Advertisement
S A F E T Y I N F O R M AT I O N
When using your hairdryer, basic safety precautions
should always be followed. Please read these
instructions carefully before using the product, and keep
them in a safe place for future reference.
I I
I I
Use this appliance for its intended use only.
1
To protect against the risk of electric shock, do
2
not immerse the appliance in water or in any
I I
other liquids.
Check the voltage on the rating plate of the
3
hairdryer corresponds with your house
electricity supply which must be AC (alternating
I I
current).
4
Always unplug the appliance when it is not in
I I
use.
Do not leave the hairdryer switched on whilst
5
unattended
.
CONCENTRATOR
NOZZLE
THERMOCERAMIC
PLATE
COOL SHOT
HEAT/SPEED DIAL
HANGING LOOP
:
I I
Do not take this product into a bathroom or use
6
I I
near water.
7
In the event of cable damage, do not attempt to
replace the mains cable – return to Morphy
I I
Richards.
8
It is recommended that the product should not
I I
be used by children
Do not place on surfaces that are likely to be
9
I I
damaged by heat.
Ensure the filter is cleaned regularly
1 0
H OW TO U S E YO U R
AIR FILTER
H A I R D RY E R
I I
1
Having shampooed your hair, ensure that it is
rinsed thoroughly as shampoo that is left in the
I I
hair will leave it looking dull.
2
Comb your hair through with a wide tooth comb
I I
to remove tangles before styling.
ON/OFF
I I
SWITCH
3
Ensure the concentrator nozzle is detached.
4
Slide the on/off switch to position I switch the
I I
hairdryer on.
5
Use the unique heat/speed dial to change the
dryer to a faster, hotter setting to remove excess
I I
water from your hair.
6
As your hair begins to dry, switch off the hair
dryer and clip on the concentrator nozzle to
C L E A N I N G T H E F I LT E R
Cleaning the air filter regularly will ensure that only
clean air is used to dry your hair and that the dryer
will not overheat and cut out. To remove the air
filter, ensure the hair dryer is unplugged from the
mains supply and hold the body of the dryer firmly
while twisting the cover to release the filter. Take out
the filter to clean away hair and lint using a vacuum
cleaner. Ensure the filter is completely dry before
refitting. To re-fit, locate the air filter into the filter
cover and click the cover back into place.
2 - Y E A R G U A R A N T E E
It is in your interest to retain the retailers receipt as
proof of purchase. Please quote the model number if
the product develops a fault. This number can be
found on the handle of the product.
W I R I N G
This product is fitted with a 13A (BS1363) plug. A 13
amp fuse (BS1362) must be used. Check the voltage on
the rating plate of your appliance corresponds with your
house electricity supply which must be AC (Alternating
current). If the socket outlets in your home are not
suitable for the plug supplied with this appliance the
plug should be removed and an appropriate one fitted.
IMPORTANT: THE PLUG REMOVED FROM THE MAINS
LEAD, IF SEVERED MUST BE DESTROYED AS A PLUG
WITH BARED FLEXIBLE CORD IS HAZARDOUS IF
ENGAGED INTO A LIVE SOCKET OUTLET.
.
M A I N S L E A D
.
As a safety precaution and to prolong the life of your
appliance, do not wrap the mains lead around the
appliance as this will cause damage.
:
:
I I
7
I I
8
I I
9
All Morphy Richards products are individually tested
before leaving the factory. In the unlikely event of
any appliance proving to be faulty within 28 days of
purchase it should be returned to the place of
purchase for it to be replaced.
If a fault develops after 28 days and within 24
months of original purchase, you should contact the
helpline number quoting the model number of the
product, or write to the address below. You will be
asked to return the product (in secure packaging) to
the address below along with a copy of proof of
purchase:
:
The After Sales Division
Morphy Richards Ltd.
Mexboroug,
South Yorkshire
England, S64 8AJ
: `
:
begin styling your hair. If you are blow drying
curly hair into a straight style, use the
concentrator to direct air down into the shaft of
the hair.
As you begin to style your hair during drying,
use the heat/speed dial to select a slower/cooler
setting.
When your hair is dry, and you have achieved
the desired style, press and hold the cool shot
button. This will release a burst of cold air which
will set your style in place.
Always remember to switch the on/off button to
the 0 position, to turn tour hairdryer off.
Advertisement
