1. Manuals
  2. Brands
  3. DDMALL Manuals
  4. Media Converter
  5. HEV-10
  6. User manual

DDMALL HEV-10 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HEV-10 User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HEV-10 and is the answer not in the manual?

Questions and answers

Related Manuals for DDMALL HEV-10

Summary of Contents for DDMALL HEV-10

  • Page 1 HEV-10 User Manual...

  • Page 2: Table Of Contents

    Contents HEV-10 Introduction ......................... 1 Main Features ..........................1 Parameters ..........................2 3.1 General ..........................2 3.2 Video Parameters ........................ 2 3.3 Audio Parameters ........................ 3 3.4 System Parameters ......................3 4. Typical Applications ........................3 5. Packing List ..........................4 6.
  • Page 3 10. FAQ ............................52 10.1 Unable to log in to HEV-10 web UI for the first time ............. 52 10.2 Unable to log in to HEV-10 web UI after modifying the IP address ....... 53 10.3 HEV-10 has no image input .................... 53 10.4 There is no image output when the decoder plays the HEV-10 video ......

  • Page 4: Hev-10 Introduction

    1. HEV-10 Introduction The HEV-10 is a high-definition encoder with local loopout, supporting HDMI input resolution up to 4K@60Hz, and video local loopout resolution up to 4K@60Hz with zero delay. It can be connected to local 4K or 2K monitors to monitor videos. The encoding outputs resolution up to 1080P@30Hz at video bit rate up to 16M.

  • Page 5: Parameters

    3. Parameters 3.1 General Power Supply 5V/1 A (USB-powered) Power Consumption 3.4W Operating Temperature -10~50℃ （14~122℉） Storage Temperature -20~85℃ （-4~185℉） Operating Humidity 10%- 90%RH (Non-condensing) Weight Dimension 110mm(L)*60mm(W)*22mm(H) MTBF 30,000h Table 1 3.2 Video Parameters Video Input Standard HDMI2.0 Input Resolution & 4096*2160p@60Hz/30Hz，...

  • Page 6: Audio Parameters

    3.3 Audio Parameters Audio Input Standard HDMI Audio Encoding compression Formats G711u, AAC Bit Rate G711u: Fixed 8kbps AAC: 32kbps~256kbps Table 3 3.4 System Parameters Supported Streaming Protocols SRT, HLS, RTP, RTSP, RTMP, RTMPS, UDP/TCP Streaming Mode Multicast/Unicast Control Method Web UI Default IP Address 192.168.1.251...

  • Page 7: Packing List

    5. Packing List Figure 2 6. Product Overview Figure 3...

  • Page 8: Indicator Light

    Press and hold the set button for about 10s and release it when both L1 and L2 flash in red and green alternately to reset HEV-10 to factory default settings automatically, and all parameters will be reset to factory default values. (By default, the IP address of HEV-10 is 192.168.1.251)

  • Page 9: Hardware Installation

    ④ Power HEV-10 with a USB cable. ⑤ The control terminal of HEV-10 must be set on the same LAN, and IP address must be on the same network segment of HEV-10 (By default, the IP address of the encoder is 192.168.1.251).

  • Page 10: Network Setting

    The default IP address of HEV-10 is 192.168.1.251. The control computer of HEV-10 must be on the same LAN and the IP address must be on the same network segment of HEV-10. For the first use, please modify the control computer IP address to 192.168.1.xxx (xxx can be any number ranges from 0 to 255, except 251).

  • Page 11: Log In To The Encoder Web Ui

    8.2 Log In to the Encoder Web UI 1. Open the browser of the control computer, type “192.168.1.251” (the default IP address of HEV- 10) to load the HEV-10 login page, type user name and password(admin/ admin by default) to log in to HEV-10 web UI.
  • Page 12 LAN that the HEV-10 has connected.  Click Apply to take settings effect. Please use the new IP address to re-log in to HEV-10 web UI and set up parameters (Note: the control terminal computer IP address must be set on the...

  • Page 13: Parameter Settings

    Open the browser of the control terminal connected on the same LAN of HEV-10 such as mobile phone/ tablet/ laptop, etc, type the IP address of HEV-10 to load the encoder login page, and type the default user name and password (admin/ admin) to enter the web UI, where you can set parameters including Audio, Video, Network, RTMP, Misc Stream (RTSP, UDP, SRT, HLS setting), System, etc.
  • Page 14 HDMI cable. ③ Whether the HDMI output resolution of the signal source is within the resolution range supported by the encoder. The HEV-10 supports maximum input of 1920*1080@60Hz. 2. Primary Stream Display the current Audio, Video, and URL parameters of the primary stream, as shown in Figure 9.

  • Page 15: Audio Settings

    Figure 10 9.3 Audio Settings Click the Audio icon on the left menu to load the Audio page, where you can set the related parameters according to your application, click Apply to complete the Audio parameter setting. Figure 11 1. Encoding Type...

  • Page 16: Video Setting

    Encoding Type is G711u, the bit rate range is fixed at 8Kbps. 9.4 Video Setting The HEV-10 supports dual stream outputs. The primary stream supports maximum of 1920*1080@30 16Mbps encoding output, the secondary stream supports maximum of 1280*720@30 2Mbps encoding output. The primary stream is disabled by default. To enable it, please click the Video icon on the left menu to load Video page, and put Secondary Stream toggle on the “ON”...

  • Page 17: Encoding Setting

    parameters, and set up custom text or image OSD labels. Click Apply to complete the corresponding Video parameter settings. 9.4.1 Encoding Setting 1. Input Status: Display the resolution of the current input signal source. If there is no signal input, No Signal will be displayed. 2.

  • Page 18: Osd Setting

    Figure 13 9.4.2 OSD Setting The primary stream and secondary streaming each support 2 text OSD (TEXT1 and TEXT2) and 1 image OSD. The text/image OSD labels will be overlaid on the input video source to be encoded, compressed, transferred together, and displayed on decoding display. Figure 14 1.
  • Page 19 X/ Y coordinate values are the position of the first character of text OSD label. For example, the TEXT content is DDMALL, and X/Y coordinates are set to [700,500], that is the position where the first character "D" is displayed.
  • Page 20 4）Font Size: Adjust the font size of the text label. 5）Font Color: Set the font color of the text label. 6）Alpha: Set text label font transparency. 7）Click Apply, the webpage prompts “Change setting Successfully”, it means the setting is successful and the parameters take effect. 2.

  • Page 21: Network Setting

    LAN of HEV-10. You can log in to management interface of the router to check the assigned IP address of HEV-10. If Static is checked, then the HEV-10 IP is fixed, you need to manually configure the IP ...

  • Page 22: Network/Advance

    Click Apply to take the settings effect. Please use the new IP address to re-log in to  HEV-10 web UI and set parameters (Note: the control terminal must be on the same network segment of HEV-10 new IP address).
  • Page 23 Note: The web page has 3 pairs of port correspondences by default, as shown in Figure 19: Internal port 80 is the encoder web server port, and the mapped external port is 8016; 8554 and 554 are the encoder's default RTSP server ports, and the mapped external ports are respectively 8554, 554, which can be modified or deleted through on the right.
  • Page 24 Figure 20 ③ Customize a “Hostname”, and click “Generate Hostname”. Figure 21 ④ Back to the main interface, you can see the domain name you applied, please...
  • Page 25 remember it. For example, the domain name applied for here is sinetest.ddns.net: Figure 22 4) Back to encoder web UI, enable DDNS on Network/ Advance page. Figure 23 ① Status: The connection status between the encoder and the domain name server.
  • Page 26 Connected indicates the connection is successful. ② Service Provider: Domain name server provider, optional No-ip and Dyndns, here we choose No-ip. ③ Domain Name: Fill in the domain name you applied, here we fill in: sinetest.ddns.net. ④ User name: The account used to log in to the domain name server. Here we fill in the account registered at https://www.noip.com.
  • Page 27 Figure 25 ② Play RTSP stream of the encoder on the public network through VLC software On a mobile phone or computer with Internet access, turn on VLC software, click Media,  and select Open Network Stream Click "Network" on the Open Media page and enter the URL of the encoder ...
  • Page 28 Figure 26...
  • Page 29 Figure 27 Figure 28...

  • Page 30: Rtmp Setting

    Server URL and Stream Key. 3. Log in to HEV-10 web UI, click RTMP icon on the left menu to load the RTMP page, paste the Server URL and Stream Key provided by the streaming platform to the Server URL and Stream Key on RTMP page, click Start to start the live streaming.
  • Page 31 4) Stream key: RTMP stream key, paste the Stream Key provided by the streaming platform here. 5) Authentication: Enable or disable the stream authentication, if the streaming platform requires stream authentication settings, please enable the RTMP authentication of HEV-10, enter the authentication user name and password provided by the platform.

  • Page 32: Youtube Streaming Operation

    Figure 30 6) Status: The connection status of the RTMP live. 7) Start: Start streaming. If the Status is Connecting, it means the connection is in progress. If the Status is Connected, it means the connection is successful and the streaming is in progress. 8) Stop: Stop streaming.
  • Page 33 4. Copy and paste Stream URL and Stream key of YouTube to the stream URL and Stream key column on HEV-10 RTMP page. For example, fill in Stream URL and Stream key under RTMP/Primary Stream NO.1, the first RTMP streaming channel of primary stream will be used.

  • Page 34: Facebook Streaming Operation

    Figure 33 5. Click Start to push stream on YouTube. When the Status shows Connected, the stream is pushed successfully. 6. The streaming videos can be viewed on the YouTube Live streaming page. Figure 34 9.6.3 Facebook streaming operation 1. Open the Facebook web page to log in to your account, click Live video to enter the Create Live Video page.
  • Page 35 Figure 35 2. Under Go live selection, click Set up live video to load the Facebook Stream Setup page. Figure 36 3. On Stream Setup page, you can view the Stream URL and Stream key of Facebook live..
  • Page 36 5. Copy and paste the Stream URL and Stream key provided by Facebook to the Stream URL and Stream key column on HEV-10 RTMP page, for example, fill in the Stream URL and Stream key columns under RTMP/Primary Stream NO.2, the second RTMP streaming channel for Primary Stream will be used.

  • Page 37: Misc Stream Setting

    7. The streaming video can be viewed on the Video section of Facebook Stream Setup page. Figure 39 9.7 Misc Stream Setting Click the Misc Stream icon on the left menu to load the Misc Stream page, click Primary Stream or Secondary Stream to load the Misc Stream setting pages of primary stream or secondary stream, where you can set up the stream protocols and related parameters of primary stream and secondary stream.

  • Page 38: Rtsp

    9.7.1 RTSP Figure 40 9.7.1 RTSP 1. Stream Protocol: Select RTSP. 2. URL1 Port: The default Primary stream port is 8554, and the default Secondary stream port is 8553. Users can customize the ports with range of 1-65535, it is recommended to use the default values.
  • Page 39 same user name and password to decode and play the video. Figure 41 7. Multicast: It is disabled when in RTSP unicast, and please enable it if you need to transmit video by RTSP Multicast. RTSP multicast IP, multicast port and TTL can be modified according to application needs.
  • Page 40 RTSP into the URL of the decoder to play the encoder video stream. Note: When using a decoder or decoding software to pull streams, please ensure that the decoder and the encoder are on the same LAN, and the IP address is on the same network segment. 10.

  • Page 41: Udp

    Figure 44 9.7.2 UDP Figure 45 9.7.2 UDP 1.Stream Protocol: Select UDP...
  • Page 42 2.Destination IP: If a Multicast IP (range 224.0.0.0~239.255.255.255) is filled in, then use UDP Multicast to transmit videos, all decoders within this multicast address can receive the video stream. If IP address of any specific decoder is filled in (such as 192.168.1.65), then use UDP Unicast to transmit videos, and only the decoding end corresponding to the IP address (192.168.1.65) can receive the encoder video stream.

  • Page 43: Srt

    Figure 46 Figure 47 9.7.3 SRT SRT includes 3 modes. They are Caller, Listener and Rendezvous. You can establish SRT connection for video transmission through these 3 modes. When the encoder is set to caller mode, the decoder needs to be set to listener mode, ...
  • Page 44 Here we use the HEV-10 and vMix to illustrate the related SRT setting operations. Note: The computer running vMix needs to be on the same LAN of the encoder HEV-10, and the IP address must be on the same network segment.
  • Page 45 1) HEV-10 SRT settings Figure 48 ①Stream Protocol: Select SRT. ②Mode: Select listener. ③Source Port: Consistent with Destination Port of Caller device, here we set as 5000. ④Latency(ms): The video buffer delay time, default value is 120ms, with a modification range of 0~5000, it is recommended to keep the default value.
  • Page 46 ①Stream Type: Select SRT (Caller). If the encoder is used as a Listener, vMix needs to be set to Caller. ②Hostname: Fill in the IP address of the Listener device (the IP address of HEV-10). ③Port: Consistent with the Source port value of the encoder (Listener).
  • Page 47 Figure 50 Figure 51 2. Set HEV-10 as caller 1) HEV-10 settings...
  • Page 48 Figure 52 ①Stream Protocol: Select SRT. ②Mode: Select caller. ③Destination Address: srt://listener device IP address (Here we fill in IP address of the vMix server). ④Destination Port: Consistent with the Source Port value of the listener device. Here we set it to 5000.
  • Page 49 more stable the SRT transmission will be, but the greater the network bandwidth is occupied. ⑨Payload Size: Mainly affects SRT transmission efficiency. It is recommended to keep the default value of 1316, which can be adjusted if needed. The bigger the value, the higher the SRT transmission efficiency.
  • Page 50 Figure 54 3. Set HEV-10 as rendezvous 1) HEV-10 Settings Figure 55...
  • Page 51 ①Stream Type: Select SRT(rendezvous). The encoder is used as rendezvous, then vMix needs to be set as rendezvous. ②Hostname: Fill in the IP address of the encoder here(the IP address of HEV-10). ③Port: Consistent with the Destination Port value of the encoder.

  • Page 52: Hls/Http

    need to fill in password here. If encoder Encryption is set to Encryption, the corresponding correct password needs to be filled in here. ⑥Click OK to complete the vMix settings, then video stream of the encoder can be received and played. Figure 56 Figure 57 9.7.4 HLS/HTTP...
  • Page 53 Figure 58 1.Stream Protocol: Select HLS/HTTP. 2.Click Start to start HLS transmission, copy URL of HLS/HTTP. 3.Open the Safari browser on iPad, enter the encoder HLS/HTTP URL in the URL to play the encoder video stream. Figure 59...

  • Page 54: System Setting

    Reset: Reset all the parameters to factory default parameters. 9.8.2 System/ User configure The user name and password for login to HEV-10 web UI can be modified on User configure page. It is recommended to modify the information in case unauthorized login from others.

  • Page 55: Faq

    UI is on the same LAN of encoder and the IP address is on the same network segment. By default, the IP address of HEV-10 is 192.168.1.251, and the control terminal IP address need to be modified to 192.168.1.xxx (xxx can be any numbers range from 0 to 255, except 251).

  • Page 56: Unable To Log In To Hev-10 Web Ui After Modifying The Ip Address

    HDMI cable to check whether it is caused by a cable issue. 4) Check whether HEV-10 is powered by USB. If not, please use a DC 5V/1A USB cable to supply power. If it is already powered by USB, please replace the USB cable and power adapter to check whether it is caused by abnormal power supply.

  • Page 57: There Is No Image Output When The Decoder Plays The Hev-10 Video

    10.4 There is no image output when the decoder plays the HEV-10 video 1. Please log in to HEV-10 web UI and check whether the input preview and Video input on the Status page are normal. 1) The input signal can be previewed, indicating that the HEV-10 input signal is normal.

  • Page 58: There Is No Image Output When Processing Rtmp Live Streaming

    Stream setting instructions, please see 9.7 Misc Stream Setting. 3. Please check whether the control terminal of decoder is set on the same LAN of HEV-10, and the IP address is on the same network segment. 4. Please confirm whether the decoder settings are correct. Is the transmission protocol...

  • Page 59: Video Playback Is Not Smooth

    RTMP setting. 2) The stream cannot be viewed in VLC decoding. Please troubleshoot according to 10.4 There’s no image output when the decoder plays the HEV-10 video 10.6 Video playback is not smooth 1. If the secondary stream is enabled, it will affect the primary stream transmission. It is recommended that when using the primary stream and the secondary stream at the same time, the bit rate of the primary stream and secondary stream should not exceed 10M.
  • Page 60 software to the latest version and uncheck the VLC "Use RTP over RTSP (TCP)" option, which will also improve the multicast. Set as shown below: Figure 62...
  • Page 61 Figure 63...
  • Page 62 Figure 64...

Table of Contents