Dedicated Helpline - Morphy Richards HAND MIXER 48954 - AUTRE Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

Enlarged version

FP48954MEE-Rev1

26/4/06

4:21 pm

Page 4

⁄

ﬂ

ﬁ

ELECTRICAL

REQUIREMENTS

Check that the voltage on the rating

plate of your appliance corresponds

with your house electricity supply

which must be A.C. (Alternating

Current).

If the socket outlets in your home

are not suitable for the plug supplied

with this appliance, the plug should

be removed and the appropriate one

fitted.

Warning: The plug removed from

the mains lead, if severed, must

be destroyed as a plug with

bared flexible cord is hazardous

if engaged into a live socket

outlet.

Where used, should the fuse in the

13 amp plug require changing, a 3

amp BS1362 fuse must be fitted.

This appliance does not need to be

earthed. It is a double insulated

product.

www.morphyrichards.com

‹

‡

‹

Turbo

›

Features

⁄ Release button

¤ Speed control slider

‹ Turbo switch

› Body

ﬁ Sockets

ﬂ Beaters

‡ Dough hooks

Assembly

WARNING: Make sure that the

mixer is switched off and

unplugged.

Choose beaters or dough hooks.

•

Use beaters for mixing, beating,

whipping and creaming liquids and

mixtures.

•

Use dough hooks for kneading

dough.

Insert the stem of the beater or

dough hook into one of the sockets

in the body.

•

The dough hook with the groove

should go into the hole with the

sleeve on the mixer A.

Push and turn the beater or dough

hook until it locks into place.

Repeat for the other beater or hook.

Using your Hand Mixer

Switch on by sliding the speed slider

to one of the positions 1 (lowest

speed) to 5 (highest speed).

•

It is recommended to start at a low

speed, then change to a higher

speed as required.

•

Only use the turbo setting for short

bursts of mixing.

•

Use turbo on speed 5.

•

Pressing the turbo on speed 1-4 will

give a slight increase in speed if

required.

Switch off by returning the slider to

To eject the beaters and dough

hooks place the mixer on its base

and press the top half of the release

button on the front of the mixer with

both hands B.

Gently remove the beater or dough

hooks.

IMPORTANT: Do not operate the

mixer continuously for more

than 6 minutes (with beaters) or

2 minutes (with dough hooks).

After using for these lengths of

time, let it cool down for 10

minutes before using again.

•

When working with liquids, use a

low speed in order to avoid

splashing onto the mixer and firmly

hold the liquid container.

TOP TIPS

•

When making dough, first mix the

dry ingredients including oils, fats or

butter with beater for approx 30

seconds on speed 5 until they form

breadcrumbs. Change to dough

hooks and gradually add water

using speed 5. Change to speed 2

•

Name of the product

to knead the dough for approx. 1

•

Model number as shown on the

minute.

underside of the appliance or rating

plate

Cleaning

•

Serial number

•

Before cleaning and maintenance,

switch the appliance off and unplug

YOUR FIVE YEAR

from the mains.

GUARANTEE

•

Remove and wash the beaters and

dough hooks in warm soapy water

For UK customers only

and dry well.

This 5 year guarantee is only valid when registered

•

Wipe the motor unit with a damp

directly with Morphy Richards. If you do not

cloth. Do not use any abrasive or

solvent-based cleaner.

WARNING: Never immerse motor

To validate your 5 year

unit in water or other liquid.

guarantee, there are 2 easy

ways to register:

Telephone our consumer helpline