Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Morphy Richards IB29106
Summary of Contents for Morphy Richards IB29106
- Page 1 Micro system with cd player and built in subwoofer 29106 OPERATING INSTRUCTIONS...
- Page 2 Illustration 9 10 11 12...
-
Page 3: Display Illustration
Display illustration Digital multi-function display 14 Cd stop / radio band button Remote control sensor 15 Cd play/pause button Speaker out sockets (left & right) 16 Cd next / tune-up button Headphone jack 17 Cd back / tune down button FM wire aerial 18 Tuner select button (radio mode) Desk stand for main unit... -
Page 4: Remote Control Functions
Remote control functions • POWER ON/OFF button to switch the unit on and off. • CD / TUNER button to select ‘cd’ or ‘tuner’ function. • SUPER BASS button to switch ‘on’ or ‘off’ super bass function. • EQ button to select preset equaliser function. •... - Page 5 Fixing the base to the main unit Place the base under the main unit. Slide the base from right to left (see diagram below). Stop when the arrows are aligned (see diagram). The base is now locked to the main unit.
- Page 6 Assembly of a wall mounted unit The base of the main unit can be used as a template for fixing the two screws on the wall. • The two guide holes (see diagram) will help you to obtain exact locations of the screws.
-
Page 7: Connection Of Speaker Boxes
Connection of speaker boxes Unwrap the speaker cords from both speaker boxes. Insert the ‘red wire’ of the left speaker box into the ‘red’ (+) speaker connector behind the main unit, which has the ‘L’ inidication (under the speaker connector). Insert the ‘black wire’... -
Page 8: Electrical Requirements
Electrical requirements Check the voltage on the rating plate of your CD micro system corresponds with your house electricity supply which must be A.C. (alternating current). If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted. -
Page 9: Digital Clock Function
Operating the unit (Power/standby) When you first plug the unit into the AC outlet, the unit will be in STANDBY mode. You can press the POWER button on the unit (or on the remote control) to switch the unit ON and OFF. Pull the AC plug out of the wall socket if you want to switch off completely. - Page 10 Manual frequency adjustment scan mode Push and immediately release the UP / DOWN button. To scan manually adjust the radio frequency up or down by 1 step increments. • The radios digital display will indicate the exact frequency at each steps position. When a desired frequency or station is reached, it can be saved into one of the ‘memory positions’, see ‘Radio memory’...
-
Page 11: Electronic Volume Control
Electronic volume control • This unit uses an electronic volume control. To increase or decrease the volume of the unit, press the VOLUME UP or VOLUME DOWN buttons. Release the buttons when the desired volume is reached. • When adjusting the volume, the display will indicate the sound level in decibels. (dB) ‘OdB’... - Page 12 Loading and unloading of Cds The set must be switched ‘on’ and in ‘cd mode’, by pressing CD SELECT button. Press the door OPEN / CLOSE button once to open the door. Place a cd into the compartment with the label-side facing outwards towards you. Press the door OPEN / CLOSE button to close the cd door.
-
Page 13: Programming The Cd Player
Programming the cd player • The cd player can be programmed to play any sequence of upto 20 tracks as desired. Always press the STOP button before starting the programming. Press the MEMORY button once, the display will show a memory symbol flashing. -
Page 14: Sleep Function
Sleep function • This function allows you to listen to the radio or cd player while you fall asleep. Press the SLEEP button (on remote control) repeatedly to choose the length of time, the music should play while you fall asleep. •... - Page 15 Snooze Press the SNOOZE button on the remote to give 5 extra minutes. Snooze can be turned off by switching off the POWER button. Automatic ‘power on’ timer (alarm clock function) • This unit has a timer function to enable you to program the unit automatically to switch on at pre-set times.
-
Page 16: Compact Disc
Compact disc Always use compact discs bearing the mark as shown. Notes on handling discs: When removing the disc from its storage case and loading it. Do not touch the reflective recorded surface. Do not stick paper or write anything on the surface. Do not bend the disc. - Page 17 Cleaning a disc: Should the disc become soiled, wipe off dust, dirt and fingerprints with a soft cloth. The disc should be cleaned from the centre to the edge. FROM THE CENTRE TO THE EDGE CORRECT INCORRECT Never use benzene, thinners, record cleaner fluid or anti static spray. Be sure to close the CD door so the lens is not contaminated by dust.
-
Page 18: Warning Labels
Warning labels WARNING: to reduce the risk of an electric shock, do not expose this appliance to rain or moisture. ATTENTION: To reduce the risk of an electric shock, do not remove the cover. There are no user serviceable parts inside the unit. -
Page 19: Technical Specification
Technical specification AC power supply 230V 50Hz AC power consumption Subwoofer power Back-up batteries 6V (AA size/UM3/LR6 x 4) Batteries not included Remote control unit 3V (AAA size/UM4/ x 2) Batteries not included Speaker 4” is woofer + 2” x 2 tweeter Speaker capacity power 10W x 2 (4 Ohm) Amplifier max power... - Page 20 Guarantee Morphy Richards products are manufactured to internationally accepted quality standards. In addition to your statutory rights, Morphy Richards guarantee your product to be free from manufacturing and component defects for a period of TWO YEARS from date of purchase.