Morphy Richards IB29106 Operating Instructions Manual page 10

Manual frequency adjustment scan mode
1 Push and immediately release the UP / DOWN button. To scan manually adjust
the radio frequency up or down by 1 step increments.
• The radios digital display will indicate the exact frequency at each steps position.
2 When a desired frequency or station is reached, it can be saved into one of the
'memory positions', see 'Radio memory' section.
3 Press the VOLUME UP or DOWN buttons to adjust volume to the desired level.
4 To turn off the radio press the POWER button once.
Automatic frequency adjustment (seek mode)
1 Push and hold for 2 seconds the UP or DOWN button to search. This automati-
cally adjusts the radio frequency up or down to the next available radio station.
2 The radio digital display will indicate the exact frequency of the next station that
is found.
3 When a desired station is reached, it can be saved into one of the 'memory
positions', see 'Radio memory' section.
Radio memory station pre-set storage
• At any time, the currently displayed station or frequency can be stored into one
of the memory positions.
1 Press the MEMORY button once.
2 Press MEM UP button to select to the desired memory position.
• There are 10 memory positions for each radio band.
3 Press the MEMORY button once to save the selected station into the selected
memory position.
4 To recall any saved memory pre-sets, simply press the MEM UP button
repeatedly. This will advance the memory position in the display from 1 upwards
to 10 (1-2-3-10) at each position. The station that was previously stored in that
position will be recalled.
5 To clear the memory of any particular position, simply save a new station to the
same position.
10