame. The flame will light up automatically after the heater is power on. 6. SHUT DOWN: After 3 minutes of no operation, the screen goes out. When you power off the heater, it will release cool air for 30 seconds to cool down the motor to get the overheat protection.
- Page 7 READ AND SAVE THESE INSTRUCTIONS USAGE Always operate the heater in the upright position following all instructions and recommendations listed in this manual. INTENDED USE This product is intended for indoor residential and office use only, not for industrial or other commercial applications. Use only with electrical wiring that is in good working order and that meets applicable codes and ordinances.
- Page 8 components. 7. Please unplug the heater if it is not used for a long time. 8. The heater should be placed vertically and smoothly, and it is strictly prohibited to tilt upside down. 9. WARNING: If the power cord is damaged, it must be replaced by the manufacturer or its maintenance department or similar professional personnel to avoid danger.
Need help?
Do you have a question about the KPT-1606F and is the answer not in the manual?
Questions and answers