Digital Clock Function; Operation Of Radio - Morphy Richards IB29106 Operating Instructions Manual

Operating the unit (Power/standby)
1 When you first plug the unit into the AC outlet, the unit will be in STANDBY
mode. You can press the POWER button on the unit (or on the remote
control) to switch the unit ON and OFF. Pull the AC plug out of the wall socket
if you want to switch off completely.
• When the power is 'on' the entire digital display will be illuminated with a blue
backlight. This indicates the system is switched 'on'.
2 Press POWER button to switch off the unit.

Digital clock function

Your micro system has a built-in digital clock which is displayed when the unit is
off. To the set the correct time, follow this procedure:
1 Press the ON/OFF button to the 'off' position. The unit must still be connected
to the mains supply.
2 Press and hold the CLOCK / ADJ button until '12H' or '24H' is flashing.
3 Press NEXT / UP or BACK / DOWN button to select 12/24 hour format.
4 Press CLOCK / ADJ button once. The time will be displayed with the hour
digits flashing.
5 Press NEXT / UP or BACK / DOWN button to adjust the hour.
6 Press CLOCK / ADJ button once. The minute digits should be flashing.
7 Press NEXT / UP or BACK / DOWN button to adjust the minutes.
8 Press CLOCK / ADJ button to set the settings to the new time.

Operation of radio

1 Press the POWER ON/OFF button to switch on the unit.
2 Press the TUNER button to select the radio.
3 Press the BAND button to switch between FM and MW.
• For FM stations, fully extend the wire FM aerial and adjust its position to
improve radio reception.
9