Table of Contents
Advertisement
Quick Links
SCAN QR CODE FOR THE ELECTRONIC MANUAL
Manufacturer: CHONGQING QIULONG TECHNOLOGY CO., LTD
Address: CHONGQING QIULONG TECHNOLOGY CO., LTD
No.259, Shimian Village, Qiezixi Street, Dadukou District,
Chongqing City, China
Post Code: 400082 Tel:+86-23-68905603
Version: Y029A-EN-V1.1
Issue Date:2025.2.10
Please read this manual carefully before riding, and do not use electric motorcycles until you understand their characteristics.
Please keep this manual properly. This manual contains the most current product information available at the time of printing, your motorcycle
may look and setup differently from the information supplied in this owner's manual.For the latest function introduction and safety guidelines,
please visit our website www.sur-ron.com to view the electronic manual or go to the official online forum to communicate with other users.
LIGHT BEE X
ELECTRIC
MOTORCYCLES
OWNER'S MANUAL
Advertisement
Table of Contents
Troubleshooting
Subscribe to Our Youtube Channel
Related Manuals for Surron LIGHT BEE X
Summary of Contents for Surron LIGHT BEE X
- Page 1 SCAN QR CODE FOR THE ELECTRONIC MANUAL LIGHT BEE X ELECTRIC MOTORCYCLES OWNER’S MANUAL Manufacturer: CHONGQING QIULONG TECHNOLOGY CO., LTD Post Code: 400082 Tel:+86-23-68905603 Please read this manual carefully before riding, and do not use electric motorcycles until you understand their characteristics.
-
Page 2: Table Of Contents
This manual covers the following motorcycle Introduction ..............Important Notice . - Page 3 Feature Introduction Power Management ............6 .1 .
- Page 4 1 0 .1 4 Period of Warranty for Surron Motorcycle .........
-
Page 5: Introduction
Important Notice Transporting Congratulations on your decision to purchase a Surron electric motorcycle, we welcome you to the It is highly recommended that the Light Bee is firmly secured on the transport frame using ratchet straps community of Surron motorcycle riders. -
Page 6: Safety Information
Modifying a Light Bee electric motorcycle may Before operating a Light Bee electric motorcycle, make it unsafe and may cause serious injury. make sure you are legally qualified to ride an Surron is not responsible for any unauthorized electric motorcycle. modifications. - Page 7 Safety Information Safety Information CAUTION Only charge the Light Bee electric motorcycle ‘s battery pack with the original or manufacturer approved charger. The battery pack does not benefit from deep discharging. To maximize battery life, charge the battery pack immediately after each ride.
-
Page 8: Location Of Important Labels
Safety Information Safety Information Location of Important Labels VIN Label A Controller Label High Voltage Battery pack Warning Label Warning Label Motor Serial Number A Vehicle Nameplate A Controller Torque Label... - Page 9 Safety Information Safety Information VIN Label VIN Label 请至虬龙官方网站-下载中心，下载APP安装并绑定设 备使用。 虬龙管家 SIM Label 扫描此二维码 进入下载中心 流量卡第一年免费，第二年起需付费使用。请您在到 期之前完成充值，以免停机。您可以在天猫/京东平台 搜索「虬龙旗舰店」，联系客服充值。...
-
Page 10: Functional Part Overview
Functional Part Overview Functional Part Overview A.Rear Brake Lever F.Key Switch For description and operation, please refer to For description and operation, please refer to "Feature Introduction", on page 6.1. "Starting and Operating" on page 7.4. B.Left Combination Switch G.USB Port For description and operation, please refer to 5V 2.4A Standard USB-A port. - Page 11 Functional Part Overview Functional Part Overview A. Headlight F. Side Stand For headlight replacement,Please refer to"Mainte- The side stand supports the motorcycle when nance" on page 10.14. parked. The key switch should be in the OFF position when parked. B. Battery Charging Port For description and operation, Please refer to CAUTION "Power Management"...
- Page 12 Functional Part Overview Functional Part Overview A. Rear Shock Absorber For description and operation, please refer to "Starting and Operating" on page 7.9. B. Battery Compartment Lock For description and operation, please refer to "Starting and Operating" on page 7.5. C.
-
Page 13: Display And Indicator
Display and Indicator Display and Indicator Dashboard Overview A. Speedometer The speedometer is digital display in either kilometers per hour (km/h) or miles per hour (mph). For description and operation, please refer to "Function Setting" on page 5.1. B. Maximum Speed When "MAX"... -
Page 14: Function Setting
Function Settings Function Settings Switching between total mileage and trip Setting the Mode of System Function mileage: By factory default setting, the regenerative Speed When the dashboard is powered on and the braking is set at medium level and the brake km/h Display Unit speed is zero, short press the A bottom to switch... -
Page 15: Feature Introduction
Function Settings Feature Introduction Handlebar Controls operation: 5 short and 1 long, indicator flashes The specific functions that can be set are (By combining of pulls on the brake lever): 12 times. To set to normal mode again, opera- tion: 5 short and 1 long, indicator flashes 11 ①... -
Page 16: Battery Pack Removal
Feature Introduction Feature Introduction Riding Mode Switch Battery Pack Removal Battery Pack Installation A. Sport Mode: When in Sport mode, the motorcy- cle has a strong explosive force, which is suitable for non-paved roads such as offroad tracks and trails. It is recommended to use this mode after becoming familiar with the motorcycle. -
Page 17: Battery Bottom Buffer Installation
Feature Introduction Feature Introduction Battery Bottom Buffer Installation Charger WARNING Remove the battery pack. For description and 1. Charger port direction: Charger port B has the Before removal and installation of the operation, please refer to page “Battery Pack function of preventing misoperation, and the gap battery pack on the Light Bee motorcycle, Removal”... -
Page 18: Starting And Operating
Starting and Operating Starting and Operating Pre-ride Check Brake System WARNING Before operating the Light Bee electric motorcycle, Pull the brake lever and push the motorcycle to Improper tire pressure is a common reason please check the following items to ensure that see if the front and rear wheels can be fully the motorcycle is in operational condition: that causes tire failure, and may cause... -
Page 19: Key Switch
Starting and Operating Starting and Operating Electrical System Key Switch ON Position This is a two-position switch located on the USB Check whether the headlight and tail light are functioning properly. This position is to turn on the Light Bee electric charging port holder. -
Page 20: Battery Compartment Lock
Starting and Operating Starting and Operating Battery Compartment Lock Riding Light Bee Electric WARNING NOTE Motorcycle This is a two-position self-return switch located on Gradually increase the braking force could After each ride, please check the remain- the right of the frame body. The functions are as Starting follows: stop the Light Bee electric motorcycle... -
Page 21: Front Fork Adjustment
Starting and Operating Starting and Operating Front Fork Adjustment Rebound Damping CAUTION NOTE Adjust the rebound damping by turning the knob The preload and rebound damping should Please check and calibrate the air cham- CAUTION B at the top of the right front fork. The symbol "+" be adjusted properly according to the ber pressure regularly. -
Page 22: Rear Shock Adjustment
Starting and Operating Starting and Operating Rear Shock Adjustment Rebound Damping NOTE Adjust the rebound damping by turning the knob The appearance of rear shock may vary in CAUTION A at the bottom right of the rear shock. The symbol different brands, please refer to the actual For any adjustable knob to be adjusted to "+"... -
Page 23: Power Management
Starting and Operating Power Management Battery Pack once when the battery level is less than 20%, so as CAUTION NOTE to avoid excessive discharge of the battery pack, The Light Bee electric motorcycle uses high-per- It is NOT recommended to adjust the preload The appearance of rear shock may vary in affecting performance and causing damage. -
Page 24: Power Supply And Charging
Power Management Power Management Power Supply and Charging WARNING lf the internal temperature of the battery Before charging, please check whether the grid pack exceeds this value, it can only be Always charge the battery pack in a voltage is within the input voltage range support- charged after natural cooling below 55 well-ventilated environment and keep away ed by the charger. -
Page 25: Power System Management
Contact battery pack, when the battery pack is It is strictly prohibited for users to disassem- by Surron. Users are not allowed to disas- Surron after-sales service or send to charged 6 or when the circuit breaker of ble the motor without permission, otherwise... - Page 26 Power System Management Power System Management WARNING The power system is a 60V high voltage system. During operation, repair and main- tenance of the motorcycle, ensure that the motorcycle and power cables are well isolated.
-
Page 27: Maintenance
Protection Block need attention. If you do not feel performing Tilt Switch the tasks or need assistance, please contact Side Stand Switch your nearby Surron authorized dealer to main- Screw Torque tain your motorcycle. The warranty will be void Check Replace... -
Page 28: Torque Management
Maintenance Maintenance Torque Management Check regularly and tighten the following fasteners on the Light Bee electric motorcycle according to the specified torque. Left Right 10.3 10.4 K L M N... -
Page 29: Battery Pack
CAUTION CAUTION 5-6N.m Hexagon socket head M6*20 Handlebar Ahead Stem 1. Battery packs are lithium-ion systems that 3. Only service agents authorized by Surron 8-10N.m Hexagon socket head M6*16 Controller Installation Screw 20-25N.m Hexagon socket head half-thread L50-M8 Rear Shock Top & Bottom Installation Screw do not require maintenance but need to be are qualified to repair or disassemble the... -
Page 30: Brake System
Maintenance Maintenance Brake System Brake Disc Inspection The brake fluid level can be observed through the CAUTION inspection window B. If the fluid level is lower This section describes how to maintain the brake than one-third of the inspection window B, the Do not splash the brake fluid on the painted system of the Light Bee electric motorcycle, which brake fluid must be added. -
Page 31: Suspension System
Maintenance Maintenance Front & Rear Brake Pad Suspension System The brake pads must be checked at the specified WARNING intervals in the Periodic Maintenance Table, 1. It is recommended to clean the surface of the please refer to page 10.2. Check the remaining The shock absorber contains high-pressure shock absorber immediately after each ride, amount of brake pad visually from the side of the... -
Page 32: Wheels And Tires
Maintenance Maintenance Wheels and Tires Chain WARNING CAUTION Check the wheels and tires for any of the Please refer to the Periodic Maintenance Table on Before each ride, check the tire pressure and 1. When the chain swings up and down following: page 10.2 for the inspection and maintenance of adjust it to an appropriate pressure level. -
Page 33: Light Replacement
Maintenance Maintenance Chain Adjustment Procedure Light Replacement Motorcycle Cleaning When the headlight A/tail light B/ is damaged, 1. Use a sponge or clean soft cloth, neutral deter- 1. After removing the key from the key switch and gent and water to gently clean the motorcycle. please contact the authorized dealer for a turning off... -
Page 34: Long-Term Storage
Maintenance Maintenance Wheel and Tire Cleaning When you are ready to use the Light Bee electric CAUTION CAUTION motorcycle again, please fully charge the battery Avoid using strong acid wheel cleaners. If you use pack to ensure it is restored to its best condition. Improper cleaning can damage motorcy- We recommend that you carefully use the this type of product to clean stubborn dirt, please... -
Page 35: Fuse
Official Parts Fuse Box Light Bee electric motorcycles reguire the use of parts and accessories specified by Surron. You can The fuse box is located under the USB cover. obtain original spare parts for maintenance of your Light Bee electric motorcycle trough your... -
Page 36: Light Bee Electrical Schematic Diagram
Maintenance Maintenance Light Bee Electrical Schematic Diagram 10.19 10.20... -
Page 37: Troubleshooting
Therefore, when used in an environment below 11.1 11.2 authorized Surron dealer at your convenience. If 0°C（32℉） compared to an environment at 25°C there is no dealer in your area, please reach out to 2. Open the battery compartment cover, refer to （77℉）, the Light Bee electric motorcycle may... -
Page 38: Safety Interlock
Troubleshooting Troubleshooting Hot Weather Precautions for Light Bee It is recommended to store the Light Bee electric CAUTION Electric Motorcycle motorcycle in a suitable temperature environ- In high temperature condition, the battery won't ment. Please do not leave the Light Bee electric Light Bee electric motorcycle has high voltage have any performance changes. - Page 39 Troubleshooting Troubleshooting WARNING Light Bee electric motorcycle uses 60V high High Voltage Component Area voltage system. The power system may be too hot to touch after use. Beware of high voltage and high temperatures and obey all the safety rules and regulations on the motorcycle.
-
Page 40: Fault List
Troubleshooting Troubleshooting Error Code & Fault List Error Code Error Description Troubleshooting Error Code Error Description Troubleshooting Running normally Discharging MOS failure Contact manufacturer or authorized dealer Battery temperature sensor failure Controller MOS failure Contact manufacturer or authorized dealer Contact manufacturer or authorized dealer Controller hardware over current Vehicle power limit use Battery discharging level 2 over temperature... -
Page 41: Common Troubleshooting
Controller or motor Repair/replace the controller or motor at Vehicle does not power on encoder failure Surron after-sales points Main cable fuse blown Check all cables and replace fuse Check key switch cable connection Repair or replace the battery at... - Page 42 Troubleshooting Troubleshooting NOTE We may update and supplement the above content, please get the latest version from your dealer or official website. 11.11 11.12...
-
Page 43: Warranty Information
Labor to replace parts that are covered by the purchased from an authorized Surron dealer to be For Light Bee X version, racing motorcycle or used cle is defect-free both in terms of material and Surron warranty and are found to be defective in... -
Page 44: Owner Responsibility
5. Normal wear components, including but not scheduled intervals. stones, salt. Fading or painted or metal coated 5. The owner must return the Surron motorcycle or limited to the following: tires, rim, brake compo- Any service work done by the owner without any surfaces. -
Page 45: Limitations On Warranty
Note: a defect which could cause a crash or could cause tion on behalf of Surron. Surron in its sole discre- covered product back to its owner, mechanic’s We will complete the warranty work as soon as... -
Page 46: Reporting Safety Defects
12.7 12.8 campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Surron. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at: 1-888-327-4236 (TTY:1-800-424-9153); go to http://www.safercar.gov or write to: Administrator National Highway Traffic Safety... -
Page 47: Annex
Annex Annex After you have had your Light Bee electric motorcycle serviced, please make sure that the appropriate maintenance record has been completed. Use the space "Remark" to record issues you want to remind yourself about or mention at the next service. 100KM 500KM Odometer Reading... - Page 48 Annex Annex 1000KM 2000KM Odometer Reading Performed by Date Odometer Reading Performed by Date 13.3 13.4 Maintenance Record Maintenance Record Remark Remark...
- Page 49 Annex Annex 5000KM 10000KM 12months Odometer Reading Performed by Date Odometer Reading Performed by Date 13.5 13.6 Maintenance Record Maintenance Record Remark Remark...
- Page 50 Annex Annex Light Bee Electric Motorcycle After-sales Record Sheet Light Bee Electric Motorcycle After-sales Record Sheet Odometer Reading Warranty Item Performed by Date Remark Odometer Reading Warranty Item Performed by Date Remark 13.7 13.8...
-
Page 51: Parameters List
Annex Annex PARAMETERS LIST Changes or modifications not expressly 1、Reorient or relocate the receiving antenna. approved by the party responsible for compli- Vehicle model QL4000DY-A 2、Increase the separation between the equip- ance could void the user's authority to operate Dimension 1850x780x1080mm ment and receiver.
Need help?
Do you have a question about the LIGHT BEE X and is the answer not in the manual?
Questions and answers