TP-Link VIGI EasyCam C320 Installation Manual page 2

4. Use Your Camera with an NVR
The camera works with an NVR for easier batch access and management.
*Here we use a VIGI NVR as an example.
Network Camera
Network Camera
Step 1. Connect the Hardware
Connect your cameras to the same network as your NVR
(as shown above).
Step 2. Power On the Cameras
Power on your camera with the PoE power supply.
5. More Management Methods
Remotely view live video, manage cameras, and
get instant alerts.
1. Download and install the TP-Link VIGI app.
or
2. Open the TP-Link VIGI app and log in with your TP-Link ID. If you
don't have an account, sign up first.
3. Tap the + button on the top right and follow the app instructions
to activate and add your cameras.
Usage Tips:
• Make sure your power supply matches your camera. The power source should
comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) of IEC
62368-1.
• Make sure that the wall is strong enough to withstand 4 times the weight of the
camera and mounting bracket.
• If you are uncertain or uncomfortable performing the installation, consult a qualified
electrician. It is recommended to install it in a place that children cannot touch.
Safety Information
• Do not use any other chargers than those recommended.
• Do not use damaged charger or USB cable to charge the device.
• Do not attempt to disassemble, repair, or modify the device. If you need service,
please contact us.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Keep the device away from fire or hot environments. DO NOT immerse in water or
any other liquid.
For technical support, replacement services, user guides, and more
information, please visit https://support.vigi.com/.
PoE Network Device
(e.g., Switch or Router)
VIGI NVR
Step 3. Add Cameras with the NVR
Before you start, make sure your NVR is working properly.
1. Right click on the Live View screen, and click Add Camera.
2. Select your camera and click
If you have disabled Plug and Play on your NVR, create a
password or use a preset password for your camera.
Done! You can now view live video and manage cameras.
Note: For more detailed instructions, refer to the user guides at
https://support.vigi.com/
View live video and modify camera settings via a
web browser.
1. Find the camera's IP address on your router's client page.
2. On your local computer, open a web browser and enter
https://camera's IP address (https://192.168.0.60 by default).
3. Follow the web instructions to activate your cameras.
Done. You can view the live video on the Preview page, and go to
the Settings page to change camera settings.
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU,
2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at
https://www.tp-link.com/en/support/ce/
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Electromagnetic Compatibility
Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK Declaration of Conformity may be found at
https://www.tp-link.com/support/ukca
Monitor
+
to add your camera directly.