Notations used in this Repair Manual ................2 Safety precautions ......................4 Disclaimer of warranties and limitation of damages .............6 Notification ........................6 Service tools Nikon service tools .......................7 Standard service tools ....................7 Illustrated Service Parts List Parts Removal and Replacement Procedures Before disassembling the Product ................25 During the repairing ....................25...
Page 3
HINGE UNIT............................. 66 BACK COVER UNIT ........................67 Assembly ........................71 REAR COVER UNIT ........................71 HINGE UNIT............................. 76 BACK DISPLAY UNIT ........................78 ISO DIAL UNIT ..........................82 HOT SHOE FPC UNIT ........................88 RELEASE BUTTON UNIT ....................... 95 EXPOSURE COMPENSATION DIAL UNIT ..................
● For purposes of this Repair Manual, "Nikon" means Nikon Corporation, and all direct and indirect affiliated companies, including without limitation, Nikon Inc. ● This Repair Manual is solely intended for Nikon products imported into and sold in the Unit- ed States by Nikon Inc.
The disassembly and assembly procedures in this manual are described using illustrations of the Z f Black. The actual product may differ from that of the other colors of Z f. Product identification information For the camera serial numbers, refer to the documentation provided with the camera (the Reference Guide).
Page 6
Read this first ● No part of this Repair Manual may be reproduced, transmitted, transcribed, stored in a re- trieval system, or translated into any language in any form, by any means, without Nikon's prior written permission. ● Illustrations shown in this Repair Manual may differ from the actual Product.
Product from being able to be attached and will cause problems when shooting. In such cases, accurate adjustments and repair will be required and it is recom- mended that you contact Nikon for service repairs. ● If the Product contains a lithium-ion battery, then inappropriate use, transportation, recycling, reuse, or disposal of the lithium-ion battery may cause a fire, explosion or other damage or injury.
Page 8
Safety policy and procedure ● All Product safety issues must be managed according to the following points. ● If any of the following conditions are visible, stop repairing the Product and contact Nikon's customer service at www.nikonproductsupport.com. – There are burnt or melted components or traces on the outside of the Product, or other heat-related damage (including scorching on charging terminals or other connection terminals).
● All the information, descriptions, materials, and products provided on or in connection with this Repair Manual are provided by Nikon on an "as-is basis" and in "the form that can only be provided if possible'' unless otherwise expressly specified in writing by Nikon. With re-...
This section shows the tools used to repair products. The standard service tools are commercially available and can be purchased from third party retailers. Nikon hereby disclaims all responsibility and liability for any tools or other items purchased from third party retailers.
Illustrated Service Parts List ● The parts marked in gray in the illustration cannot be replaced in- dividually as replacing them will affect the optical performance. If IMPORTANT you need to replace these parts, use the CAMERA BODY UNIT (143VX). ●...
Page 22
13J6P Indigo Blue 13J8K Bordeaux Red 13J8L Moss Green 13J6E Indigo Blue 13J8P Sunset Orange 13J6F Bordeaux Red 13J8R Stone Gray 13J6G Moss Green 13J8S Sepia Brown 13J6H Sunset Orange 13J6J Stone Gray 13J6K Sepia Brown 13J5X Indigo Blue 13J5Y Bordeaux Red 13J5Z Moss Green 13J60 Sunset Orange 13J61 Stone Gray...
Page 23
The parts highlighted in purple are not included with the CAMERA BODY UNIT (143UW) 143VX...
Page 24
Item code Parts name Q'ty 6A-17040FA SCREW 1A-17035FD2 SCREW 13E1X SHEET 1A-17025FD2 SCREW 13C4K TOP COVER UNIT 1264Y-A0P3H8 SCREW 1A-17030FD2 SCREW 138R9 SCREW 13C4G HEAT CONDUCTION SHEET 13R3Z SCREW 13C4F SCREW 12R78 SCREW 12H46 SCREW 12H4B SCREW 134AE SHEET 12F6X SHEET 13S3J IF COVER UNIT...
Page 25
Item code Parts name Q'ty 13C4W MONITOR SWITCHING BUTTON 12A3G RUBBER 13C4T PLAYBACK/DELETE BUTTON 13C53 CHARGE LED WINDOW 13C4Z AF ASSIST LAMP WINDOW 13H1X AF ASSIST LAMP BASE UNIT 13H1Z RELEASE BUTTON UNIT 13C21 SPONGE 13K1W COLLAR 13C1Z SHEET 13C70 BRUSH UNIT 13C1W RELEASE LEVER CLICK PLATE...
Page 26
Item code Parts name Q'ty 1278Z ACCESS LAMP WINDOW 13C3A 4 BUTTON 13H1H BACK COVER FPC UNIT 11F0M SPRING 13H1J BACK KNOCK UNIT 13A31 SPEAKER 13H1N BACK DISPLAY UNIT 13H1P HINGE COVER UNIT 12S07 SCREW 13C2V TRIPOD FIX PLATE 13H1L HINGE UNIT 134BK SCREW...
Parts Removal and Replace- ment Procedures Before disassembling the Product ● As for the Product powered on by the power switch, before disas- sembling the Product, be sure to check that the Product is powered off and that the battery has been removed. ●...
BATTERY CAP UNIT BATTERY CAP BATTERY CAP UNIT (13H32) UNIT (13H32) NECK-STRAP RING NECK-STRAP RING COVER (1K685-799) × 2 NECK-STRAP RING (1K100-035) × 2...
DIOPTER ADJUST UNIT SCREW (6A-17040FA) DIOPTER ADJUST UNIT (13H01) Boss × 2 EYEPIECE BARREL UNIT SPRING EYEPIECE (127MZ) BARREL UNIT (129PT) Shaft Shaft Shaft...
4. TOP COVER TOP LCD WINDOW (13B9M) Double stick tape This is covered with DOUBLE STICK TAPE. Apply ethyl alcohol and use a cutter or other fine-tipped tool to remove it. Be careful not to scratch it with the cutter. SCREW (6A-17045FD2) ×...
Page 50
SCREW (6A-17045FD2) EVF support plate Top cover heat sink Boss × 2 LOGO PLATE (13C59) Boss × 2 SCREW (6A-17045FD2) × 2 SPONGE (13C5E) SPONGE (13C5C)
MAIN COMMAND DIAL UNIT SCREW (6A-14035FA) × 2 Boss × 2 BRUSH COVER (13B9Z) BRUSH Boss UNIT × 2 (13B8G) DIAL BASE UNIT (13H2A) DIAL BASE UNIT (13H2A) Guide SCREW (13E1V) × 2 MAIN COMMAND DIAL UNIT (13H2B)
DIAL BASE UNIT Double stick tape DIAL BASE UNIT (13H2A) SCREW (6A-17045FD2) × 2 SCREW (6A-17035FD2) × 2 DIAL BASE UNIT (13H2A) SCREW (6A-17045FD2) × 2 Boss × 5 DIAL BASE UNIT (13H2A) SCREW (6A-17035FD2) × 2...
Page 53
VIDEO BUTTON (13C5A) SPRING (13C2D) STEEL BALL (T2-02300SX) Boss × 2 SCREW (6A-17035FD2) Boss × 2 RUBBER (12A3G) Boss × 2 RUBBER (12A3G)
SHUTTER DIAL UNIT SHUTTER DIAL UNIT (13H24) STEEL BALL (T1-02000SX) SPONGE (13C66) SPRING (13B4M) BRUSH UNIT BRUSH UNIT (134TA) (134TA) SCREW (134YD) DIAL LOCK BUTTON CAP (13B4F) TAPE (134S3)
Page 56
SCREW (6E-17035FA) SPRING (13B4M) BRUSH UNIT STEEL BALL (13B4V) (T1-02000SX) Boss SCREW (6A-17035FD2) × 2 DIAL BASE UNIT (13H22) SPONGE (13B4T) Boss × 2...
SPONGE (13C68) SHEET (13B4U) VIDEO SWITCHING LEVER (13B54) EXPOSURE COMPENSATION DIAL UNIT SCREW (13B9D) BRUSH BASE UNIT (13B9E) CLICK PIN (13B8X) CLICK PIN (13B8X) SPRING (13B99) SPRING (13B99) DIAL BASE UNIT (13H21) EXPOSURE COMPENSATION DIAL UNIT (13B90)
SCREW (6A-17035FD2) × 2 DIAL BASE UNIT (13H21) RELEASE BUTTON UNIT SCREW (13C2C) × 2 RELEASE LEVER CLICK PLATE (13C1W) BRUSH UNIT (13C70) Boss × 2 SHEET (13C1Z) SPONGE (13C21) RELEASE BUTTON UNIT (13H1Z)
COLLAR (13K1W) HOT SHOE FPC UNIT SCREW (6A-17035FD2) × 2 Boss × 3 AF ASSIST LAMP BASE UNIT (13H1X) Boss × 2...
Page 60
Boss × 3 Boss × 2 PLAYBACK/DELETE BUTTON (13C4T) HOT SHOE FPC UNIT (13H2C)
Page 61
AF ASSIST LAMP WINDOW (13C4Z) HOT SHOE FPC UNIT (13H2C) SCREW (6A-17035FD2) CHARGE LED WINDOW (13C53) CHARGE HOT SHOE FPC UNIT (13H2C) WINDOW (13C53) Do NOT touch red area. HOT SHOE FPC UNIT (13H2C) SCREW (6A-17035FD2) plate Boss × 2...
Page 62
Boss × 2 RUBBER (12A3G) Double stick tape SCREW (6E-17030FD2) × 2 Boss × 2 HOT SHOE FPC UNIT (13H2C) HOT SHOE FPC UNIT (13H2C)
Page 63
SCREW (6E-17030FD2) MONITOR SWITCHING BUTTON (13C4W) MONITOR SWITCHING BUTTON (13C4W) HOT SHOE FPC UNIT (13H2C) HOT SHOE FPC UNIT (13H2C) Boss × 2 SCREW (1331C) × 4 HOT SHOE FPC UNIT (13H2C) HOT SHOE FPC UNIT (13H2C) Unsolder × 2 Unsolder ×...
Page 64
HOT SHOE FPC UNIT (13H2C) Boss × 6 HOT SHOE MOLD UNIT (11X05) Boss HOT SHOE UNIT (1C998-039)
ISO DIAL UNIT ISO DIAL UNIT (13H1U) STEEL BALL (T1-02000SX) SPONGE (13C66) SPRING (13B4M) BRUSH UNIT (134TA) SCREW (134YD) SCREW (6E-17035FA) SPRING BRUSH (13B4M) UNIT STEEL BALL (13B4V) (T1-02000SX) Boss...
Page 66
DIAL LOCK BUTTON CAP (13B4F) TAPE (134S3) SCREW (6A-17035FD2) × 2 ISO DIAL BASE UNIT (13H1V) SPONGE (13B4T) Boss × 2 SPONGE (13C67) SHEET (13B4U) SHOOTING MODE LEVER (13B4P)
5. BACK COVER BACK DISPLAY UNIT SCREW SCREW (12R78) × 2 (12S07) SCREW (6A-17040FD2) × 2 HINGE COVER UNIT (13H1P) TRIPOD FIX PLATE (13C2V) SCREW (1A-17030FD2) × 3 BACK DISPLAY UNIT (13H1N) Boss × 2 BACK COVER UNIT (13X7T)
BACK COVER UNIT SCREW (6E-17035FD2) SCREW (6A-17035FA) SCREW (6A-17035FA) × 4 × 2 SCREW Back holding plate unit (6A-17035FA) × 3 Back holding SCREW plate unit (6E-17035FD2) SCREW (6A-17035FA) × 3 Boss × 6 SPRING (11F0M) BACK KNOCK UNIT (13H1J)
Page 71
BACK COVER FPC UNIT (13H1H) SPEAKER (13A31) Boss × 12 4 BUTTON RUBBER (13C3A) (13D1R) ACCESS LAMP WINDOW (1278Z) Boss × 3 Boss × 2...
Page 72
OK BUTTON (133V2) MULTI SELECTOR (1276H) SPONGE (1317S) I BUTTON (13C39) Boss × 2 Fixing plate SCREW (6A-17035FA) × 3 Radiate heat plate Boss × 4 Projecting section...
Page 75
I BUTTON (13C39) Boss × 2 BUTTON MULTI SELECTOR SPONGE (133V2) MULTI SELECTOR (1276H) (1276H) (1317S) MULTI SELECTOR (1276H) SPONGE (1317S) OK BUTTON (133V2) SPONGE (1317S)
SCREW (6E-17035FD2) Back holding plate unit HINGE UNIT HINGE UNIT (13H1L) HINGE UNIT (13H1L)
Page 80
Cutout Boss × 2 HINGE SCREW (134BK) × 2 UNIT (13H1L) Solder × 2 Solder × 2 HINGE UNIT Black (13H1L) Blue Yellow Align the position in the figure.
BACK DISPLAY UNIT COVER SHEET (BACK DISPLAY; 13C32) COVER SHEET (BACK DISPLAY; 13C32) Reference position for attachment SPONGE BACK DISPLAY COVER (13H53) UNIT (13H1M) BACK DISPLAY COVER UNIT SPONGE (13H1M) (13H53) Reference position for attachment Hook × 5 HINGE UNIT (13H1L)
Page 82
HINGE UNIT HINGE (13H1L) SCREW UNIT (12H4D) (13H1L) × 4 SCREW (1A-17030FD2) × 3 BACK DISPLAY UNIT (13H1N) Boss × 2 BACK COVER UNIT (13X7T)
Page 83
SCREW (12S07) SCREW (12R78) × 2 Boss × 2 HINGE COVER UNIT (13H1P) HINGE COVER UNIT (13H1P) SCREW (6A-17040FD2) × 2 TRIPOD FIX PLATE (13C2V) Boss × 2...
Page 84
2. TOP COVER OS-30P Do NOT apply to the red area.
ISO DIAL UNIT SPONGE (13C67) SPONGE (13C67) SHOOTING MODE LEVER (13B4P) SHOOTING MODE LEVER (13B4P) DN-C3HN Do NOT apply to the red area. SHEET (13B4U) SHEET (13B4U)
Page 86
Align the position in the figure. SHEET (13B4U) SPONGE (13B4T) DN-C3HN Direction for mounting SPONGE (13B4T) SPONGE (13B4T) SPONGE (13B4T)
Page 87
SCREW (6A-17035FD2) × 2 ISO DIAL BASE UNIT (13H1V) ISO DIAL BASE UNIT (13H1V) SPONGE (13B4T) DN-C3HN area FG-30 area Boss × 2 Do NOT apply to the red area. FG-30 STEEL BALL (T1-02000SX) STEEL BALL SPONGE (T1-02000SX) (13C66) SPRING (13B4M) MDF-1176BE SPRING (13B4M)
Page 88
DIAL LOCK BUTTON CAP (13B4F) DIAL LOCK BUTTON CAP (13B4F) TAPE (134S3) TAPE (134S3) ISO DIAL UNIT (13H1U) DN-C3HN area FG-30 area Do NOT apply to the red area.
Page 89
ISO DIAL UNIT (13H1U) ISO DIAL UNIT (13H1U) Index Align the position in the figure. MDF-1176BE SPRING (13B4M) SPRING (13B4M) SCREW (6E-17035FA) STEEL BALL (T1-02000SX) FG-30 BRUSH UNIT (13B4V) STEEL BALL Boss (T1-02000SX)
Page 90
SCREW (134YD) BRUSH UNIT (134TA) Match the shape. Do NOT apply to the red area. OS-30P...
HOT SHOE FPC UNIT HOT SHOE UNIT (1C998-039) HOT SHOE MOLD UNIT (11X05) HOT SHOE UNIT (1C998-039) HOT SHOE MOLD UNIT (11X05) Boss Mountain-fold HOT SHOE FPC UNIT (13H2C)
Page 92
HOT SHOE FPC UNIT (13H2C) Boss × 6 SCREW (1331C) × 4 HOT SHOE FPC UNIT (13H2C)
Page 93
HOT SHOE FPC UNIT (13H2C) Solder × 2 Solder × 2 MONITOR SWITCHING BUTTON (13C4W) MONITOR SWITCHING BUTTON (13C4W) MONITOR SWITCHING BUTTON (13C4W) HOT SHOE FPC UNIT (13H2C) SCREW (6E-17030FD2) Boss × 2 MONITOR SWITCHING BUTTON (13C4W) HOT SHOE FPC UNIT (13H2C)
Page 94
HOT SHOE FPC UNIT (13H2C) SCREW (6E-17030FD2) × 2 Boss × 2 HOT SHOE FPC UNIT (13H2C) Boss × 2 RUBBER (12A3G) Double stick tape...
Page 95
HOT SHOE FPC SCREW UNIT (13H2C) HOT SHOE FPC (6A-17035FD2) UNIT (13H2C) Boss × 2 SCREW (6A-17035FD2) CHARGE LED WINDOW (13C53) CHARGE HOT SHOE FPC UNIT (13H2C) WINDOW (13C53) Do NOT touch red area. AF ASSIST LAMP WINDOW (13C4Z) HOT SHOE FPC UNIT (13H2C) AF ASSIST LAMP WINDOW (13C4Z)
Page 96
PLAYBACK/ DELETE BUTTON PLAYBACK/ (13C4T) DELETE HOT SHOE HOT SHOE BUTTON FPC UNIT FPC UNIT (13C4T) (13H2C) (13H2C) Boss × 3 Boss × 2...
Page 97
AF ASSIST LAMP BASE UNIT (13H1X) Boss × 2 Do NOT apply to the red area. PL-1016EL SCREW (6A-17035FD2) × 2 Boss × 3...
EXPOSURE COMPENSATION DIAL UNIT FG-30 EXPOSURE EXPOSURE COMPENSATION COMPENSATION DIAL UNIT DIAL UNIT (13B90) Align the position in the (13B90) figure. Do NOT apply to the red area. EXPOSURE COMPENSATION DIAL UNIT (13B90) Index DIAL BASE UNIT (13H21) SCREW (6A-17035FD2) FG-30 ×...
Page 102
CLICK PIN (13B8X) × 2 CLICK PIN (13B8X) FG-30 SPRING (13B99) SPRING (13B99) SPRING (13B99) MDF-1176BE DIAL BASE UNIT (13H21) SCREW (13B9D) BRUSH BASE UNIT (13B9E) FG-30 Match the shape. BRUSH BASE UNIT (13B9E) Do NOT apply to the red area.
SHUTTER DIAL UNIT SPONGE SPONGE (13C68) (13C68) VIDEO VIDEO SWITCHING LEVER (13B54) SWITCHING LEVER (13B54) DN-C3HN Do NOT apply to the red area. Marking SHEET (13B4U) Reference position for mounting SHEET (13B4U) Index Align the position in the figure.
Page 104
SPONGE (13B4T) Direction for mounting SPONGE (13B4T) OS-30P SPONGE (13B4T) SPONGE (13B4T) SCREW (6A-17035FD2) × 2 DIAL BASE UNIT (13H22) DIAL BASE UNIT (13H22) SPONGE (13B4T) DN-C3HN area Boss FG-30 area × 2 Do NOT apply to the red area.
Page 105
DIAL LOCK BUTTON CAP (13B4F) DIAL LOCK BUTTON CAP (13B4F) TAPE (134S3) TAPE (134S3) SHUTTER DIAL UNIT (13H24) DN-C3HN FG-30 area area Do NOT apply to the red area.
Page 106
FG-30 STEEL BALL (T1-02000SX) STEEL BALL MDF-1176BE (T1-02000SX) SPONGE (13C66) SPRING (13B4M) SPRING (13B4M) SHUTTER DIAL UNIT (13H24) Index SHUTTER DIAL UNIT (13H24) Align the position in the figure.
Page 107
SPRING (13B4M) SPRING (13B4M) MDF-1176BE STEEL BALL (T1-02000SX) STEEL BALL (T1-02000SX) FG-30 SCREW (6E-17035FA) BRUSH UNIT (13B4V) Boss...
SHUTTER DIAL FPC UNIT Do NOT apply to the red area. SHUTTER DIAL FPC UNIT (13H26) PL-1016EL DN-C3HN SCREW (6E-17035FD2) × 2 SHUTTER DIAL FPC UNIT (13H26) Boss × 2...
Page 111
SCREW (6A-17035FD2) Boss × 2 RUBBER (12A3G) Boss × 2 RUBBER (12A3G) SPRING (13C2D) MDF-1176BE SPRING (13C2D) STEEL BALL (T2-02300SX) STEEL BALL (T2-02300SX) MG-74CM...
VIDEO BUTTON (13C5A) Boss × 2 DIAL BASE UNIT SCREW (6A-17045FD2) × 2 SCREW (6A-17035FD2) × 2 DIAL BASE UNIT (13H2A) Boss × 5 PL-1016EL Do NOT apply to the red area.
DIAL BASE UNIT (13H2A) Double stick tape Boss MAIN COMMAND DIAL UNIT Do NOT apply to the red area. SCREW (13E1V) × 2 MAIN COMMAND DIAL UNIT OS-30P (13H2B) MAIN COMMAND DIAL UNIT (13H2B) OS-30P Do NOT apply to the red area.
Page 114
Boss × 2 PL-1016EL Patterned surface of the encoder DIAL BASE UNIT (13H2A) DIAL BASE Guide UNIT (13H2A) SCREW (6A-14035FA) × 2 BRUSH COVER (13B9Z) Boss × 2 BRUSH UNIT (13B8G) Reference position for mounting...
Page 115
OS-30P SPONGE (13C5C) SPONGE (13C5C) SPONGE (13C5C) Reference position for attachment SPONGE OS-30P (13C5E) SPONGE (13C5E) Reference position for attachment SPONGE (13C5E)
Page 116
LOGO PLATE (13C59) Boss × 2 SCREW (6A-17045FD2) × 2 SCREW (6A-17045FD2) EVF support plate Top cover heat sink Boss × 2...
Page 117
SCREW (6A-17045FD2) × 3 Top cover heat sink unit Boss × 2 Reference position for attachment TOP LCD WINDOW (13B9M) TOP LCD WINDOW (13B9M) Double stick tape...
3. EYEPIECE BLOCK UNIT EYEPIECE BARREL UNIT DOUBLE-SIDE TAPE (13B7P) DOUBLE- SIDE TAPE (13B7P) Reference position for attachment SPRING (127MZ) Shaft...
Shaft × 2 EYEPIECE BARREL UNIT (129PT) EYEPIECE BARREL UNIT (129PT) Shaft EYEPIECE BARREL UNIT (129PT) Shaft DIOPTER ADJUST UNIT SCREW (6A-17040FA) DIOPTER ADJUST UNIT (13H01) Boss × 2...
EYEPIECE BLOCK UNIT EYE SENSOR GND METAL PLATE (13B7M) Boss × 2 EYEPIECE BLOCK UNIT (13H02) SPONGE (13B7W) OS-30P SPONGE SPONGE (13B7W) (13B7W) DN-C3HN...
Page 121
SPRING (1K220-676) SPRING DN-C3HN (1K220-676) Projecting section EYEPIECE LOCK BUTTON (13B7V) SCREW (6A-17040FA) × 4 DN-C3HN Boss × 2...
Page 122
OS-30P SCREW (13B87) Match the shape. SPONGE (13B8D) SPONGE (13B8D) SPONGE (13B8D) DIOPTER ADJUST KNOB (13B86) SCREW (6A-17040FA) SPRING (13B88) SPRING (13B88) Match the shape. Boss × 2...
Page 123
DIOPTER ADJUST KNOB UNIT (13K1V) Match the shape. DIOPTER ADJUST KNOB (13B86) SPONGE SPONGE (13B7L) (13D2P) OS-30P...
Page 124
SPONGE (13B7L) SPONGE (13B7L) Reference position for attachment Attach to overlap. SPONGE (13D2P) SPONGE (13B7L) SPONGE (13D2P) Reference position for attachment...
IF COVER UNIT Do NOT apply to the red area. OS-30P IF COVER (HDMI SIDE; IF COVER (USB SIDE; 13C2M) 13C2L) OS-30P cover IF COVER UNIT (13S3J) IF COVER (HDMI SIDE; IF COVER 13C2M) Cut off if the parts (HDMI SIDE; IF COVER 13C2M) are replaced...
Page 136
IF COVER UNIT (13S3J) IF COVER UNIT SCREW (13S3J) (12R78) × 2 TRIPOD PLATE UNIT (12A18) Boss × 2...
NECK-STRAP RING The cutting part of the neck-strap ring (1K100-035) should be incorporated inside the neck-strap ring cover (1K685-799). Cutting part Cutting part NECK- NECK-STRAP STRAP RING RING (1K100-035) COVER (1K685-799) CFD409Z NECK-STRAP RING COVER (1K685-799) × 2 NECK-STRAP RING (1K100- NECK-STRAP RING 035) ×...
EYEPIECE UNIT EYEPIECE UNIT EYEPIECE UNIT (133MP-A100HZ) (133MP-A100HZ) EYEPIECE UNIT (133MP- A100HZ) LICENSE LABEL LICENSE LABEL (13C46) LICENSE LABEL (13C46) Reference position for attachment...
Switch Inspection Process Tools and parts required: ● Your mirrorless camera Switch inspection Follow the steps below to perform a switch inspection. Inspection procedure Check the switch Operate the all switches of camera and check whether the assigned function is working. ●...
– Focus charts can be purchased at stores that sell camera-related products or online stores that sell camera-related products. – Nikon hereby disclaims all responsibility and liability for any focus charts or other items purchased from third party retailers. Camera settings ●...
Page 146
● Diffraction correction: ON ● Automatic distortion correction: ON ● Vignette control: Standard ● Body VR: OFF ● Exposure delay mode: one to two seconds ● AF fine adjustment: OFF Shooting environment Install the camera/lens and chart, referring to the figure below. Shoot in a location that meets the following requirements: ●...
AF accuracy inspection Follow the steps below to inspect the AF accuracy. Inspection procedure Adjust the camera position 1. Adjust the shooting distance so that the entire focus chart is displayed on the screen as shown in the image below. •...
Page 148
Shoot the chart 1. Press the release button to shoot the target chart. 2. When checking before disassembling, check the inside of the red frame in the image, and record the focus position. 3. When checking after disassembling, confirm that there is no difference from the focus position recorded before disassembling.
– A Chart can be purchased at stores that sell camera-related products or online stores that sell camera-related products. – Nikon hereby disclaims all responsibility and liability for any focus charts or other items purchased from third party retailers. VR function inspection Follow the steps below to perform a VR function inspection.
Page 150
Camera settings Image quality FINE Focus mode AF-S Picture Control OFF / ON Image correction function (vignetting, diffraction, distortion) Metering method Center-weighted metering Exposure mode Shutter-priority auto (S) White balance Auto0 (Keep white) Aperture F4(Full open), The reciprocal of the focal length of a lens Shutter Speed (For example, if use a 50mm lens, set it to 1/50.)
Need help?
Do you have a question about the Z f and is the answer not in the manual?
Questions and answers