Advertisement
Quick Links
Ioniser - Ionic flow
prevents frizz and static
USING YOUR HAIR DRYER
After washing your hair, it's really important to prepare it for styling. If you use lots of heated
styling tools on your hair, try to use a heat protection spray before you begin styling. Always
dry the excess water from your hair using a towel, then use a wide tooth comb to detangle
and smooth your hair.
To begin drying, remove the nozzle from your dryer, and blast your hair with the dryer on
the highest speed setting until your hair is 50% dry – when your hair is almost dry you can
begin to style it.
As your hair begins to dry, switch off your dryer and attach the concentrator nozzle. Use
the sectioning clips to split the hair into manageable sections – this will ensure that each
section is thoroughly dried and styled, as leaving moisture in the hair can cause frizz.
Using the nozzle helps to direct the airflow and will give your hair a sleek and smooth finish.
If you are blow drying curly hair into a straight style, use the nozzle to direct air down the
shaft of the hair.
If you want to create volume instead, attach the diffuser to your hair dryer. Collecting hair in
the diffuser as you dry will give you a textured/tousled look or will enhance natural curls.
As your hair dries, use the dryer on a slower speed setting so as not to blow your style out
of place. When you have achieved the style you want and your hair is thoroughly dry, press
and hold the Cool Shot button for a blast of cold air to set your style in place.
For hints and tips on creating funky new styles have a look at the style guide enclosed.
DON'T FORGET – to switch off your hair dryer and store when you have finished drying! If
you want to store your hair dryer in the gift box, always make sure the hair dryer has
cooled down and never wrap the cable around the product, as this can cause damage
SAFETY INFORMATION
When using your hair dryer, you must follow basic safety precautions. Please read these
instructions carefully before using the product and keep them in a safe place for future
reference.
01 Use this appliance for its intended use only.
02 To protect against the risk of electric shock, do not immerse the appliance in water or
in any other liquids.
03 Check the voltage on the rating plate of the hairdryer corresponds with your house
electricity supply which must be AC (alternating current.)
04 Always unplug the appliance when it is not in use.
05 Do not leave the hair dryer switched on whilst unattended
06 Do not take this product into a bathroom or use near water.
07 In the event of cable damage, do not attempt to replace the mains cable – return to
Morphy Richards.
08 It is recommended that the product should not be used by children
09 Do not place on surfaces that are likely to be damaged by heat.
10 Ensure the filter is cleaned regularly
Diffuser Attachment
3 Heat Settings
2 Speed Settings
MODEL21027
DIFFUSERDRYER
Removable Filter
Cool Shot
Hanging Loop
2 YEAR GUARANTEE
It is in your interest to retain the retailers' receipt as proof of purchase. Please quote the
model number if the product develops a fault. This number can be found on the handle of
the product.
All Morphy Richards products are individually tested before leaving the factory. In the
unlikely event of any appliance proving to be faulty within 28 days of purchase, it should be
returned to the place of purchase to be replaced.
If a fault develops after 28 days and within 24 months of original purchase, you should
contact the Helpline number quoting the model number of the product, or write to the
address below. You will be asked to return the product (in secure packaging) to the
address below along with a copy of proof of purchase.
The After Sales Division, Morphy Richards ltd, Mexborough, South Yorkshire
England, S64 8AJ
Helpline (8.30-5.00 Mon-Thurs/8.30-4.00 Fri)
•
UK 0870 060 2614
Republic of Ireland 1800409119
For extra tips on styling, and details of the rest of the Products in the Morphy Richards
range please see our website
www.morphyrichards.com
Morphy Richards products are intended for household use only. Morphy Richards has a
policy of continuous improvement in product quality and design. The company therefore
reserves the right to change the specification of its models at any time.
Registered address:
Morphy Richards Ltd, Mexborough, South Yorkshire, S64 8AJ
CLEANING THE FILTER
To remove the filter, make sure your hairdryer is unplugged from the mains supply and twist
the rear cover. To do this, hold the body of the dryer firmly and twist the cover to reveal the
air filter. Clean the filter, removing any hair and lint using a vacuum cleaner. Ensure the filter
is completely dry before re fitting. To refit, twist the cover back into place.
WIRING
This product is fitted with a 13A (BS1363) plug. A 13 Amp fuse (BS1362) must be used. If the
socket outlets in your home are not suitable for this appliance, the plug should be removed and
the appropriate one fitted. In the event of cable damage, do not attempt to replace the mains
cable return to Morphy Richards.
WARNING: The plug removed from the mains lead, if severed, must be destroyed. A plug
with bared flexible cord is hazardous if engaged into a live socket outlet.
MAINS LEAD
As a safety precaution and to prolong the life of your appliance, do not wrap the mains lead
around the appliance as this will cause damage.
Part Number
PC21027M UK rev 1
Advertisement
