Table of Contents
Advertisement
Electrical requirements
Check the voltage on the rating plate of your CD microsystem corresponds with
your house electricity supply which must be A.C. (alternating current).
If the socket outlets in your home are not suitable for the plug supplied with
this appliance the plug should be removed and the appropriate one fitted.
IMPORTANT : THE PLUG IF SEVERED FROM THE MAINS LEAD MUST BE
DESTROYED AS A PLUG WITH A BARED FLEXIBLE CORD IS
HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET.
Should the fuse in the 13 amp plug require changing a 3 amp BS1362 fuse
must be fitted.
Putting batteries into the remote control
Press down the compartment cover, and slide the cover off to open the compartment.
Place the two batteries (UM4), (AAA), (R6) batteries (not supplied) in the remote control
according to the polarity markings (" + " and " -- ") inside the compartment and on the
batteries.
Place the cover over the compartment, press down lightly, and push it upwards until it
snaps on.
** BATTERIES NOT INCLUDED **
If the unit is not to be used for a prolonged period, remove the batteries to
avoid battery leakage.
In the interests of environmental safety : dispose of batteries safely.
5
Advertisement
Table of Contents
